summaryrefslogtreecommitdiffstats
path: root/keyboards/dztech/dz40rgb
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/dztech/dz40rgb')
-rw-r--r--keyboards/dztech/dz40rgb/bootloader_defs.h7
-rw-r--r--keyboards/dztech/dz40rgb/chconf.h520
-rw-r--r--keyboards/dztech/dz40rgb/config.h2
-rw-r--r--keyboards/dztech/dz40rgb/dz40rgb.c172
-rw-r--r--keyboards/dztech/dz40rgb/halconf.h388
-rw-r--r--keyboards/dztech/dz40rgb/keymaps/default/keymap.c10
-rw-r--r--keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c10
-rw-r--r--keyboards/dztech/dz40rgb/mcuconf.h257
-rw-r--r--keyboards/dztech/dz40rgb/rules.mk47
9 files changed, 49 insertions, 1364 deletions
diff --git a/keyboards/dztech/dz40rgb/bootloader_defs.h b/keyboards/dztech/dz40rgb/bootloader_defs.h
deleted file mode 100644
index 3b0e9d20a6..0000000000
--- a/keyboards/dztech/dz40rgb/bootloader_defs.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
diff --git a/keyboards/dztech/dz40rgb/chconf.h b/keyboards/dztech/dz40rgb/chconf.h
deleted file mode 100644
index 1d9f12ff1f..0000000000
--- a/keyboards/dztech/dz40rgb/chconf.h
+++ /dev/null
@@ -1,520 +0,0 @@
-/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION 32
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY 100000
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#define CH_CFG_ST_TIMEDELTA 2
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- * @note The round robin preemption is not supported in tickless mode and
- * must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM 0
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE 0
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread. The application @p main()
- * function becomes the idle thread and must implement an
- * infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_TM TRUE
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY TRUE
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT TRUE
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES TRUE
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES TRUE
-
-/**
- * @brief Enables recursive behavior on mutexes.
- * @note Recursive mutexes are heavier and have an increased
- * memory footprint.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS TRUE
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS TRUE
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES TRUE
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY TRUE
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES TRUE
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE TRUE
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- * @p CH_CFG_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP TRUE
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS TRUE
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_WAITEXIT.
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS FALSE
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS FALSE
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS FALSE
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief Trace buffer entries.
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- * different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE 128
