diff options
Diffstat (limited to 'keyboards/durgod/dgk6x/config.h')
| -rw-r--r-- | keyboards/durgod/dgk6x/config.h | 93 |
1 files changed, 93 insertions, 0 deletions
diff --git a/keyboards/durgod/dgk6x/config.h b/keyboards/durgod/dgk6x/config.h new file mode 100644 index 0000000000..53f824b98e --- /dev/null +++ b/keyboards/durgod/dgk6x/config.h @@ -0,0 +1,93 @@ +/* Copyright 2021 Jessica Sullivan and Don Kjer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xD60D +#define MANUFACTURER Hoksi Technology + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +// Dynamic EEPROM +// Something sensible or else VIA may crash +// Users may enable more if they wish +#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 4095 + +// Increase VIA layer count +#define DYNAMIC_KEYMAP_LAYER_COUNT 16 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Bootmagic Lite key configuration */ +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 + +/* LED indicator pins */ +#define LED_CAPS_LOCK_PIN C4 +#define LED_WIN_LOCK_PIN C5 +#define LED_SCROLL_LOCK_PIN A8 +#define LED_MR_LOCK_PIN LED_SCROLL_LOCK_PIN +#define LED_PIN_ON_STATE 0 + +#ifdef RGB_MATRIX_ENABLE +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR1 represents A1:A0 of the 7-bit address. +// ADDR2 represents A3:A2 of the 7-bit address. +// The result is: 0b101(ADDR2)(ADDR1) + +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010011 + +#define DRIVER_COUNT 2 +#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) + +/* I2C Alternate function settings */ +#define I2C1_SCL_PAL_MODE 1 +#define I2C1_SDA_PAL_MODE 1 + +/* Set I2C speed to 400kHz, 300ns Tr, 14ns Tf */ +#define I2C1_TIMINGR_PRESC 0x1U +#define I2C1_TIMINGR_SCLDEL 0x9U +#define I2C1_TIMINGR_SDADEL 0x0U +#define I2C1_TIMINGR_SCLH 0x0cU +#define I2C1_TIMINGR_SCLL 0x22U + +# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +# define RGB_MATRIX_KEYPRESSES +# define RGB_MATRIX_LED_PROCESS_LIMIT 4 +# define RGB_MATRIX_LED_FLUSH_LIMIT 26 + +# define DISABLE_RGB_MATRIX_HUE_BREATHING +# define DISABLE_RGB_MATRIX_HUE_PENDULUM +# define DISABLE_RGB_MATRIX_HUE_WAVE + +// This allows VIA to control RGB Matrix settings in the 'Lighting' section. +#define VIA_QMK_RGBLIGHT_ENABLE + +#endif /* RGB_MATRIX_ENABLE */ |