summaryrefslogtreecommitdiffstats
path: root/keyboards/converter/adb_usb
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/converter/adb_usb')
-rw-r--r--keyboards/converter/adb_usb/adb.c531
-rw-r--r--keyboards/converter/adb_usb/adb.h106
-rw-r--r--keyboards/converter/adb_usb/adb_usb.h95
-rw-r--r--keyboards/converter/adb_usb/matrix.c8
-rw-r--r--keyboards/converter/adb_usb/rules.mk4
5 files changed, 695 insertions, 49 deletions
diff --git a/keyboards/converter/adb_usb/adb.c b/keyboards/converter/adb_usb/adb.c
new file mode 100644
index 0000000000..28f14c9fe8
--- /dev/null
+++ b/keyboards/converter/adb_usb/adb.c
@@ -0,0 +1,531 @@
+/*
+Copyright 2011-19 Jun WAKO <wakojun@gmail.com>
+Copyright 2013 Shay Green <gblargg@gmail.com>
+
+This software is licensed with a Modified BSD License.
+All of this is supposed to be Free Software, Open Source, DFSG-free,
+GPL-compatible, and OK to use in both free and proprietary applications.
+Additions and corrections to this file are welcome.
+
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+* Neither the name of the copyright holders nor the names of
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#include <stdbool.h>
+#include <util/delay.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include "adb.h"
+#include "print.h"
+
+// GCC doesn't inline functions normally
+#define data_lo() (ADB_DDR |= (1 << ADB_DATA_BIT))
+#define data_hi() (ADB_DDR &= ~(1 << ADB_DATA_BIT))
+#define data_in() (ADB_PIN & (1 << ADB_DATA_BIT))
+
+#ifdef ADB_PSW_BIT
+static inline void psw_lo(void);
+static inline void psw_hi(void);
+static inline bool psw_in(void);
+#endif
+
+static inline void attention(void);
+static inline void place_bit0(void);
+static inline void place_bit1(void);
+static inline void send_byte(uint8_t data);
+static inline uint16_t wait_data_lo(uint16_t us);
+static inline uint16_t wait_data_hi(uint16_t us);
+
+void adb_host_init(void) {
+ ADB_PORT &= ~(1 << ADB_DATA_BIT);
+ data_hi();
+#ifdef ADB_PSW_BIT
+ psw_hi();
+#endif
+}
+
+#ifdef ADB_PSW_BIT
+bool adb_host_psw(void) { return psw_in(); }
+#endif
+
+/*
+ * Don't call this in a row without the delay, otherwise it makes some of poor controllers
+ * overloaded and misses strokes. Recommended interval is 12ms.
+ *
+ * Thanks a lot, blargg!
+ * <http://geekhack.org/index.php?topic=14290.msg1068919#msg1068919>
+ * <http://geekhack.org/index.php?topic=14290.msg1070139#msg1070139>
+ */
+uint16_t adb_host_kbd_recv(void) { return adb_host_talk(ADB_ADDR_KEYBOARD, ADB_REG_0); }
+
+#ifdef ADB_MOUSE_ENABLE
+uint16_t adb_host_mouse_recv(void) { return adb_host_talk(ADB_ADDR_MOUSE, ADB_REG_0); }
+#endif
+
+// This sends Talk command to read data from register and returns length of the data.
+uint8_t adb_host_talk_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) {
+ for (int8_t i = 0; i < len; i++) buf[i] = 0;
+
+ cli();
+ attention();
+ send_byte((addr << 4) | ADB_CMD_TALK | reg);
+ place_bit0(); // Stopbit(0)
+ // TODO: Service Request(Srq):
+ // Device holds low part of comannd stopbit for 140-260us
+ //
+ // Command:
+ // ......._ ______________________ ___ ............_ -------
+ // | | | | | | |
+ // Command | | | | | Data bytes | |
+ // ........|___| | 140-260 |__| |_............|___|
+ // |stop0 | Tlt Stop-to-Start |start1| |stop0 |
+ //
+ // Command without data:
+ // ......._ __________________________
+ // | |
+ // Command | |
+ // ........|___| | 140-260 |
+ // |stop0 | Tlt Stop-to-Start |
+ //
+ // Service Request:
+ // ......._ ______ ___ ............_ -------
+ // | 140-260 | | | | | |
+ // Command | Service Request | | | | Data bytes | |
+ // ........|___________________| |__| |_............|___|
+ // |stop0 | |start1| |stop0 |
+ // ......._ __________
+ // | 140-260 |
+ // Command | Service Request |
+ // ........|___________________|
+ // |stop0 |
+ // This can be happened?
+ // ......._ ______________________ ___ ............_ -----
+ // | | | | | | 140-260 |
+ // Command | | | | | Data bytes | Service Request |
+ // ........|___| | 140-260 |__| |_............|_________________|
+ // |stop0 | Tlt Stop-to-Start |start1| |stop0 |
+ //
+ // "Service requests are issued by the devices during a very specific time at the
+ // end of the reception of the command packet.
+ // If a device in need of service issues a service request, it must do so within
+ // the 65 µs of the Stop Bit’s low time and maintain the line low for a total of 300 µs."
+ //
+ // "A device sends a Service Request signal by holding the bus low during the low
+ // portion of the stop bit of any command or data transaction. The device must lengthen
+ // the stop by a minimum of 140 J.lS beyond its normal duration, as shown in Figure 8-15."
+ // http://ww1.microchip.com/downloads/en/AppNotes/00591b.pdf
+ if (!wait_data_hi(500)) { // Service Request(310us Adjustable Keyboard): just ignored
+ xprintf("R");
+ sei();
+ return 0;
+ }
+ if (!wait_data_lo(500)) { // Tlt/Stop to Start(140-260us)
+ sei();
+ return 0; // No data from device(not error);
+ }
+
+ // start bit(1)
+ if (!wait_data_hi(40)) {
+ xprintf("S");
+ sei();
+ return 0;
+ }
+ if (!wait_data_lo(100)) {
+ xprintf("s");
+ sei();
+ return 0;
+ }
+
+ uint8_t n = 0; // bit count
+ do {
+ //
+ // |<- bit_cell_max(130) ->|
+ // | |<- lo ->|
+ // | | |<-hi->|
+ // _______
+ // | | |
+ // | 130-lo | lo-hi |
+ // |________| |
+ //
+ uint8_t lo = (uint8_t)wait_data_hi(130);
+ if (!lo) goto error; // no more bit or after stop bit
+
+ uint8_t hi = (uint8_t)wait_data_lo(lo);
+ if (!hi) goto error; // stop bit extedned by Srq?
+
+ if (n / 8 >= len) continue; // can't store in buf
+
+ buf[n / 8] <<= 1;
+ if ((130 - lo) < (lo - hi)) {
+ buf[n / 8] |= 1;
+ }
+ } while (++n);
+
+error:
+ sei();
+ return n / 8;
+}
+
+uint16_t adb_host_talk(uint8_t addr, uint8_t reg) {
+ uint8_t len;
+ uint8_t buf[8];
+ len = adb_host_talk_buf(addr, reg, buf, 8);
+ if (len != 2) return 0;
+ return (buf[0] << 8 | buf[1]);
+}
+
+void adb_host_listen_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) {
+ cli();
+ attention();
+ send_byte((addr << 4) | ADB_CMD_LISTEN | reg);
+ place_bit0(); // Stopbit(0)
+ // TODO: Service Request
+ _delay_us(200); // Tlt/Stop to Start
+ place_bit1(); // Startbit(1)
+ for (int8_t i = 0; i < len; i++) {
+ send_byte(buf[i]);
+ // xprintf("%02X ", buf[i]);
+ }
+ place_bit0(); // Stopbit(0);
+ sei();
+}
+
+void adb_host_listen(uint8_t addr, uint8_t reg, uint8_t data_h, uint8_t data_l) {
+ uint8_t buf[2] = {data_h, data_l};
+ adb_host_listen_buf(addr, reg, buf, 2);
+}
+
+void adb_host_flush(uint8_t addr) {
+ cli();
+ attention();
+ send_byte((addr << 4) | ADB_CMD_FLUSH);
+ place_bit0(); // Stopbit(0)
+ _delay_us(200); // Tlt/Stop to Start
+ sei();
+}
+
+// send state of LEDs
+void adb_host_kbd_led(uint8_t led) {
+ // Listen Register2
+ // upper byte: not used
+ // lower byte: bit2=ScrollLock, bit1=CapsLock, bit0=NumLock
