diff options
Diffstat (limited to 'keyboards/crkbd/keymaps/hvp/keymap.c')
| -rw-r--r-- | keyboards/crkbd/keymaps/hvp/keymap.c | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/keyboards/crkbd/keymaps/hvp/keymap.c b/keyboards/crkbd/keymaps/hvp/keymap.c new file mode 100644 index 0000000000..b66c360e18 --- /dev/null +++ b/keyboards/crkbd/keymaps/hvp/keymap.c @@ -0,0 +1,183 @@ +#include QMK_KEYBOARD_H +#include "hvp.c" + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 3 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT( \ + //,-----------------------------------------. ,-----------------------------------------. + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_BSPC,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LT(_ADJUST, KC_ESC), KC_A, KC_S, KC_D, LT(_RAISE,KC_F), MT(MOD_LCTL,KC_G), KC_H, KC_J, KC_K, KC_L,TD(TD1),TD(TD2),\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM,KC_DOT,TD(TD3),KC_SFTENT,\ + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC), LT(_RAISE,KC_ENT), RAISE,KC_LALT \ + //`--------------------' `--------------------' + ), + + [_RAISE] = LAYOUT( \ + //,-----------------------------------------. ,-----------------------------------------. + KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_BSPC,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT,KC_NO, KC_DEL,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_NO, KC_NO,\ + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC), LT(_RAISE,KC_ENT), RAISE,KC_LALT \ + //`--------------------' `--------------------' + ), + + [_LOWER] = LAYOUT( \ + //,-----------------------------------------. ,-----------------------------------------. + KC_TAB,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MINS,KC_EQL,KC_LCBR,KC_RCBR,KC_PIPE,KC_GRV,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UNDS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS,KC_TILD,\ + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC), LT(_RAISE,KC_ENT), RAISE,KC_LALT \ + //`--------------------' `--------------------' + ), + + [_ADJUST] = LAYOUT( \ + //,-----------------------------------------. ,-----------------------------------------. + KC_F1,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + RESET,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_MPLY, KC_MNXT, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,\ + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC), LT(_RAISE,KC_ENT), RAISE,KC_LALT \ + //`--------------------' `--------------------' + ) +}; + +int RGB_current_mode; + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +const char *read_keylog(void); +const char *read_keylogs(void); + +// const char *read_mode_icon(bool swap); +// const char *read_host_led_state(void); +// void set_timelog(void); +// const char *read_timelog(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + // If you want to change the display of OLED, you need to change here + matrix_write_ln(matrix, read_layer_state()); + matrix_write_ln(matrix, read_keylog()); + //matrix_write_ln(matrix, read_keylogs()); + //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); + //matrix_write_ln(matrix, read_host_led_state()); + //matrix_write_ln(matrix, read_timelog()); + } else { + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef SSD1306OLED + set_keylog(keycode, record); +#endif + // set_timelog(); + } + + switch (keycode) { + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +}
\ No newline at end of file |