1 files changed, 81 insertions, 0 deletions
diff --git a/keyboards/converter/m0110_usb/m0110.h b/keyboards/converter/m0110_usb/m0110.h
new file mode 100644
index 0000000000..63ff3e90ec
--- /dev/null
+++ b/keyboards/converter/m0110_usb/m0110.h
@@ -0,0 +1,81 @@
+/*
+Copyright 2011,2012 Jun WAKO <wakojun@gmail.com>
+
+This software is licensed with a Modified BSD License.
+All of this is supposed to be Free Software, Open Source, DFSG-free,
+GPL-compatible, and OK to use in both free and proprietary applications.
+Additions and corrections to this file are welcome.
+
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright
+  notice, this list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright
+  notice, this list of conditions and the following disclaimer in
+  the documentation and/or other materials provided with the
+  distribution.
+
+* Neither the name of the copyright holders nor the names of
+  contributors may be used to endorse or promote products derived
+  from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#pragma once
+
+/* port settings for clock and data line */
+#if !(defined(M0110_CLOCK_PORT) && defined(M0110_CLOCK_PIN) && defined(M0110_CLOCK_DDR) && defined(M0110_CLOCK_BIT))
+#    error "M0110 clock port setting is required in config.h"
+#endif
+
+#if !(defined(M0110_DATA_PORT) && defined(M0110_DATA_PIN) && defined(M0110_DATA_DDR) && defined(M0110_DATA_BIT))
+#    error "M0110 data port setting is required in config.h"
+#endif
+
+/* Commands */
+#define M0110_INQUIRY 0x10
+#define M0110_INSTANT 0x14
+#define M0110_MODEL 0x16
+#define M0110_TEST 0x36
+
+/* Response(raw byte from M0110) */
+#define M0110_NULL 0x7B
+#define M0110_KEYPAD 0x79
+#define M0110_TEST_ACK 0x7D
+#define M0110_TEST_NAK 0x77
+#define M0110_SHIFT 0x71
+#define M0110_ARROW_UP 0x1B
+#define M0110_ARROW_DOWN 0x11
+#define M0110_ARROW_LEFT 0x0D
+#define M0110_ARROW_RIGHT 0x05
+
+/* This inidcates no response. */
+#define M0110_ERROR 0xFF
+
+/* scan code offset for keypad and arrow keys */
+#define M0110_KEYPAD_OFFSET 0x40
+#define M0110_CALC_OFFSET 0x60
+
+extern uint8_t m0110_error;
+
+/* host role */
+void    m0110_init(void);
+uint8_t m0110_send(uint8_t data);
+uint8_t m0110_recv(void);
+uint8_t m0110_recv_key(void);
+uint8_t m0110_inquiry(void);
+uint8_t m0110_instant(void);