+ adb_host_listen(ADB_ADDR_KEYBOARD, ADB_REG_2, 0, led & 0x07);
+}
+
+#ifdef ADB_PSW_BIT
+static inline void psw_lo() {
+ ADB_DDR |= (1 << ADB_PSW_BIT);
+ ADB_PORT &= ~(1 << ADB_PSW_BIT);
+}
+static inline void psw_hi() {
+ ADB_PORT |= (1 << ADB_PSW_BIT);
+ ADB_DDR &= ~(1 << ADB_PSW_BIT);
+}
+static inline bool psw_in() {
+ ADB_PORT |= (1 << ADB_PSW_BIT);
+ ADB_DDR &= ~(1 << ADB_PSW_BIT);
+ return ADB_PIN & (1 << ADB_PSW_BIT);
+}
+#endif
+
+static inline void attention(void) {
+ data_lo();
+ _delay_us(800 - 35); // bit1 holds lo for 35 more
+ place_bit1();
+}
+
+static inline void place_bit0(void) {
+ data_lo();
+ _delay_us(65);
+ data_hi();
+ _delay_us(35);
+}
+
+static inline void place_bit1(void) {
+ data_lo();
+ _delay_us(35);
+ data_hi();
+ _delay_us(65);
+}
+
+static inline void send_byte(uint8_t data) {
+ for (int i = 0; i < 8; i++) {
+ if (data & (0x80 >> i))
+ place_bit1();
+ else
+ place_bit0();
+ }
+}
+
+// These are carefully coded to take 6 cycles of overhead.
+// inline asm approach became too convoluted
+static inline uint16_t wait_data_lo(uint16_t us) {
+ do {
+ if (!data_in()) break;
+ _delay_us(1 - (6 * 1000000.0 / F_CPU));
+ } while (--us);
+ return us;
+}
+
+static inline uint16_t wait_data_hi(uint16_t us) {
+ do {
+ if (data_in()) break;
+ _delay_us(1 - (6 * 1000000.0 / F_CPU));
+ } while (--us);
+ return us;
+}
+
+/*
+ADB Protocol
+============
+
+Resources
+---------
+ADB - The Untold Story: Space Aliens Ate My Mouse
+ http://developer.apple.com/legacy/mac/library/#technotes/hw/hw_01.html
+ADB Manager
+ http://developer.apple.com/legacy/mac/library/documentation/mac/pdf/Devices/ADB_Manager.pdf
+ Service request(5-17)
+Apple IIgs Hardware Reference Second Edition [Chapter6 p121]
+ ftp://ftp.apple.asimov.net/pub/apple_II/documentation/Apple%20IIgs%20Hardware%20Reference.pdf
+ADB Keycode
+ http://72.0.193.250/Documentation/macppc/adbkeycodes/
+ http://m0115.web.fc2.com/m0115.jpg
+ [Inside Macintosh volume V, pages 191-192]
+ http://www.opensource.apple.com/source/IOHIDFamily/IOHIDFamily-421.18.3/IOHIDFamily/Cosmo_USB2ADB.c
+ADB Signaling
+ http://kbdbabel.sourceforge.net/doc/kbd_signaling_pcxt_ps2_adb.pdf
+ADB Overview & History
+ http://en.wikipedia.org/wiki/Apple_Desktop_Bus
+Microchip Application Note: ADB device(with code for PIC16C)
+ http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1824&appnote=en011062
+AVR ATtiny2131 ADB to PS/2 converter(Japanese)
+ http://hp.vector.co.jp/authors/VA000177/html/KeyBoardA5DEA5CBA5A2II.html
+
+
+Pinouts
+-------
+ ADB female socket from the front:
+ __________
+ | | <--- top
+ | 4o o3 |
+ |2o o1|
+ | == |
+ |________| <--- bottom
+ | | <--- 4pins
+
+
+ ADB female socket from bottom:
+
+ ========== <--- front
+ | |
+ | |
+ |2o o1|
+ |4o o3|
+ ---------- <--- back
+
+ 1: Data
+ 2: Power SW(low when press Power key)
+ 3: Vcc(5V)
+ 4: GND
+
+
+Commands
+--------
+ ADB command is 1byte and consists of 4bit-address, 2bit-command
+ type and 2bit-register. The commands are always sent by Host.
