7 files changed, 12 insertions, 12 deletions
diff --git a/keyboards/crkbd/keymaps/davidrambo/config.h b/keyboards/crkbd/keymaps/davidrambo/config.h
index 9fb4348802..15ed448cae 100644
--- a/keyboards/crkbd/keymaps/davidrambo/config.h
+++ b/keyboards/crkbd/keymaps/davidrambo/config.h
@@ -34,7 +34,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PERMISSIVE_HOLD
 
 #ifdef RGB_MATRIX_ENABLE
-    #define RGB_MATRIX_STARTUP_HUE 231
+    #define RGB_MATRIX_DEFAULT_HUE 231
     #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
     #define RGB_MATRIX_TYPING_MEATMAP_DECREASE_DELAY_MS 50
     // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
diff --git a/keyboards/crkbd/keymaps/devdev/config.h b/keyboards/crkbd/keymaps/devdev/config.h
index 0fe7e90385..14067d1e74 100644
--- a/keyboards/crkbd/keymaps/devdev/config.h
+++ b/keyboards/crkbd/keymaps/devdev/config.h
@@ -75,7 +75,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT
 
 #    define RGB_MATRIX_HUE_STEP 8
 #    define RGB_MATRIX_SAT_STEP 8
diff --git a/keyboards/crkbd/keymaps/dsanchezseco/config.h b/keyboards/crkbd/keymaps/dsanchezseco/config.h
index 4fd8fc94c4..229e26e010 100644
--- a/keyboards/crkbd/keymaps/dsanchezseco/config.h
+++ b/keyboards/crkbd/keymaps/dsanchezseco/config.h
@@ -28,7 +28,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // lower maximum brightness to lower power usage and prevent unresponsiveness
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT
 
 // RGB Matrix Animation modes. Explicitly enabled
 // For full list of effects, see:
diff --git a/keyboards/crkbd/keymaps/gotham/config.h b/keyboards/crkbd/keymaps/gotham/config.h
index f7144fb008..3f56ef92a5 100644
--- a/keyboards/crkbd/keymaps/gotham/config.h
+++ b/keyboards/crkbd/keymaps/gotham/config.h
@@ -49,7 +49,7 @@
 #    define RGB_MATRIX_SAT_STEP 64
 #    define RGB_MATRIX_VAL_STEP 64
 #    define RGB_MATRIX_SPD_STEP 20
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
 
 /* Disable the animations you don't want/need.  You will need to disable a good number of these    *
  * because they take up a lot of space.  Disable until you can successfully compile your firmware. */
diff --git a/keyboards/crkbd/keymaps/jpe230/config.h b/keyboards/crkbd/keymaps/jpe230/config.h
index 57a0271e27..815cb90706 100644
--- a/keyboards/crkbd/keymaps/jpe230/config.h
+++ b/keyboards/crkbd/keymaps/jpe230/config.h
@@ -30,9 +30,9 @@
 #define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define RGB_DISABLE_TIMEOUT CUSTOM_OLED_TIMEOUT
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 128
-#define RGB_MATRIX_STARTUP_HUE 215
-#define RGB_MATRIX_STARTUP_SAT 255
-#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#define RGB_MATRIX_DEFAULT_HUE 215
+#define RGB_MATRIX_DEFAULT_SAT 255
+#define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 
 /* ---------------------------
  * Common other Configuration
diff --git a/keyboards/crkbd/keymaps/rmeli/config.h b/keyboards/crkbd/keymaps/rmeli/config.h
index 2f06b82cc1..86104fbacb 100644
--- a/keyboards/crkbd/keymaps/rmeli/config.h
+++ b/keyboards/crkbd/keymaps/rmeli/config.h
@@ -54,10 +54,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define ENABLE_RGB_MATRIX_SOLID_COLOR
 #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
 // Default effect
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
-#    define RGB_MATRIX_STARTUP_HUE 10
-#    define RGB_MATRIX_STARTUP_SAT 255
-#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
+#    define RGB_MATRIX_DEFAULT_HUE 10
+#    define RGB_MATRIX_DEFAULT_SAT 255
+#    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #endif
 
 // https://github.com/qmk/qmk_firmware/blob/develop/docs/squeezing_avr.md
diff --git a/keyboards/crkbd/keymaps/thunderbird2086/config.h b/keyboards/crkbd/keymaps/thunderbird2086/config.h
index 36afd9b469..41e5c3ff43 100644
--- a/keyboards/crkbd/keymaps/thunderbird2086/config.h
+++ b/keyboards/crkbd/keymaps/thunderbird2086/config.h
@@ -52,7 +52,7 @@
 #    define RGB_MATRIX_SAT_STEP 64
 #    define RGB_MATRIX_VAL_STEP 64
 #    define RGB_MATRIX_SPD_STEP 20
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
 
 /* Disable the animations you don't want/need.  You will need to disable a good number of these    *
  * because they take up a lot of space.  Disable until you can successfully compile your firmware. */