diff options
Diffstat (limited to 'keyboards/durgod/dgk6x/config.h')
| -rw-r--r-- | keyboards/durgod/dgk6x/config.h | 133 |
1 files changed, 133 insertions, 0 deletions
diff --git a/keyboards/durgod/dgk6x/config.h b/keyboards/durgod/dgk6x/config.h new file mode 100644 index 0000000000..fe4ca58072 --- /dev/null +++ b/keyboards/durgod/dgk6x/config.h @@ -0,0 +1,133 @@ +/* Copyright 2021 Jessica Sullivan and Don Kjer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +#define WAIT_US_TIMER GPTD3 + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +// Dynamic EEPROM +// Something sensible or else VIA may crash +// Users may enable more if they wish +#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 4095 + +// Increase VIA layer count +#define DYNAMIC_KEYMAP_LAYER_COUNT 16 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Bootmagic Lite key configuration */ +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 + +/* LED indicator pins */ +#define LED_CAPS_LOCK_PIN C4 +#define LED_WIN_LOCK_PIN C5 +#define LED_SCROLL_LOCK_PIN A8 +#define LED_MR_LOCK_PIN LED_SCROLL_LOCK_PIN +#define LED_PIN_ON_STATE 0 + +#ifdef RGB_MATRIX_ENABLE +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR1 represents A1:A0 of the 7-bit address. +// ADDR2 represents A3:A2 of the 7-bit address. +// The result is: 0b101(ADDR2)(ADDR1) + +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010011 + +#define DRIVER_COUNT 2 +#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) + +/* I2C Alternate function settings */ +#define I2C1_SCL_PAL_MODE 1 +#define I2C1_SDA_PAL_MODE 1 + +/* Set I2C speed to 400kHz, 300ns Tr, 14ns Tf */ +#define I2C1_TIMINGR_PRESC 0x1U +#define I2C1_TIMINGR_SCLDEL 0x9U +#define I2C1_TIMINGR_SDADEL 0x0U +#define I2C1_TIMINGR_SCLH 0x0cU +#define I2C1_TIMINGR_SCLL 0x22U + +# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +# define RGB_MATRIX_KEYPRESSES +# define RGB_MATRIX_LED_PROCESS_LIMIT 4 +# define RGB_MATRIX_LED_FLUSH_LIMIT 26 + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// # define ENABLE_RGB_MATRIX_HUE_BREATHING +// # define ENABLE_RGB_MATRIX_HUE_PENDULUM +// # define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +#endif /* RGB_MATRIX_ENABLE */ |