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK TRUE
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS FALSE
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p FALSE.
- * @note This debug option is not currently compatible with the
- * tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* Context switch code here.*/ \
-}
-
-/**
- * @brief ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
- /* IRQ prologue code here.*/ \
-}
-
-/**
- * @brief ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
- /* IRQ epilogue code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
- /* Idle-enter code here.*/ \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
- /* Idle-leave code here.*/ \
-}
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() { \
- /* System tick event code here.*/ \
-}
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
- /* System halt code here.*/ \
-}
-
-/**
- * @brief Trace hook.
- * @details This hook is invoked each time a new record is written in the
- * trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) { \
- /* Trace code here.*/ \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* CHCONF_H */
-
-/** @} */
diff --git a/keyboards/dztech/dz40rgb/config.h b/keyboards/dztech/dz40rgb/config.h
index 0d6c4ae39a..5f1502f4af 100644
--- a/keyboards/dztech/dz40rgb/config.h
+++ b/keyboards/dztech/dz40rgb/config.h
@@ -21,7 +21,7 @@
#define DEBOUNCE 3
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
#define RGB_MATRIX_KEYPRESSES
#define DISABLE_RGB_MATRIX_SPLASH
#define DISABLE_RGB_MATRIX_MULTISPLASH
diff --git a/keyboards/dztech/dz40rgb/dz40rgb.c b/keyboards/dztech/dz40rgb/dz40rgb.c
index b1a03760f8..92e4a7cad3 100644
--- a/keyboards/dztech/dz40rgb/dz40rgb.c
+++ b/keyboards/dztech/dz40rgb/dz40rgb.c
@@ -52,7 +52,7 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
{0, E_3, D_3, F_3},
{0, E_2, D_2, F_2},
{0, E_1, D_1, F_1},
-
+
{0, E_13, D_13, F_13},
{0, E_14, D_14, F_14},
@@ -71,70 +71,25 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
};
-const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-
- {{0|(11<<4)}, {20.36*11, 0}, 1},
- {{0|(10<<4)}, {20.36*10, 0}, 1},
- {{0|(9<<4)}, {20.36*9, 0}, 1},
- {{0|(8<<4)}, {20.36*8, 0}, 1},
- {{0|(7<<4)}, {20.36*7, 0}, 1},
- {{0|(6<<4)}, { 20.36*6, 0}, 1},
- {{0|(5<<4)}, { 20.36*5, 0}, 1},
- {{0|(4<<4)}, { 20.36*4, 0}, 1},
- {{0|(3<<4)}, { 20.36*3, 0}, 1},
- {{0|(2<<4)}, { 20.36*2, 0}, 1},
- {{0|(1<<4)}, { 20.36*1, 0}, 1},
- {{0|(0<<4)}, { 20.36*0, 0}, 1},
-
- {{0|(12<<4)}, {20.36*11, 21.33*0.5}, 1},
- {{0|(13<<4)}, {20.36*0,21.33*0.5}, 1},
-
- {{1|(11<<4)}, {20.36*11, 21.33}, 1},
- {{1|(10<<4)}, {20.36*10, 21.33}, 0},
- {{1|(9<<4)}, {20.36*9, 21.33}, 0},
- {{1|(8<<4)}, {20.36*8, 21.33}, 0},
- {{1|(7<<4)}, {20.36*7, 21.33}, 0},
- {{1|(6<<4)}, { 20.36*6, 21.33}, 0},
- {{1|(5<<4)}, { 20.36*5, 21.33}, 0},
- {{1|(4<<4)}, { 20.36*4, 21.33}, 0},
- {{1|(3<<4)}, { 20.36*3, 21.33}, 0},
- {{1|(2<<4)}, { 20.36*2, 21.33}, 0},
- {{1|(1<<4)}, { 20.36*1, 21.33}, 0},
- {{1|(0<<4)}, { 20.36*0, 21.33}, 1},
-
- {{1|(12<<4)}, {20.36*11, 21.33*1.5}, 1},
- {{1|(13<<4)}, {20.36*0,21.33*1.5}, 1},
-
- {{2|(11<<4)}, {20.36*11, 21.33*2}, 1},
