diff options
Diffstat (limited to 'keyboards/controllerworks/mini42/readme.md')
| -rw-r--r-- | keyboards/controllerworks/mini42/readme.md | 77 |
1 files changed, 0 insertions, 77 deletions
diff --git a/keyboards/controllerworks/mini42/readme.md b/keyboards/controllerworks/mini42/readme.md deleted file mode 100644 index 67b04b09fe..0000000000 --- a/keyboards/controllerworks/mini42/readme.md +++ /dev/null @@ -1,77 +0,0 @@ -# mini42 - - - - -*A pre-built, low profile, split mechanical keyboard based on the RP2040 processor* - -* Keyboard Maintainer: [Kevin Gee](https://github.com/controller-works) -* Hardware Supported: *mini42 split ergonomic keyboard* -* Hardware Availability: *https://controller.works/products/mini42-low-profile-ergonomic-keyboard* Hardware is available as pre-built units only. - -Make example for this keyboard (after setting up your build environment): - -```sh - make controllerworks/mini42:default -``` - -Flashing example for this keyboard: - -```sh - make controllerworks/mini42:default:flash -``` -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -## Features -- Highly integrated design with microcontroller, USB and TRRS connectors, and OLED all integrated on the main board with no secondary modules -- RP2040 processor by Raspberry Pi Foundation running at 130 MHz with 16MB flash memory -- CNC milled aluminum case with only 8mm thickness -- "PCB art" shine through back plate with gold surface finish -- 128x32 OLED on each keyboard half -- 42 per-key RGB LEDs and 12 backlight RGB LEDS are individually addressable -- ESD and over-current protection on USB and TRRS connectors -- Reset and boot tactile switches -- USB C host connection -- Hot swap connectors for Kailh Chocolate PG1350 switches -- Chocolate key spacing (18mm horizontal x 17mm vertical) -## Bootloader - -Enter the bootloader in 3 ways: - -* **Bootmagic reset**: Hold down the upper left key on the left hand keyboard half or the upper right key on the right hand keyboard half while plugging in USB -* **Physical reset button**: Press the RST button twice, rapidly -* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available - -## Pin Assignment -| Name | Pin | Left Row | Left Column | Right Row | **Right Column | -|--------|------|-----------|-------------|-----------|--------------| -| LED | GP0 | | | | | -| DATA | GP1 | | | | | -| DATA2* | GP28 | | | | | -| KEY0 | GP2 | 0 | 0 | 4 | 0 | -| KEY1 | GP3 | 0 | 1 | 4 | 1 | -| KEY2 | GP4 | 0 | 2 | 4 | 2 | -| KEY3 | GP5 | 0 | 3 | 4 | 3 | -| KEY4 | GP6 | 0 | 4 | 4 | 4 | -| KEY5 | GP7 | 0 | 5 | 4 | 5 | -| KEY6 | GP8 | 1 | 0 | 5 | 0 | -| KEY7 | GP9 | 1 | 1 | 5 | 1 | -| KEY8 | GP10 | 1 | 2 | 5 | 2 | -| KEY9 | GP11 | 1 | 3 | 5 | 3 | -| KEY10 | GP12 | 1 | 4 | 5 | 4 | -| KEY11 | GP13 | 1 | 5 | 5 | 5 | -| KEY12 | GP14 | 2 | 0 | 6 | 0 | -| KEY13 | GP15 | 2 | 1 | 6 | 1 | -| KEY14 | GP16 | 2 | 2 | 6 | 2 | -| KEY15 | GP17 | 2 | 3 | 6 | 3 | -| KEY16 | GP18 | 2 | 4 | 6 | 4 | -| KEY17 | GP19 | 2 | 5 | 6 | 5 | -| KEY18 | GP20 | 3 | 0 | 7 | 0 | -| KEY19 | GP21 | 3 | 1 | 7 | 1 | -| KEY20 | GP22 | 3 | 2 | 7 | 2 | -| SDA | GP24 | | | | | -| SCL | GP25 | | | | | - -\*DATA2 on production units, not connected on prototype units - -\** Right Column numbers run right (pinky position) to left (thumb position)
\ No newline at end of file |