1 files changed, 0 insertions, 96 deletions
diff --git a/keyboards/ergodox_infinity/board_st7565.h b/keyboards/ergodox_infinity/board_st7565.h
deleted file mode 100644
index 875ed9e65c..0000000000
--- a/keyboards/ergodox_infinity/board_st7565.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-#include "quantum.h"
-
-#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
-#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER 0, 1, 2, 3
-/*
- * Custom page order for several LCD boards, e.g. HEM12864-99
- * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
- */
-
-#define ST7565_A0_PIN C7
-#define ST7565_RST_PIN C8
-#define ST7565_MOSI_PIN C6
-#define ST7565_SCLK_PIN C5
-#define ST7565_SS_PIN C4
-
-// DSPI Clock and Transfer Attributes
-// Frame Size: 8 bits
-// MSB First
-// CLK Low by default
-static const SPIConfig spi1config = {
-    // Operation complete callback or @p NULL.
-    .end_cb = NULL,
-    // The chip select line port - when not using pcs.
-    .ssport = PAL_PORT(ST7565_SS_PIN),
-    // brief The chip select line pad number - when not using pcs.
-    .sspad = PAL_PAD(ST7565_SS_PIN),
-    // SPI initialization data.
-    .tar0 = SPIx_CTARn_FMSZ(7)     // Frame size = 8 bytes
-            | SPIx_CTARn_ASC(1)    // After SCK Delay Scaler (min 50 ns) = 55.56ns
-            | SPIx_CTARn_DT(0)     // Delay After Transfer Scaler (no minimum)= 27.78ns
-            | SPIx_CTARn_CSSCK(0)  // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
-            | SPIx_CTARn_PBR(0)    // Baud Rate Prescaler = 2
-            | SPIx_CTARn_BR(0)     // Baud rate (min 50ns) = 55.56ns
-};
-
-static GFXINLINE void acquire_bus(GDisplay *g) {
-    (void)g;
-    // Only the LCD is using the SPI bus, so no need to acquire
-    // spiAcquireBus(&SPID1);
-    spiSelect(&SPID1);
-}
-
-static GFXINLINE void release_bus(GDisplay *g) {
-    (void)g;
-    // Only the LCD is using the SPI bus, so no need to release
-    // spiReleaseBus(&SPID1);
-    spiUnselect(&SPID1);
-}
-
-static GFXINLINE void init_board(GDisplay *g) {
-    (void)g;
-    setPinOutput(ST7565_A0_PIN);
-    writePinHigh(ST7565_A0_PIN);
-    setPinOutput(ST7565_RST_PIN);
-    writePinHigh(ST7565_RST_PIN);
-    setPinOutput(ST7565_SS_PIN);
-
-    palSetPadMode(PAL_PORT(ST7565_MOSI_PIN), PAL_PAD(ST7565_MOSI_PIN), PAL_MODE_ALTERNATIVE_2);
-    palSetPadMode(PAL_PORT(ST7565_SCLK_PIN), PAL_PAD(ST7565_SCLK_PIN), PAL_MODE_ALTERNATIVE_2);
-
-    spiInit();
-    spiStart(&SPID1, &spi1config);
-    release_bus(g);
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) { (void)g; }
-
-static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
-    (void)g;
-    writePin(ST7565_RST_PIN, !state);
-}
-
-static GFXINLINE void write_cmd(GDisplay *g, gU8 cmd) {
-    (void)g;
-    writePinLow(ST7565_A0_PIN);
-    spiSend(&SPID1, 1, &cmd);
-}
-
-static GFXINLINE void write_data(GDisplay *g, gU8 *data, gU16 length) {
-    (void)g;
-    writePinHigh(ST7565_A0_PIN);
-    spiSend(&SPID1, length, data);
-}
-
-#endif /* _GDISP_LLD_BOARD_H */