7 files changed, 0 insertions, 197 deletions
diff --git a/keyboards/delikeeb/vaneela/config.h b/keyboards/delikeeb/vaneela/config.h
deleted file mode 100644
index 43d8a9041b..0000000000
--- a/keyboards/delikeeb/vaneela/config.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
-Copyright 2020 noclew
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 12
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F6, F7, B3, B2, B6 }
-#define MATRIX_COL_PINS { F4, F5, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/delikeeb/vaneela/keymaps/default/readme.md b/keyboards/delikeeb/vaneela/keymaps/default/readme.md
deleted file mode 100644
index 597cee4faf..0000000000
--- a/keyboards/delikeeb/vaneela/keymaps/default/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for vaneela
diff --git a/keyboards/delikeeb/vaneela/keymaps/via/rules.mk b/keyboards/delikeeb/vaneela/keymaps/via/rules.mk
deleted file mode 100644
index 1e5b99807c..0000000000
--- a/keyboards/delikeeb/vaneela/keymaps/via/rules.mk
+++ /dev/null
@@ -1 +0,0 @@
-VIA_ENABLE = yes
diff --git a/keyboards/delikeeb/vaneela/readme.md b/keyboards/delikeeb/vaneela/readme.md
deleted file mode 100644
index 0e8f894690..0000000000
--- a/keyboards/delikeeb/vaneela/readme.md
+++ /dev/null
@@ -1,19 +0,0 @@
-# Vaneela
-
-![vaneela](https://i.imgur.com/wp64G8vl.jpg)
-
-This is a semi-staggered 5x12 keyboard made by a hobbist. Vaneela runs on Pro Micro and its compatible variants, such as elite-C. In matrix wise, it has the same key layout as other 5 x 12 ortholinear boards. 
-
-* Keyboard Maintainer: [noclew](https://github.com/noclew)
-* Hardware Supported: Vaneela
-* Hardware Availability: Not commercially available, but the board fabricaion file will be uploaded in the near future.
-
-Make example for this keyboard (after setting up your build environment):
-
-    make delikeeb/vaneela:default
-
-Flashing example for this keyboard:
-    
-    make delikeeb/vaneela:default:flash
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/delikeeb/vaneela/rules.mk b/keyboards/delikeeb/vaneela/rules.mk
deleted file mode 100644
index 515ca5621f..0000000000
--- a/keyboards/delikeeb/vaneela/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
diff --git a/keyboards/delikeeb/vaneela/vaneela.c b/keyboards/delikeeb/vaneela/vaneela.c
deleted file mode 100644
index ca5d513a00..0000000000
--- a/keyboards/delikeeb/vaneela/vaneela.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/* Copyright 2020 noclew
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "vaneela.h"
-
diff --git a/keyboards/delikeeb/vaneela/vaneela.h b/keyboards/delikeeb/vaneela/vaneela.h
deleted file mode 100644
index 3fb8d7a6f1..0000000000
--- a/keyboards/delikeeb/vaneela/vaneela.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* Copyright 2020 noclew
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-/* This is a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT_ortho_5x12( \
-    k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, \
-    k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, \
-    k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, k36, \
-    k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, k48, \
-    k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 \
-) \
-{ \
-    { k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12 }, \
-    { k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24 }, \
-    { k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, k36 }, \
-    { k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, k48 }, \
-    { k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 } \
-}