diff options
Diffstat (limited to 'keyboards/evyd13')
84 files changed, 217 insertions, 1563 deletions
diff --git a/keyboards/evyd13/atom47/rev2/config.h b/keyboards/evyd13/atom47/rev2/config.h index a314395501..2f09e7d1d0 100644 --- a/keyboards/evyd13/atom47/rev2/config.h +++ b/keyboards/evyd13/atom47/rev2/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -32,12 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -49,9 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 4 -#define LED_CAPS_LOCK_PIN F5 -#define LED_PIN_ON_STATE 1 - #define RGB_DI_PIN D0 // The pin the LED strip is connected to #define RGBLED_NUM 1 // Number of LEDs in your strip diff --git a/keyboards/evyd13/atom47/rev2/info.json b/keyboards/evyd13/atom47/rev2/info.json index 6a57c77d64..2083187e07 100644 --- a/keyboards/evyd13/atom47/rev2/info.json +++ b/keyboards/evyd13/atom47/rev2/info.json @@ -8,6 +8,11 @@ "pid": "0x8E66", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "F5" + }, + "processor": "atmega32u4", + "bootloader": "qmk-dfu", "layouts": { "LAYOUT_split_space": { "layout": [ diff --git a/keyboards/evyd13/atom47/rev3/config.h b/keyboards/evyd13/atom47/rev3/config.h index b670b014e5..69814659e6 100644 --- a/keyboards/evyd13/atom47/rev3/config.h +++ b/keyboards/evyd13/atom47/rev3/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -32,21 +31,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Backlight configuration */ #define BACKLIGHT_PIN B6 #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 5 -#define LED_CAPS_LOCK_PIN E6 -#define LED_PIN_ON_STATE 0 - #define RGB_DI_PIN F5 // The pin the LED strip is connected to #define RGBLED_NUM 6 // Number of LEDs in your strip #define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/evyd13/atom47/rev3/info.json b/keyboards/evyd13/atom47/rev3/info.json index bbeaea667e..ee044a58e7 100644 --- a/keyboards/evyd13/atom47/rev3/info.json +++ b/keyboards/evyd13/atom47/rev3/info.json @@ -8,6 +8,12 @@ "pid": "0x0E6D", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "E6", + "on_state": 0 + }, + "processor": "atmega32u4", + "bootloader": "qmk-dfu", "layouts": { "LAYOUT_split_space": { "layout": [ diff --git a/keyboards/evyd13/atom47/rev4/config.h b/keyboards/evyd13/atom47/rev4/config.h index 8d8b477e4a..de068ee8c4 100644 --- a/keyboards/evyd13/atom47/rev4/config.h +++ b/keyboards/evyd13/atom47/rev4/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -34,18 +33,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Backlight configuration */ #define QMK_ESC_OUTPUT C4 // usually COL #define QMK_ESC_INPUT C6 // usually ROW #define QMK_LED D1 - -#define LED_CAPS_LOCK_PIN D1 -#define LED_PIN_ON_STATE 0 diff --git a/keyboards/evyd13/atom47/rev4/info.json b/keyboards/evyd13/atom47/rev4/info.json index 8e117850cb..3c64f506a0 100644 --- a/keyboards/evyd13/atom47/rev4/info.json +++ b/keyboards/evyd13/atom47/rev4/info.json @@ -8,6 +8,12 @@ "pid": "0x8446", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "D1", + "on_state": 0 + }, + "processor": "atmega32u2", + "bootloader": "qmk-dfu", "layouts": { "LAYOUT_split_space": { "layout": [ diff --git a/keyboards/evyd13/atom47/rev4/rules.mk b/keyboards/evyd13/atom47/rev4/rules.mk index 3bce3b43af..1eb7c8bd08 100644 --- a/keyboards/evyd13/atom47/rev4/rules.mk +++ b/keyboards/evyd13/atom47/rev4/rules.mk @@ -1,6 +1,3 @@ -# MCU name -MCU = atmega32u2 - # Build Options ENCODER_ENABLE = yes BACKLIGHT_ENABLE = no diff --git a/keyboards/evyd13/atom47/rev5/config.h b/keyboards/evyd13/atom47/rev5/config.h index 9a751580db..e965023763 100644 --- a/keyboards/evyd13/atom47/rev5/config.h +++ b/keyboards/evyd13/atom47/rev5/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -39,69 +38,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -//#define LED_NUM_LOCK_PIN B0 -//#define LED_CAPS_LOCK_PIN B1 -//#define LED_SCROLL_LOCK_PIN B2 -//#define LED_COMPOSE_PIN B3 -//#define LED_KANA_PIN B4 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - -//#define RGB_DI_PIN E2 -//#ifdef RGB_DI_PIN -//# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -//#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -118,10 +59,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 - // This is a 7-bit address, that gets left-shifted and bit 0 // set to 0 for write, 1 for read (as per I2C protocol) // The address will vary depending on your wiring: diff --git a/keyboards/evyd13/atom47/rev5/info.json b/keyboards/evyd13/atom47/rev5/info.json index 4ecc240182..847cac0b73 100644 --- a/keyboards/evyd13/atom47/rev5/info.json +++ b/keyboards/evyd13/atom47/rev5/info.json @@ -8,6 +8,8 @@ "pid": "0x92EA", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "qmk-dfu", "layouts": { "LAYOUT_split_space": { "layout": [ diff --git a/keyboards/evyd13/atom47/rules.mk b/keyboards/evyd13/atom47/rules.mk index 1ba88ed80b..ab8264de7c 100644 --- a/keyboards/evyd13/atom47/rules.mk +++ b/keyboards/evyd13/atom47/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = qmk-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/evyd13/eon40/config.h b/keyboards/evyd13/eon40/config.h index d52172b6fa..e990c53fd1 100644 --- a/keyboards/evyd13/eon40/config.h +++ b/keyboards/evyd13/eon40/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -41,68 +40,11 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap |