diff options
Diffstat (limited to 'keyboards/converter/ibm_terminal/config.h')
| -rw-r--r-- | keyboards/converter/ibm_terminal/config.h | 105 |
1 files changed, 0 insertions, 105 deletions
diff --git a/keyboards/converter/ibm_terminal/config.h b/keyboards/converter/ibm_terminal/config.h deleted file mode 100644 index b3593e8ab4..0000000000 --- a/keyboards/converter/ibm_terminal/config.h +++ /dev/null @@ -1,105 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2016 Priyadi Iman Nurcahyo <priyadi@priyadi.net> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -/* matrix size */ -#define MATRIX_ROWS 17 // keycode bit: 3-0 -#define MATRIX_COLS 8 // keycode bit: 6-4 - - -/* legacy keymap support */ -#define USE_LEGACY_KEYMAP - - -/* key combination for command */ -#define IS_COMMAND() ( \ - get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT) | MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL)) \ -) - - -/* - * PS/2 USART configuration for ATMega32U4 - */ -#ifdef PS2_DRIVER_USART -/* XCK for clock line */ -#define PS2_CLOCK_PIN D5 -#define PS2_DATA_PIN D2 - -/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ -/* set DDR of CLOCK as input to be slave */ -#define PS2_USART_INIT() do { \ - PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ - PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ - UCSR1C = ((1 << UMSEL10) | \ - (3 << UPM10) | \ - (0 << USBS1) | \ - (3 << UCSZ10) | \ - (0 << UCPOL1)); \ - UCSR1A = 0; \ - UBRR1H = 0; \ - UBRR1L = 0; \ -} while (0) -#define PS2_USART_RX_INT_ON() do { \ - UCSR1B = ((1 << RXCIE1) | \ - (1 << RXEN1)); \ -} while (0) -#define PS2_USART_RX_POLL_ON() do { \ - UCSR1B = (1 << RXEN1); \ -} while (0) -#define PS2_USART_OFF() do { \ - UCSR1C = 0; \ - UCSR1B &= ~((1 << RXEN1) | \ - (1 << TXEN1)); \ -} while (0) -#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) -#define PS2_USART_RX_DATA UDR1 -#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) -#define PS2_USART_RX_VECT USART1_RX_vect -#endif - - -/* - * PS/2 Interrupt configuration - */ -#ifdef PS2_DRIVER_INTERRUPT -/* uses INT1 for clock line(ATMega32U4) */ -#define PS2_CLOCK_PIN D1 -#define PS2_DATA_PIN D0 - -#define PS2_INT_INIT() do { \ - EICRA |= ((1<<ISC11) | \ - (0<<ISC10)); \ -} while (0) -#define PS2_INT_ON() do { \ - EIMSK |= (1<<INT1); \ -} while (0) -#define PS2_INT_OFF() do { \ - EIMSK &= ~(1<<INT1); \ -} while (0) -#define PS2_INT_VECT INT1_vect -#endif - - -/* - * PS/2 Busywait configuration - */ -#ifdef PS2_DRIVER_BUSYWAIT -#define PS2_CLOCK_PIN D1 -#define PS2_DATA_PIN D0 -#endif |