- {{2|(10<<4)}, {20.36*10, 21.33*2}, 0},
- {{2|(9<<4)}, {20.36*9, 21.33*2}, 0},
- {{2|(8<<4)}, {20.36*8, 21.33*2}, 0},
- {{2|(7<<4)}, {20.36*7, 21.33*2}, 0},
- {{2|(6<<4)}, { 20.36*6, 21.33*2}, 0},
- {{2|(5<<4)}, { 20.36*5, 21.33*2}, 0},
- {{2|(4<<4)}, { 20.36*4, 21.33*2}, 0},
- {{2|(3<<4)}, { 20.36*3, 21.33*2}, 0},
- {{2|(2<<4)}, { 20.36*2, 21.33*2}, 0},
- {{2|(1<<4)}, { 20.36*1, 21.33*2}, 0},
- {{2|(0<<4)}, { 20.36*0, 21.33*2}, 1},
+led_config_t g_led_config = { {
+ { 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 },
+ { 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 },
+ { 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, 28 },
+ { 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42 }
+}, {
+ { 223, 0 }, { 203, 0 }, { 183, 0 }, { 162, 0 }, { 142, 0 }, { 122, 0 }, { 101, 0 }, { 81, 0 }, { 61, 0 }, { 40, 0 }, { 20, 0 }, { 0, 0 },
+ { 223, 10 }, { 0, 10 }, { 223, 21 }, { 203, 21 }, { 183, 21 }, { 162, 21 }, { 142, 21 }, { 122, 21 }, { 101, 21 }, { 81, 21 }, { 61, 21 }, { 40, 21 },
+ { 20, 21 }, { 0, 21 }, { 223, 31 }, { 0, 31 }, { 223, 42 }, { 203, 42 }, { 183, 42 }, { 162, 42 }, { 142, 42 }, { 122, 42 }, { 101, 42 }, { 81, 42 },
+ { 61, 42 }, { 40, 42 }, { 20, 42 }, { 0, 42 }, { 223, 53 }, { 0, 53 }, { 223, 63 }, { 203, 63 }, { 183, 63 }, { 162, 63 }, { 142, 63 }, { 122, 63 },
+ { 101, 63 }, { 81, 63 }, { 61, 63 }, { 40, 63 }, { 20, 63 }, { 0, 63 }
+}, {
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1
+} };
- {{2|(12<<4)}, {20.36*11, 21.33*2.5}, 1},
- {{2|(13<<4)}, {20.36*0,21.33*2.5}, 1},
-
- {{3|(11<<4)}, {20.36*11, 21.33*3}, 1},
- {{3|(10<<4)}, {20.36*10, 21.33*3}, 1},
- {{3|(9<<4)}, {20.36*9, 21.33*3}, 1},
- {{3|(8<<4)}, {20.36*8, 21.33*3}, 1},
- {{3|(7<<4)}, {20.36*7, 21.33*3}, 1},
- {{3|(6<<4)}, { 20.36*6, 21.33*3}, 1},
- {{3|(5<<4)}, { 20.36*5, 21.33*3}, 1},
- {{3|(4<<4)}, { 20.36*4, 21.33*3}, 1},
- {{3|(3<<4)}, { 20.36*3, 21.33*3}, 1},
- {{3|(2<<4)}, { 20.36*2, 21.33*3}, 1},
- {{3|(1<<4)}, { 20.36*1, 21.33*3}, 1},
- {{3|(0<<4)}, { 20.36*0, 21.33*3}, 1}
-
-};
#else
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
@@ -205,93 +160,44 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
};
-const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-
- {{0|(11<<4)}, {20.36*11, 0}, 1},
- {{0|(10<<4)}, {20.36*10, 0}, 1},
- {{0|(9<<4)}, {20.36*9, 0}, 1},
- {{0|(8<<4)}, {20.36*8, 0}, 1},
- {{0|(7<<4)}, {20.36*7, 0}, 1},
- {{0|(6<<4)}, { 20.36*6, 0}, 1},
- {{0|(5<<4)}, { 20.36*5, 0}, 1},
- {{0|(4<<4)}, { 20.36*4, 0}, 1},
- {{0|(3<<4)}, { 20.36*3, 0}, 1},
- {{0|(2<<4)}, { 20.36*2, 0}, 1},
- {{0|(1<<4)}, { 20.36*1, 0}, 1},
- {{0|(0<<4)}, { 20.36*0, 0}, 1},
-
- {{0|(12<<4)}, {20.36*11, 21.33*0.5}, 1},
- {{0|(13<<4)}, {20.36*0,21.33*0.5}, 1},
-
- {{1|(11<<4)}, {20.36*11, 21.33}, 1},
- {{1|(10<<4)}, {20.36*10, 21.33}, 0},
- {{1|(9<<4)}, {20.36*9, 21.33}, 0},
- {{1|(8<<4)}, {20.36*8, 21.33}, 0},
- {{1|(7<<4)}, {20.36*7, 21.33}, 0},
- {{1|(6<<4)}, { 20.36*6, 21.33}, 0},
- {{1|(5<<4)}, { 20.36*5, 21.33}, 0},
- {{1|(4<<4)}, { 20.36*4, 21.33}, 0},
- {{1|(3<<4)}, { 20.36*3, 21.33}, 0},
- {{1|(2<<4)}, { 20.36*2, 21.33}, 0},
- {{1|(1<<4)}, { 20.36*1, 21.33}, 0},
- {{1|(0<<4)}, { 20.36*0, 21.33}, 1},
