4 files changed, 84 insertions, 102 deletions
diff --git a/keyboards/ergodox/infinity/Makefile b/keyboards/ergodox/infinity/Makefile
index ccb735a485..191c6bb664 100644
--- a/keyboards/ergodox/infinity/Makefile
+++ b/keyboards/ergodox/infinity/Makefile
@@ -1,77 +1,3 @@
-# project specific files
-SRC =	matrix.c \
-	led.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-# - For Infinity KB, SERIES = K20x
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-#   - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
-#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
-MCU_LDSCRIPT = MK20DX256BLDR8
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0 and Infinity 60%
-#   - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
-MCU_STARTUP = k20x7
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-#   - MCHCK_K20 for Infinity KB
-#BOARD = MCHCK_K20
-BOARD = PJRC_TEENSY_3_1
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
-
-# Build Options
-#   comment out to disable the options.
-#
-CUSTOM_MATRIX ?= yes # Custom matrix file
-SERIAL_LINK_ENABLE = yes
-VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile
-LCD_ENABLE ?= yes
-LED_ENABLE ?= yes
-LCD_BACKLIGHT_ENABLE ?= yes
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
-endif
-
-ifdef LCD_ENABLE
-include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
-endif
-
-ifdef LED_ENABLE
-include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
-endif
+endif
+\ No newline at end of file
diff --git a/keyboards/ergodox/infinity/infinity.c b/keyboards/ergodox/infinity/infinity.c
index c5793385fe..02db67eaf2 100644
--- a/keyboards/ergodox/infinity/infinity.c
+++ b/keyboards/ergodox/infinity/infinity.c
@@ -38,7 +38,6 @@ void init_serial_link_hal(void) {
 // Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced
 // Which will reduce the brightness range
 #define PRESCALAR_DEFINE 0
-#ifdef VISUALIZER_ENABLE
 void lcd_backlight_hal_init(void) {
 	// Setup Backlight
     SIM->SCGC6 |= SIM_SCGC6_FTM0;
@@ -76,7 +75,6 @@ void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) {
 	CHANNEL_GREEN.CnV = g;
 	CHANNEL_BLUE.CnV = b;
 }
-#endif
 
 __attribute__ ((weak))
 void matrix_init_user(void) {
@@ -92,6 +90,10 @@ void matrix_init_kb(void) {
 	// runs once when the firmware starts up
 
 	matrix_init_user();
+	// The backlight always has to be initialized, otherwise it will stay lit
+#ifndef VISUALIZER_ENABLE
+	lcd_backlight_hal_init();
+#endif
 }
 
 void matrix_scan_kb(void) {
diff --git a/keyboards/ergodox/infinity/led.c b/keyboards/ergodox/infinity/led.c
index 77195bb358..8175c1c5c5 100644
--- a/keyboards/ergodox/infinity/led.c
+++ b/keyboards/ergodox/infinity/led.c
@@ -21,29 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 void led_set(uint8_t usb_led) {
-// The LCD backlight functionality conflicts with this simple
-// red backlight
-#if !defined(LCD_BACKLIGHT_ENABLE) && defined(STATUS_LED_ENABLE)
-    // PTC1: LCD Backlight Red(0:on/1:off)
-    GPIOC->PDDR |= (1<<1);
-    PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        GPIOC->PCOR |= (1<<1);
-    } else {
-        GPIOC->PSOR |= (1<<1);
-    }
-#elif !defined(LCD_BACKLIGHT_ENABLE)
+    //TODO: Add led emulation if there's no customized visualization
     (void)usb_led;
-    GPIOC->PDDR |= (1<<1);
-    PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
-    GPIOC->PSOR |= (1<<1);
-    GPIOC->PDDR |= (1<<2);
-    PORTC->PCR[2] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
-    GPIOC->PSOR |= (1<<2);
-    GPIOC->PDDR |= (1<<3);
-    PORTC->PCR[3] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
-    GPIOC->PSOR |= (1<<3);
-#else
-    (void)usb_led;
-#endif
 }
diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk
new file mode 100644
index 0000000000..ccb735a485
--- /dev/null
+++ b/keyboards/ergodox/infinity/rules.mk
@@ -0,0 +1,77 @@
+# project specific files
+SRC =	matrix.c \
+	led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+# - For Infinity KB, SERIES = K20x
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+#   - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
+#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
+MCU_LDSCRIPT = MK20DX256BLDR8
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0 and Infinity 60%
+#   - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
+MCU_STARTUP = k20x7
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+#   - MCHCK_K20 for Infinity KB
+#BOARD = MCHCK_K20
+BOARD = PJRC_TEENSY_3_1
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
+
+# Build Options
+#   comment out to disable the options.
+#
+CUSTOM_MATRIX ?= yes # Custom matrix file
+SERIAL_LINK_ENABLE = yes
+VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile
+LCD_ENABLE ?= yes
+LED_ENABLE ?= yes
+LCD_BACKLIGHT_ENABLE ?= yes
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
+ifdef LCD_ENABLE
+include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
+endif
+
+ifdef LED_ENABLE
+include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
+endif