3 files changed, 30 insertions, 107 deletions
diff --git a/keyboards/evyd13/wasdat/config.h b/keyboards/evyd13/wasdat/config.h
index e151496aed..821cc26b65 100644
--- a/keyboards/evyd13/wasdat/config.h
+++ b/keyboards/evyd13/wasdat/config.h
@@ -19,13 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0x4705
-#define PRODUCT_ID      0xC474
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Evyd13
-#define PRODUCT         Wasdat
-
 /* key matrix size */
 #define MATRIX_ROWS 8
 #define MATRIX_COLS 16
@@ -46,87 +39,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define SN74X138_ADDRESS_PINS { D2, D1, D0 }
 
-// For QMK DFU
-#define QMK_ESC_OUTPUT D6
-#define QMK_ESC_INPUT D7
-#define QMK_LED B0
-
-#define LED_NUM_LOCK_PIN B2
-#define LED_CAPS_LOCK_PIN B0
-#define LED_SCROLL_LOCK_PIN B1
 #define LED_PIN_ON_STATE 0
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-//   #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/evyd13/wasdat/info.json b/keyboards/evyd13/wasdat/info.json
index 23e59c6b33..32a25d96d2 100644
--- a/keyboards/evyd13/wasdat/info.json
+++ b/keyboards/evyd13/wasdat/info.json
@@ -1,7 +1,36 @@
 {
     "keyboard_name": "Wasdat",
+    "manufacturer": "Evyd13",
     "url": "https://maartenwut.com/product/wasdat/",
     "maintainer": "evyd13",
+    "processor": "atmega32u4",
+    "bootloader": "qmk-dfu",
+    "usb": {
+        "vid": "0x4705",
+        "pid": "0xC474",
+        "device_version": "0.0.1",
+    },
+    "qmk_lufa_bootloader": {
+        "esc_output": "D6",
+        "esc_input": "D7",
+        "led": "B0"
+    },
+    "features": {
+        "bootmagic": true,
+        "extrakey": true,
+        "nkro": true,
+    },
+    "indicators": {
+        "num_lock": "B2",
+        "caps_lock": "B0",
+        "scroll_lock": "B1"
+    },
+    "community_layouts": [
+        "fullsize_ansi",
+        "fullsize_iso",
+        "tkl_ansi",
+        "tkl_iso"
+    ],
     "layouts": {
         "LAYOUT_fullsize_ansi": {
             "layout": [
diff --git a/keyboards/evyd13/wasdat/rules.mk b/keyboards/evyd13/wasdat/rules.mk
index bb4261a4fe..64eebdfac4 100644
--- a/keyboards/evyd13/wasdat/rules.mk
+++ b/keyboards/evyd13/wasdat/rules.mk
@@ -1,24 +1,4 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = qmk-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 CUSTOM_MATRIX = lite
+
 VPATH += drivers/gpio
 SRC += matrix.c sn74x138.c
-
-LAYOUTS = fullsize_ansi fullsize_iso tkl_ansi tkl_iso