diff options
Diffstat (limited to 'keyboards/delikeeb')
75 files changed, 0 insertions, 4208 deletions
diff --git a/keyboards/delikeeb/flatbread60/config.h b/keyboards/delikeeb/flatbread60/config.h deleted file mode 100644 index 772ed61faf..0000000000 --- a/keyboards/delikeeb/flatbread60/config.h +++ /dev/null @@ -1,110 +0,0 @@ -/* -Copyright 2020 noclew - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 12 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { F6, B1, B3, B2, B6 } -#define MATRIX_COL_PINS { F4, F5, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -#define RGB_DI_PIN F7 -#ifdef RGB_DI_PIN - #define RGBLED_NUM 19 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== all animations enable ==*/ - #define RGBLIGHT_ANIMATIONS - -#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT diff --git a/keyboards/delikeeb/flatbread60/flatbread60.c b/keyboards/delikeeb/flatbread60/flatbread60.c deleted file mode 100644 index 0cbc265530..0000000000 --- a/keyboards/delikeeb/flatbread60/flatbread60.c +++ /dev/null @@ -1,18 +0,0 @@ -/* Copyright 2020 noclew - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "flatbread60.h" - diff --git a/keyboards/delikeeb/flatbread60/flatbread60.h b/keyboards/delikeeb/flatbread60/flatbread60.h deleted file mode 100644 index 3fb8d7a6f1..0000000000 --- a/keyboards/delikeeb/flatbread60/flatbread60.h +++ /dev/null @@ -1,42 +0,0 @@ -/* Copyright 2020 noclew - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -/* This is a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT_ortho_5x12( \ - k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, \ - k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, \ - k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, k36, \ - k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, k48, \ - k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 \ -) \ -{ \ - { k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12 }, \ - { k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24 }, \ - { k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, k36 }, \ - { k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, k48 }, \ - { k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 } \ -} diff --git a/keyboards/delikeeb/flatbread60/info.json b/keyboards/delikeeb/flatbread60/info.json deleted file mode 100644 index 0bb06feb9c..0000000000 --- a/keyboards/delikeeb/flatbread60/info.json +++ /dev/null @@ -1,257 +0,0 @@ -{ - "keyboard_name": "Flatbread60", - "manufacturer": "delikeeb", - "url": "", - "maintainer": "noclew", - "usb": { - "vid": "0x9906", - "pid": "0x0000", - "device_version": "0.0.1" - }, - "layouts": { - "LAYOUT_ortho_5x12": { - "layout": [ - { - "x": 0, - "y": 0 - }, - { - "x": 1, - "y": 0 - }, - { - "x": 2, - "y": 0 - }, - { - "x": 3, - "y": 0 - }, - { - "x": 4, - "y": 0 - }, - { - "x": 5, - "y": 0 - }, - { - "x": 6, - "y": 0 - }, - { - "x": 7, - "y": 0 - }, - { - "x": 8, - "y": 0 - }, - { - "x": 9, - "y": 0 - }, - { - "x": 10, - "y": 0 - }, - { - "x": 11, - "y": 0 - }, - { - "x": 0, - "y": 1 - }, - { - "x": 1, - "y": 1 - }, - { - "x": 2, - "y": 1 - }, - { - "x": 3, - "y": 1 - }, - { - "x": 4, - "y": 1 - }, - { - "x": 5, - "y": 1 - }, - { - "x": 6, - "y": 1 - }, - { - "x": 7, - "y": 1 - }, - { - "x": 8, - "y": 1 - }, - { - "x": 9, - "y": 1 - }, - { - "x": 10, - "y": 1 - }, - { - "x": 11, - "y": 1 - }, - { - "x": 0, - "y": 2 - }, - { - "x": 1, - "y": 2 - }, - { - "x": 2, - "y": 2 - }, - { - "x": 3, - "y": 2 - }, - { - "x": 4, - "y": 2 - }, - { - "x": 5, - "y": 2 - }, - { - "x": 6, - "y": 2 - }, - { - "x": 7, - "y": 2 - }, - { - "x": 8, - "y": 2 - }, - { - "x": 9, - "y": 2 - }, - { - "x": 10, - "y": 2 - }, - { - "x": 11, - "y": 2 - }, - { - "x": 0, - "y": 3 - }, - { - "x": 1, - "y": 3 - }, - { - "x": 2, - "y": 3 - }, - { - "x": 3, - "y": 3 - }, - { - "x": 4, - "y": 3 - }, - { - "x": 5, - "y": 3 - }, - { - "x": 6, - "y": 3 - }, - { - "x": 7, - "y": 3 - }, - { - "x": 8, - "y": 3 - }, - { - "x": 9, - "y": 3 - }, - { - "x": 10, - "y": 3 - }, - { - "x": 11, - "y": 3 - }, - { - "x": 0, - "y": 4 - }, - { - "x": 1, - "y": 4 - }, - { - "x": 2, - "y": 4 - }, - { - "x": 3, - "y": 4 - }, - { - "x": 4, - "y": 4 - }, |