diff options
Diffstat (limited to 'keyboards/crkbd/keymaps/vlukash_trackpad_left')
4 files changed, 273 insertions, 0 deletions
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h b/keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h new file mode 100644 index 0000000000..bdd1a099ae --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h @@ -0,0 +1,21 @@ +#pragma once + +/* Select hand configuration */ + +#define MASTER_RIGHT +// #define EE_HANDS + +#define SSD1306OLED + +#define USE_SERIAL_PD2 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c b/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c new file mode 100644 index 0000000000..48f60419fb --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c @@ -0,0 +1,227 @@ +#include QMK_KEYBOARD_H +#include "bootloader.h" +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +enum layer_names { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + RGBRST, + MBTN1, + SCRL +}; + +#define KC______ KC_TRNS +#define KC_XXXXX KC_NO +#define KC_LOWER LOWER +#define KC_RAISE RAISE +#define KC_RST RESET +#define KC_LRST RGBRST +#define KC_LTOG RGB_TOG +#define KC_LHUI RGB_HUI +#define KC_LHUD RGB_HUD +#define KC_LSAI RGB_SAI +#define KC_LSAD RGB_SAD +#define KC_LVAI RGB_VAI +#define KC_LVAD RGB_VAD +#define KC_LMOD RGB_MOD + +#define KC_CTLA CTL_T(KC_A) +#define KC_CTLSC CTL_T(KC_SCLN) +#define KC_SFTZ SFT_T(KC_Z) +#define KC_SFTSL SFT_T(KC_SLSH) +#define KC_WINX LWIN_T(KC_X) +#define KC_WINDO RWIN_T(KC_DOT) + +#define KC_MBTN1 MBTN1 +#define KC_SCRL SCRL + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + TAB, CTLA, S, D, F, G, H, J, K, L, CTLSC, QUOT, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + GRAVE, SFTZ, WINX, C, V, B, N, M, COMM, WINDO, SFTSL,BSLASH, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ), + + [_LOWER] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, XXXXX, PGDN, PSCR, PGUP, LBRC, RBRC, 7, 8, 9, XXXXX, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LCTRL, PLUS, MINS, EQL, LPRN, RPRN, 4, 5, 6, RCTRL, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LSFT, HOME, XXXXX, END, LCBR, RCBR, 1, 2, 3, RSFT, XXXXX, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, 0 + //`--------------------' `--------------------' + ), + + [_RAISE] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, XXXXX, F7, F8, F9, F10, BTN2, BTN2, MNXT, MPRV, MPLY, MSTP, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LCTRL, F4, F5, F6, F11, LEFT, DOWN, UP, RIGHT, RCTRL, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LSFT, F1, F2, F3, F12, XXXXX, XXXXX, VOLU, VOLD, MUTE, RSFT, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ), + + [_ADJUST] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, RST, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ) +}; + +int RGB_current_mode; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +const char *read_keylog(void); +const char *read_keylogs(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + // If you want to change the display of OLED, you need to change here + matrix_write_ln(matrix, read_layer_state()); + matrix_write_ln(matrix, read_keylog()); + matrix_write_ln(matrix, read_keylogs()); + } else { + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef SSD1306OLED + set_keylog(keycode, record); +#endif + } + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + #endif + return false; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} + diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/readme.md b/keyboards/crkbd/keymaps/vlukash_trackpad_left/readme.md new file mode 100644 index 0000000000..91b884749f --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/readme.md @@ -0,0 +1,14 @@ +# CrKbd with the Trackpad support + +CrKbd version that supports BlackBerry 8520 trackpad via additional PCB. +See this repository for more details: + - https://github.com/vlukash/corne-trackpad + - https://vlukash.com/2019/01/15/trackpad-in-keycap-corne-crkbd-keyboard + +This firmware is for the Left keyboard. + +# Build + +``` +make crkbd:vlukash_trackpad_left:dfu +``` diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk b/keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk new file mode 100644 index 0000000000..46be73c475 --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk @@ -0,0 +1,11 @@ +# Build Options +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. + +BOOTLOADER = atmel-dfu + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/glcdfont.c \ + ./lib/rgb_state_reader.c \ + ./lib/layer_state_reader.c \ + ./lib/logo_reader.c \ + ./lib/keylogger.c \ |