3 files changed, 17 insertions, 73 deletions
diff --git a/keyboards/evyd13/wasdat_code/config.h b/keyboards/evyd13/wasdat_code/config.h
index 5449532862..98acf00d75 100644
--- a/keyboards/evyd13/wasdat_code/config.h
+++ b/keyboards/evyd13/wasdat_code/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 8
@@ -39,75 +38,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SN74X138_ADDRESS_PINS { D2, D1, D0 }
 #define SN74X138_E3_PIN D4
 
-// For QMK DFU
-#define QMK_ESC_OUTPUT E6
-#define QMK_ESC_INPUT F0
-#define QMK_LED B1
-
-#define LED_NUM_LOCK_PIN B3
-#define LED_CAPS_LOCK_PIN B1
-#define LED_SCROLL_LOCK_PIN B2
-#define LED_PIN_ON_STATE 0
-
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 5
 
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -124,8 +63,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 2
-#define BOOTMAGIC_LITE_COLUMN 3
-
 #define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/evyd13/wasdat_code/info.json b/keyboards/evyd13/wasdat_code/info.json
index 4ebbc5aa15..94ab350e9c 100644
--- a/keyboards/evyd13/wasdat_code/info.json
+++ b/keyboards/evyd13/wasdat_code/info.json
@@ -8,6 +8,23 @@
         "pid": "0xB00E",
         "device_version": "0.0.1"
     },
+    "qmk_lufa_bootloader": {
+        "esc_input": "F0",
+        "esc_output": "E6",
+        "led": "B1"
+    },
+    "indicators": {
+        "caps_lock": "B1",
+        "num_lock": "B3",
+        "scroll_lock": "B2",
+        "on_state": 0
+    },
+    "bootmagic": {
+        "matrix": [2, 3]
+    },
+    "processor": "atmega32u4",
+    "bootloader": "qmk-dfu",
+    "community_layouts": ["fullsize_ansi", "fullsize_iso", "tkl_ansi", "tkl_iso"],
     "layouts": {
         "LAYOUT_fullsize_ansi": {
             "layout": [
diff --git a/keyboards/evyd13/wasdat_code/rules.mk b/keyboards/evyd13/wasdat_code/rules.mk
index b37dfa459c..00967d1847 100644
--- a/keyboards/evyd13/wasdat_code/rules.mk
+++ b/keyboards/evyd13/wasdat_code/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = qmk-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -20,5 +14,3 @@ AUDIO_ENABLE = no           # Audio output
 CUSTOM_MATRIX = lite
 VPATH += drivers/gpio
 SRC += matrix.c sn74x138.c
-
-LAYOUTS = fullsize_ansi fullsize_iso tkl_ansi tkl_iso