+
+ Command format:
+ 7 6 5 4 3 2 1 0
+ | | | |------------ address
+ | |-------- command type
+ | |---- register
+
+ bits commands
+ ------------------------------------------------------
+ - - - - 0 0 0 0 Send Reset(reset all devices)
+ A A A A 0 0 0 1 Flush(reset a device)
+ - - - - 0 0 1 0 Reserved
+ - - - - 0 0 1 1 Reserved
+ - - - - 0 1 - - Reserved
+ A A A A 1 0 R R Listen(write to a device)
+ A A A A 1 1 R R Talk(read from a device)
+
+ The command to read keycodes from keyboard is 0x2C which
+ consist of keyboard address 2 and Talk against register 0.
+
+ Address:
+ 2: keyboard
+ 3: mice
+
+ Registers:
+ 0: application(keyboard uses this to store its data.)
+ 1: application
+ 2: application(keyboard uses this for LEDs and state of modifiers)
+ 3: status and command
+
+
+Communication
+-------------
+ This is a minimum information for keyboard communication.
+ See "Resources" for detail.
+
+ Signaling:
+
+ ~~~~____________~~||||||||||||__~~~~~_~~|||||||||||||||__~~~~
+
+ |800us | |7 Command 0| | | |15-64 Data 0|Stopbit(0)
+ +Attention | | | +Startbit(1)
+ +Startbit(1) | +Tlt(140-260us)
+ +stopbit(0)
+
+ Bit cells:
+
+ bit0: ______~~~
+ 65 :35us
+
+ bit1: ___~~~~~~
+ 35 :65us
+
+ bit0 low time: 60-70% of bit cell(42-91us)
+ bit1 low time: 30-40% of bit cell(21-52us)
+ bit cell time: 70-130us
+ [from Apple IIgs Hardware Reference Second Edition]
+
+ Criterion for bit0/1:
+ After 55us if line is low/high then bit is 0/1.
+
+ Attention & start bit:
+ Host asserts low in 560-1040us then places start bit(1).
+
+ Tlt(Stop to Start):
+ Bus stays high in 140-260us then device places start bit(1).
+
+ Global reset:
+ Host asserts low in 2.8-5.2ms. All devices are forced to reset.
+
+ Service request from device(Srq):
+ Device can request to send at commad(Global only?) stop bit.
+ Requesting device keeps low for 140-260us at stop bit of command.
+
+
+Keyboard Data(Register0)
+ This 16bit data can contains two keycodes and two released flags.
+ First keycode is palced in upper byte. When one keyocode is sent,
+ lower byte is 0xFF.
+ Release flag is 1 when key is released.
+
+ 1514 . . . . . 8 7 6 . . . . . 0
+ | | | | | | | | | +-+-+-+-+-+-+- Keycode2
+ | | | | | | | | +--------------- Released2(1 when the key is released)
+ | +-+-+-+-+-+-+----------------- Keycode1
+ +------------------------------- Released1(1 when the key is released)
+
+ Keycodes:
+ Scancode consists of 7bit keycode and 1bit release flag.
+ Device can send two keycodes at once. If just one keycode is sent
+ keycode1 contains it and keyocode2 is 0xFF.
+
+ Power switch:
+ You can read the state from PSW line(active low) however
+ the switch has a special scancode 0x7F7F, so you can
+ also read from Data line. It uses 0xFFFF for release scancode.
