diff options
Diffstat (limited to 'keyboards/ebastler/e80_1800/readme.md')
| -rw-r--r-- | keyboards/ebastler/e80_1800/readme.md | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/keyboards/ebastler/e80_1800/readme.md b/keyboards/ebastler/e80_1800/readme.md new file mode 100644 index 0000000000..87fd9756b6 --- /dev/null +++ b/keyboards/ebastler/e80_1800/readme.md @@ -0,0 +1,25 @@ +# E80-1800 + + + +A replacement PCB for the Cherry G80-1800 keyboard. Supports ISO and ANSI, 6u offcenter or 7u bottom row, stepped and regular caps lock. Optional i2c header for OLED. Type-C on the PCB (requires some case modifications). The PCB is open source and can be found in my [Github repo](https://github.com/ebastler/E80-1800). + +* Keyboard Maintainer: [ebastler](https://github.com/ebastler) +* Hardware Supported: r1 and r1.1 PCB, see Github repo linked above +* Hardware Availability: Groupbuy, otherwise feel free to order your own boards. jlcpcb compatible gerber/BOM/CPL files are included. + +How to enter the Bootloader: +* No pre-flashed firmware, option 1: Bridge `BOOT` labeled pads below spacebar while plugging the board in +* No pre-flashed firmware, option 2: Bridge `BOOT` labeled pads below spacebar, then quickly short `RST` labeled pads +* Pre-flashed firmware: Use Bootmagic - keep the `ESC` (top left most) key pressed while plugging the board in + +Make example for this keyboard (after setting up your build environment): + + make ebastler/e80_1800:default + +Flash example for this keyboard (after setting up your build environment): + + make ebastler/e80_1800:default + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file |