diff options
Diffstat (limited to 'keyboards/delikeeb')
73 files changed, 4432 insertions, 0 deletions
diff --git a/keyboards/delikeeb/flatbread60/config.h b/keyboards/delikeeb/flatbread60/config.h new file mode 100644 index 0000000000..6c40d46bff --- /dev/null +++ b/keyboards/delikeeb/flatbread60/config.h @@ -0,0 +1,175 @@ +/* +Copyright 2020 noclew + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x9906 +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER delikeeb +#define PRODUCT Flatbread60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { F6, B1, B3, B2, B6 } +#define MATRIX_COL_PINS { F4, F5, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +#define RGB_DI_PIN F7 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 19 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS + +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/delikeeb/flatbread60/flatbread60.c b/keyboards/delikeeb/flatbread60/flatbread60.c new file mode 100644 index 0000000000..0cbc265530 --- /dev/null +++ b/keyboards/delikeeb/flatbread60/flatbread60.c @@ -0,0 +1,18 @@ +/* Copyright 2020 noclew + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "flatbread60.h" + diff --git a/keyboards/delikeeb/flatbread60/flatbread60.h b/keyboards/delikeeb/flatbread60/flatbread60.h new file mode 100644 index 0000000000..3fb8d7a6f1 --- /dev/null +++ b/keyboards/delikeeb/flatbread60/flatbread60.h @@ -0,0 +1,42 @@ +/* Copyright 2020 noclew + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_ortho_5x12( \ + k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, \ + k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, \ + k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, k36, \ + k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, k48, \ + k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 \ +) \ +{ \ + { k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12 }, \ + { k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24 }, \ + { k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, k36 }, \ + { k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, k48 }, \ + { k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 } \ +} diff --git a/keyboards/delikeeb/flatbread60/info.json b/keyboards/delikeeb/flatbread60/info.json new file mode 100644 index 0000000000..ed621e8175 --- /dev/null +++ b/keyboards/delikeeb/flatbread60/info.json @@ -0,0 +1,253 @@ +{ + "keyboard_name": "flatbread60", + "url": "", + "maintainer": "noclew", + "width": 12, + "height": 5, + "layouts": { + "LAYOUT_ortho_5x12": { + "layout": [ + { + "x": 0, + "y": 0 + }, + { + "x": 1, + "y": 0 + }, + { + "x": 2, + "y": 0 + }, + { + "x": 3, + "y": 0 + }, + { + "x": 4, + "y": 0 + }, + { + "x": 5, + "y": 0 + }, + { + "x": 6, + "y": 0 + }, + { + "x": 7, + "y": 0 + }, + { + "x": 8, + "y": 0 + }, + { + "x": 9, + "y": 0 + }, + { + "x": 10, + "y": 0 + }, + { + "x": 11, + "y": 0 + }, + { + "x": 0, + "y": 1 + }, + { + "x": 1, + "y": 1 + }, + { + "x": 2, + "y": 1 + }, + { + "x": 3, + "y": 1 + }, + { + "x": 4, + "y": 1 + }, + { + "x": 5, + "y": 1 + }, + { + "x": 6, + "y": 1 + }, + { + "x": 7, + "y": 1 + }, + { + "x": 8, + "y": 1 + }, + { + "x": 9, + "y": 1 + }, + { + "x": 10, + "y": 1 + }, + { + "x": 11, + "y": 1 + }, + { + "x": 0, + "y": 2 + }, + { + "x": 1, + "y": 2 + }, + { + "x": 2, + "y": 2 + }, + { + "x": 3, + "y": 2 + }, + { + "x": 4, + "y": 2 + }, + { + "x": 5, + "y": 2 + }, + { + "x": 6, + "y": 2 + }, + { + "x": 7, + "y": 2 + }, + { + "x": 8, + "y": 2 + }, + { + "x": 9, + "y": 2 + }, + { + "x": 10, + "y": 2 + }, + { + "x": 11, + "y": 2 + }, + { + "x": 0, + "y": 3 + }, + { + "x": 1, + "y": 3 + }, + { + "x": 2, + "y": 3 + }, + { + "x": 3, + "y": 3 + }, + { + "x": 4, + "y": 3 + }, + { + "x": 5, + "y": 3 + }, + { + "x": 6, + "y": 3 + }, + { + "x": 7, + "y": 3 + }, + { + "x": 8, + "y": 3 |