+
+Keyboard LEDs & state of keys(Register2)
+ This register hold current state of three LEDs and nine keys.
+ The state of LEDs can be changed by sending Listen command.
+
+ 1514 . . . . . . 7 6 5 . 3 2 1 0
+ | | | | | | | | | | | | | | | +- LED1(NumLock)
+ | | | | | | | | | | | | | | +--- LED2(CapsLock)
+ | | | | | | | | | | | | | +----- LED3(ScrollLock)
+ | | | | | | | | | | +-+-+------- Reserved
+ | | | | | | | | | +------------- ScrollLock
+ | | | | | | | | +--------------- NumLock
+ | | | | | | | +----------------- Apple/Command
+ | | | | | | +------------------- Option
+ | | | | | +--------------------- Shift
+ | | | | +----------------------- Control
+ | | | +------------------------- Reset/Power
+ | | +--------------------------- CapsLock
+ | +----------------------------- Delete
+ +------------------------------- Reserved
+
+Address, Handler ID and bits(Register3)
+ 1514131211 . . 8 7 . . . . . . 0
+ | | | | | | | | | | | | | | | |
+ | | | | | | | | +-+-+-+-+-+-+-+- Handler ID
+ | | | | +-+-+-+----------------- Address
+ | | | +------------------------- 0
+ | | +--------------------------- Service request enable(1 = enabled)
+ | +----------------------------- Exceptional event(alwyas 1 if not used)
+ +------------------------------- 0
+
+ADB Bit Cells
+ bit cell time: 70-130us
+ low part of bit0: 60-70% of bit cell
+ low part of bit1: 30-40% of bit cell
+
+ bit cell time 70us 130us
+ --------------------------------------------
+ low part of bit0 42-49 78-91
+ high part of bit0 21-28 39-52
+ low part of bit1 21-28 39-52
+ high part of bit1 42-49 78-91
+
+
+ bit0:
+ 70us bit cell:
+ ____________~~~~~~
+ 42-49 21-28
+
+ 130us bit cell:
+ ____________~~~~~~
+ 78-91 39-52
+
+ bit1:
+ 70us bit cell:
+ ______~~~~~~~~~~~~
+ 21-28 42-49
+
+ 130us bit cell:
+ ______~~~~~~~~~~~~
+ 39-52 78-91
+
+ [from Apple IIgs Hardware Reference Second Edition]
+
+Keyboard Handle ID
+ Apple Standard Keyboard M0116: 0x01
+ Apple Extended Keyboard M0115: 0x02
+ Apple Extended Keyboard II M3501: 0x02
+ Apple Adjustable Keybaord: 0x10
+
+ http://lxr.free-electrons.com/source/drivers/macintosh/adbhid.c?v=4.4#L802
+
+END_OF_ADB
+*/
diff --git a/keyboards/converter/adb_usb/adb.h b/keyboards/converter/adb_usb/adb.h
new file mode 100644
index 0000000000..fe8becc2d5
--- /dev/null
+++ b/keyboards/converter/adb_usb/adb.h
@@ -0,0 +1,106 @@
+/*
+Copyright 2011-19 Jun WAKO <wakojun@gmail.com>
+
+This software is licensed with a Modified BSD License.
+All of this is supposed to be Free Software, Open Source, DFSG-free,
+GPL-compatible, and OK to use in both free and proprietary applications.
+Additions and corrections to this file are welcome.