+led_config_t g_led_config = { {
+ { 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 },
+ { 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 },
+ { 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, 28 },
+ { 52, 51, 50, 49, 48, NO_LED, 47, 46, 45, 44, 43, 42 }
+}, {
+ { 223, 0 }, { 203, 0 }, { 183, 0 }, { 162, 0 }, { 142, 0 }, { 122, 0 }, { 101, 0 }, { 81, 0 }, { 61, 0 }, { 40, 0 }, { 20, 0 }, { 0, 0 },
+ { 223, 10 }, { 0, 10 }, { 223, 21 }, { 203, 21 }, { 183, 21 }, { 162, 21 }, { 142, 21 }, { 122, 21 }, { 101, 21 }, { 81, 21 }, { 61, 21 }, { 40, 21 },
+ { 20, 21 }, { 0, 21 }, { 223, 31 }, { 0, 31 }, { 223, 42 }, { 203, 42 }, { 183, 42 }, { 162, 42 }, { 142, 42 }, { 122, 42 }, { 101, 42 }, { 81, 42 },
+ { 61, 42 }, { 40, 42 }, { 20, 42 }, { 0, 42 }, { 223, 53 }, { 0, 53 }, { 223, 63 }, { 203, 63 }, { 183, 63 }, { 162, 63 }, { 142, 63 }, { 111, 63 },
+ { 81, 63 }, { 61, 63 }, { 40, 63 }, { 20, 63 }, { 0, 63 }
+}, {
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1
+} };
- {{1|(12<<4)}, {20.36*11, 21.33*1.5}, 1},
- {{1|(13<<4)}, {20.36*0,21.33*1.5}, 1},
-
- {{2|(11<<4)}, {20.36*11, 21.33*2}, 1},
- {{2|(10<<4)}, {20.36*10, 21.33*2}, 0},
- {{2|(9<<4)}, {20.36*9, 21.33*2}, 0},
- {{2|(8<<4)}, {20.36*8, 21.33*2}, 0},
- {{2|(7<<4)}, {20.36*7, 21.33*2}, 0},
- {{2|(6<<4)}, { 20.36*6, 21.33*2}, 0},
- {{2|(5<<4)}, { 20.36*5, 21.33*2}, 0},
- {{2|(4<<4)}, { 20.36*4, 21.33*2}, 0},
- {{2|(3<<4)}, { 20.36*3, 21.33*2}, 0},
- {{2|(2<<4)}, { 20.36*2, 21.33*2}, 0},
- {{2|(1<<4)}, { 20.36*1, 21.33*2}, 0},
- {{2|(0<<4)}, { 20.36*0, 21.33*2}, 1},
-
- {{2|(12<<4)}, {20.36*11, 21.33*2.5}, 1},
- {{2|(13<<4)}, {20.36*0,21.33*2.5}, 1},
-
- {{3|(11<<4)}, {20.36*11, 21.33*3}, 1},
- {{3|(10<<4)}, {20.36*10, 21.33*3}, 1},
- {{3|(9<<4)}, {20.36*9, 21.33*3}, 1},
- {{3|(8<<4)}, {20.36*8, 21.33*3}, 1},
- {{3|(7<<4)}, {20.36*7, 21.33*3}, 1},
- {{3|(6<<4)}, { 20.36*5.5, 21.33*3}, 1},
- {{3|(4<<4)}, { 20.36*4, 21.33*3}, 1},
- {{3|(3<<4)}, { 20.36*3, 21.33*3}, 1},
- {{3|(2<<4)}, { 20.36*2, 21.33*3}, 1},
- {{3|(1<<4)}, { 20.36*1, 21.33*3}, 1},
- {{3|(0<<4)}, { 20.36*0, 21.33*3}, 1}
-
-};
#endif
-
void matrix_init_kb(void) {
matrix_init_user();
}
-
-
void matrix_scan_kb(void) {
matrix_scan_user();
}
-
-
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
return process_record_user(keycode, record);
}
-
-
void suspend_power_down_kb(void)
{
rgb_matrix_set_suspend_state(true);
+ suspend_power_down_user();
}
void suspend_wakeup_init_kb(void)
{
rgb_matrix_set_suspend_state(false);
+ suspend_wakeup_init_user();
}
diff --git a/keyboards/dztech/dz40rgb/halconf.h b/keyboards/dztech/dz40rgb/halconf.h
deleted file mode 100644
index eda293c49b..0000000000
--- a/keyboards/dztech/dz40rgb/halconf.h
+++ /dev/null
@@ -1,388 +0,0 @@
-/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC TRUE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT TRUE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C TRUE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the QSPI subsystem.
- */
-#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
-#define HAL_USE_QSPI FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB TRUE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)