5 files changed, 15 insertions, 18 deletions
diff --git a/keyboards/converter/converter.c b/keyboards/converter/converter.c
deleted file mode 100644
index aa4bef63a9..0000000000
--- a/keyboards/converter/converter.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "converter.h"
-\ No newline at end of file
diff --git a/keyboards/converter/converter.h b/keyboards/converter/converter.h
deleted file mode 100644
index 7a4a4835e6..0000000000
--- a/keyboards/converter/converter.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "quantum.h"
-\ No newline at end of file
diff --git a/keyboards/converter/rules.mk b/keyboards/converter/rules.mk
deleted file mode 100644
index e69de29bb2..0000000000
--- a/keyboards/converter/rules.mk
+++ /dev/null
diff --git a/keyboards/converter/usb_usb/README.md b/keyboards/converter/usb_usb/README.md
index c1904a8122..2ed702695b 100644
--- a/keyboards/converter/usb_usb/README.md
+++ b/keyboards/converter/usb_usb/README.md
@@ -9,7 +9,7 @@ Hardware Availability: [GH thread](https://geekhack.org/index.php?topic=72052.0)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make converter-usb_usb-default
+    make converter/usb_usb:default
 
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
 
diff --git a/keyboards/converter/usb_usb/rules.mk b/keyboards/converter/usb_usb/rules.mk
index 4ee6cdb1ce..81a393e8ab 100644
--- a/keyboards/converter/usb_usb/rules.mk
+++ b/keyboards/converter/usb_usb/rules.mk
@@ -1,5 +1,5 @@
 # MCU name
-MCU ?= atmega32u4
+MCU = atmega32u4
 
 
 # Processor frequency.
@@ -13,14 +13,14 @@ MCU ?= atmega32u4
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
-F_CPU ?= 8000000
+F_CPU = 8000000
 
 
 #
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
-ARCH ?= AVR8
+ARCH = AVR8
 
 # Input clock frequency.
 #     This will define a symbol, F_USB, in all source code files equal to the
@@ -33,7 +33,7 @@ ARCH ?= AVR8
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB ?= $(F_CPU)
+F_USB = $(F_CPU)
 
 # Interrupt driven control endpoint task
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
@@ -51,16 +51,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-# BOOTMAGIC_ENABLE	?= yes	# Virtual DIP switch configuration(+1000)
-# MOUSEKEY_ENABLE		?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE		?= yes	# Audio control and System control(+450)
-# CONSOLE_ENABLE		?= yes	# Console for debug(+400)
-# COMMAND_ENABLE		?= yes  # Commands for debug and configuration
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes	# USB Nkey Rollover - not yet supported in LUFA
-# BACKLIGHT_ENABLE ?= yes
-
+# BOOTMAGIC_ENABLE	= yes	# Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE		= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE		= yes	# Audio control and System control(+450)
+# CONSOLE_ENABLE		= yes	# Console for debug(+400)
+# COMMAND_ENABLE		= yes  # Commands for debug and configuration
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+# BACKLIGHT_ENABLE = yes
+USB_HID_ENABLE = yes
 
 CUSTOM_MATRIX = yes
-SRC = custom_matrix.cpp
-include $(TMK_DIR)/protocol/usb_hid.mk
+SRC = custom_matrix.cpp
+\ No newline at end of file