+
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+* Neither the name of the copyright holders nor the names of
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#if !(defined(ADB_PORT) && defined(ADB_PIN) && defined(ADB_DDR) && defined(ADB_DATA_BIT))
+# error "ADB port setting is required in config.h"
+#endif
+
+#define ADB_POWER 0x7F
+#define ADB_CAPS 0x39
+
+/* ADB commands */
+// Default Address
+#define ADB_ADDR_0 0
+#define ADB_ADDR_DONGLE 1
+#define ADB_ADDR_KEYBOARD 2
+#define ADB_ADDR_MOUSE 3
+#define ADB_ADDR_TABLET 4
+#define ADB_ADDR_APPLIANCE 7
+#define ADB_ADDR_8 8
+#define ADB_ADDR_9 9
+#define ADB_ADDR_10 10
+#define ADB_ADDR_11 11
+#define ADB_ADDR_12 12
+#define ADB_ADDR_13 13
+#define ADB_ADDR_14 14
+#define ADB_ADDR_15 15
+// for temporary purpose, do not use for polling
+#define ADB_ADDR_TMP 15
+#define ADB_ADDR_MOUSE_POLL 10
+// Command Type
+#define ADB_CMD_RESET 0
+#define ADB_CMD_FLUSH 1
+#define ADB_CMD_LISTEN 8
+#define ADB_CMD_TALK 12
+// Register
+#define ADB_REG_0 0
+#define ADB_REG_1 1
+#define ADB_REG_2 2
+#define ADB_REG_3 3
+
+/* ADB keyboard handler id */
+#define ADB_HANDLER_STD 0x01 /* IIGS, M0116 */
+#define ADB_HANDLER_AEK 0x02 /* M0115, M3501 */
+#define ADB_HANDLER_AEK_RMOD 0x03 /* M0115, M3501, alternate mode enableing right modifiers */
+#define ADB_HANDLER_STD_ISO 0x04 /* M0118, ISO swapping keys */
+#define ADB_HANDLER_AEK_ISO 0x05 /* M0115, M3501, ISO swapping keys */
+#define ADB_HANDLER_M1242_ANSI 0x10 /* Adjustable keyboard */
+#define ADB_HANDLER_CLASSIC1_MOUSE 0x01
+#define ADB_HANDLER_CLASSIC2_MOUSE 0x02
+#define ADB_HANDLER_EXTENDED_MOUSE 0x04
+#define ADB_HANDLER_TURBO_MOUSE 0x32
+
+// ADB host
+void adb_host_init(void);
+bool adb_host_psw(void);
+uint16_t adb_host_talk(uint8_t addr, uint8_t reg);
+uint8_t adb_host_talk_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len);
+void adb_host_listen(uint8_t addr, uint8_t reg, uint8_t data_h, uint8_t data_l);
+void adb_host_listen_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len);
+void adb_host_flush(uint8_t addr);
+void adb_host_kbd_led(uint8_t led);
+uint16_t adb_host_kbd_recv(void);
+uint16_t adb_host_mouse_recv(void);
+
+// ADB Mouse
+void adb_mouse_task(void);
+void adb_mouse_init(void);
diff --git a/keyboards/converter/adb_usb/adb_usb.h b/keyboards/converter/adb_usb/adb_usb.h
index 3db303b039..ddbbd71564 100644
--- a/keyboards/converter/adb_usb/adb_usb.h
+++ b/keyboards/converter/adb_usb/adb_usb.h
@@ -17,11 +17,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
Ported to QMK by Peter Roe <pete@13bit.me>
*/
-#ifndef ADB_USB_H
-#define ADB_USB_H
+#pragma once
#include "quantum.h"
+#define XXX KC_NO
+
/* M0115/M3501 Apple Extended Keyboard ANSI
* ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,---.
