diff options
Diffstat (limited to 'keyboards/durgod/dgk6x/config.h')
| -rw-r--r-- | keyboards/durgod/dgk6x/config.h | 136 |
1 files changed, 0 insertions, 136 deletions
diff --git a/keyboards/durgod/dgk6x/config.h b/keyboards/durgod/dgk6x/config.h deleted file mode 100644 index bfb3f2ba9d..0000000000 --- a/keyboards/durgod/dgk6x/config.h +++ /dev/null @@ -1,136 +0,0 @@ -/* Copyright 2021 Jessica Sullivan and Don Kjer - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "config_common.h" - -#define WAIT_US_TIMER GPTD3 - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - -// Dynamic EEPROM -// Something sensible or else VIA may crash -// Users may enable more if they wish -#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 4095 - -// Increase VIA layer count -#define DYNAMIC_KEYMAP_LAYER_COUNT 16 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Bootmagic Lite key configuration */ -#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 - -/* LED indicator pins */ -#define LED_CAPS_LOCK_PIN C4 -#define LED_WIN_LOCK_PIN C5 -#define LED_SCROLL_LOCK_PIN A8 -#define LED_MR_LOCK_PIN LED_SCROLL_LOCK_PIN -#define LED_PIN_ON_STATE 0 - -#ifdef RGB_MATRIX_ENABLE -// This is a 7-bit address, that gets left-shifted and bit 0 -// set to 0 for write, 1 for read (as per I2C protocol) -// The address will vary depending on your wiring: -// 00 <-> GND -// 01 <-> SCL -// 10 <-> SDA -// 11 <-> VCC -// ADDR1 represents A1:A0 of the 7-bit address. -// ADDR2 represents A3:A2 of the 7-bit address. -// The result is: 0b101(ADDR2)(ADDR1) - -#define DRIVER_ADDR_1 0b1010000 -#define DRIVER_ADDR_2 0b1010011 - -#define DRIVER_COUNT 2 -#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) - -/* I2C Alternate function settings */ -#define I2C1_SCL_PAL_MODE 1 -#define I2C1_SDA_PAL_MODE 1 - -/* Set I2C speed to 400kHz, 300ns Tr, 14ns Tf */ -#define I2C1_TIMINGR_PRESC 0x1U -#define I2C1_TIMINGR_SCLDEL 0x9U -#define I2C1_TIMINGR_SDADEL 0x0U -#define I2C1_TIMINGR_SCLH 0x0cU -#define I2C1_TIMINGR_SCLL 0x22U - -# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended -# define RGB_MATRIX_FRAMEBUFFER_EFFECTS -# define RGB_MATRIX_KEYPRESSES -# define RGB_MATRIX_LED_PROCESS_LIMIT 4 -# define RGB_MATRIX_LED_FLUSH_LIMIT 26 - -// RGB Matrix Animation modes. Explicitly enabled -// For full list of effects, see: -// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects -# define ENABLE_RGB_MATRIX_ALPHAS_MODS -# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -# define ENABLE_RGB_MATRIX_BREATHING -# define ENABLE_RGB_MATRIX_BAND_SAT -# define ENABLE_RGB_MATRIX_BAND_VAL -# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL -# define ENABLE_RGB_MATRIX_CYCLE_ALL -# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL -# define ENABLE_RGB_MATRIX_DUAL_BEACON -# define ENABLE_RGB_MATRIX_RAINBOW_BEACON -# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS -# define ENABLE_RGB_MATRIX_RAINDROPS -# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -// # define ENABLE_RGB_MATRIX_HUE_BREATHING -// # define ENABLE_RGB_MATRIX_HUE_PENDULUM -// # define ENABLE_RGB_MATRIX_HUE_WAVE -# define ENABLE_RGB_MATRIX_PIXEL_RAIN -# define ENABLE_RGB_MATRIX_PIXEL_FLOW -# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL -// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined -# define ENABLE_RGB_MATRIX_TYPING_HEATMAP -# define ENABLE_RGB_MATRIX_DIGITAL_RAIN -// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define ENABLE_RGB_MATRIX_SPLASH -# define ENABLE_RGB_MATRIX_MULTISPLASH -# define ENABLE_RGB_MATRIX_SOLID_SPLASH -# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH - -// This allows VIA to control RGB Matrix settings in the 'Lighting' section. -#define VIA_QMK_RGBLIGHT_ENABLE - -#endif /* RGB_MATRIX_ENABLE */ |