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|
@@ -39,29 +40,29 @@ Ported to QMK by Peter Roe <pete@13bit.me>
* `-----------------------------------------------------------' `-----------' `---------------'
*/
#define LAYOUT_ext_ansi( \
- K35, K7A,K78,K63,K76,K60,K61,K62,K64,K65,K6D,K67,K6F, K69,K6B,K71, K7F, \
- K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K72,K73,K74, K47,K51,K4B,K43, \
- K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, K75,K77,K79, K59,K5B,K5C,K4E, \
- K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, K56,K57,K58,K45, \
- K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, K7B, K3E, K53,K54,K55, \
- K36,K3A,K37, K31, K7C,K7D, K3B,K3D,K3C, K52, K41,K4C \
+ k35, k7A, k78, k63, k76, k60, k61, k62, k64, k65, k6D, k67, k6F, k69, k6B, k71, k7F, \
+ k32, k12, k13, k14, k15, k17, k16, k1A, k1C, k19, k1D, k1B, k18, k33, k72, k73, k74, k47, k51, k4B, k43, \
+ k30, k0C, k0D, k0E, k0F, k11, k10, k20, k22, k1F, k23, k21, k1E, k2A, k75, k77, k79, k59, k5B, k5C, k4E, \
+ k39, k00, k01, k02, k03, k05, k04, k26, k28, k25, k29, k27, k24, k56, k57, k58, k45, \
+ k38, k06, k07, k08, k09, k0B, k2D, k2E, k2B, k2F, k2C, k7B, k3E, k53, k54, k55,\
+ k36, k3A, k37, k31, k7C, k7D, k3B, k3D, k3C, k52, k41, k4C \
) { \
- { K00, K01, K02, K03, K04, K05, K06, K07 }, \
- { K08, K09, KC_NO, K0B, K0C, K0D, K0E, K0F }, \
- { K10, K11, K12, K13, K14, K15, K16, K17 }, \
- { K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
- { K20, K21, K22, K23, K24, K25, K26, K27 }, \
- { K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \
- { K30, K31, K32, K33, KC_NO, K35, K36, K37 }, \
- { K38, K39, K3A, K3B, K3C, K3D, K3E, KC_NO, }, \
- { KC_NO, K41, KC_NO, K43, KC_NO, K45, KC_NO, K47 }, \
- { KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, K4E, KC_NO, }, \
- { KC_NO, K51, K52, K53, K54, K55, K56, K57 }, \
- { K58, K59, KC_NO, K5B, K5C, KC_NO, KC_NO, KC_NO, }, \
- { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \
- { KC_NO, K69, KC_NO, K6B, KC_NO, K6D, KC_NO, K6F }, \
- { KC_NO, K71, K72, K73, K74, K75, K76, K77 }, \
- { K78, K79, K7A, K7B, K7C, K7D, KC_NO, K7F } \
+ { k00, k01, k02, k03, k04, k05, k06, k07 }, \
+ { k08, k09, XXX, k0B, k0C, k0D, k0E, k0F }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17 }, \
+ { k18, k19, k1A, k1B, k1C, k1D, k1E, k1F }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27 }, \
+ { k28, k29, k2A, k2B, k2C, k2D, k2E, k2F }, \
+ { k30, k31, k32, k33, XXX, k35, k36, k37 }, \
+ { k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \
+ { XXX, k41, XXX, k43, XXX, k45, XXX, k47 }, \
+ { XXX, XXX, XXX, k4B, k4C, XXX, k4E, XXX }, \
+ { XXX, k51, k52, k53, k54, k55, k56, k57 }, \
+ { k58, k59, XXX, k5B, k5C, XXX, XXX, XXX }, \
+ { k60, k61, k62, k63, k64, k65, XXX, k67 }, \
+ { XXX, k69, XXX, k6B, XXX, k6D, XXX, k6F }, \
+ { XXX, k71, k72, k73, k74, k75, k76, k77 }, \
+ { k78, k79, k7A, k7B, k7C, k7D, XXX, k7F } \
}
/* M0116 Apple Standard Keyboard ANSI
@@ -81,29 +82,27 @@ Ported to QMK by Peter Roe <pete@13bit.me>
* +---------------------------------------------------------+ +-------+---+---+
*/
#define LAYOUT_m0116_ansi( \
- K7F, \
- K35,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K51,K4B,K43, \
- K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E, K59,K5B,K5C,K45, \
- K36,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, K56,K57,K58,K4E, \
- K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, K7B, K53,K54,K55, \
- K39,K3A,K37,K32, K31, K2A,K3B,K3C,K3D,K3E, K52, K41,K4C \
+ k7F, \
+ k35, k12, k13, k14, k15, k17, k16, k1A, k1C, k19, k1D, k1B, k18, k33, k47, k51, k4B, k43, \
+ k30, k0C, k0D, k0E, k0F, k11, k10, k20, k22, k1F, k23, k21, k1E, k59, k5B, k5C, k45, \
+ k36, k00, k01, k02, k03, k05, k04, k26, k28, k25, k29, k27, k24, k56, k57, k58, k4E, \
+ k38, k06, k07, k08, k09, k0B, k2D, k2E, k2B, k2F, k2C, k7B, k53, k54, k55, \
+ k39, k3A, k37, k32, k31, k2A, k3B, k3C, k3D, k3E, k52, k41, k4C \
) { \
- { K00, K01, K02, K03, K04, K05, K06, K07 }, \
- { K08, K09, KC_NO, K0B, K0C, K0D, K0E, K0F }, \
- { K10, K11, K12, K13, K14, K15, K16, K17 }, \
- { K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
- { K20, K21, K22, K23, K24, K25, K26, K27 }, \
- { K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \
- { K30, K31, K32, K33, KC_NO, K35, K36, K37 }, \
- { K38, K39, K3A, K3B, K3C, K3D, K3E, KC_NO }, \
- { KC_NO, K41, KC_NO, K43, KC_NO, K45, KC_NO, K47 }, \
- { KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, K4E, KC_NO }, \
- { KC_NO, K51, K52, K53, K54, K55, K56, K57 }, \
- { K58, K59, KC_NO, K5B, K5C, KC_NO, KC_NO, KC_NO }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
- { KC_NO, KC_NO, KC_NO, K7B, KC_NO, KC_NO, KC_NO, K7F } \
+ { k00, k01, k02, k03, k04, k05, k06, k07 }, \
+ { k08, k09, XXX, k0B, k0C, k0D, k0E, k0F }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17 }, \
+ { k18, k19, k1A, k1B, k1C, k1D, k1E, k1F }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27 }, \
+ { k28, k29, k2A, k2B, k2C, k2D, k2E, k2F }, \
+ { k30, k31, k32, k33, XXX, k35, k36, k37 }, \
+ { k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \
+ { XXX, k41, XXX, k43, XXX, k45, XXX, k47 }, \
+ { XXX, XXX, XXX, k4B, k4C, XXX, k4E, XXX }, \
+ { XXX, k51, k52, k53, k54, k55, k56, k57 }, \
+ { k58, k59, XXX, k5B, k5C, XXX, XXX, XXX }, \
+ { XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX }, \
+ { XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX }, \
+ { XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX }, \
+ { XXX, XXX, XXX, k7B, XXX, XXX, XXX, k7F } \
}
-
-#endif
diff --git a/keyboards/converter/adb_usb/matrix.c b/keyboards/converter/adb_usb/matrix.c
index 9e5399de5d..e6a4921960 100644
--- a/keyboards/converter/adb_usb/matrix.c
+++ b/keyboards/converter/adb_usb/matrix.c
@@ -31,6 +31,10 @@ Ported to QMK by Peter Roe <pete@13bit.me>
#include "led.h"
#include "timer.h"
+#ifndef ADB_MOUSE_MAXACC
+# define ADB_MOUSE_MAXACC 8
+#endif
+
static bool is_iso_layout = false;
// matrix state buffer(1:on, 0:off)
@@ -84,6 +88,10 @@ void matrix_init(void)
static report_mouse_t mouse_report = {};
+void housekeeping_task_kb(void) {
+ adb_mouse_task();
+}
+
void adb_mouse_task(void)
{
uint16_t codes;
diff --git a/keyboards/converter/adb_usb/rules.mk b/keyboards/converter/adb_usb/rules.mk
index 56967770b3..8f4649f556 100644
--- a/keyboards/converter/adb_usb/rules.mk
+++ b/keyboards/converter/adb_usb/rules.mk
@@ -16,7 +16,9 @@ NKRO_ENABLE = no # USB Nkey Rollover - not yet supported in LUFA
EXTRAKEY_ENABLE = yes
USB_HID_ENABLE = yes
BACKLIGHT_ENABLE = no
-#BLUETOOTH = AdafruitBLE # For Adafruit Feather 32U4 BLE support, uncomment this line
CUSTOM_MATRIX = yes
SRC = matrix.c adb.c led.c
+
+# ADB_MOUSE_ENABLE
+# OPT_DEFS += -DADB_MOUSE_ENABLE -DMOUSE_ENABLE
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 20:42:55 +0000