diff options
Diffstat (limited to 'keyboards/controllerworks/mini42/readme.md')
| -rw-r--r-- | keyboards/controllerworks/mini42/readme.md | 77 |
1 files changed, 77 insertions, 0 deletions
diff --git a/keyboards/controllerworks/mini42/readme.md b/keyboards/controllerworks/mini42/readme.md new file mode 100644 index 0000000000..67b04b09fe --- /dev/null +++ b/keyboards/controllerworks/mini42/readme.md @@ -0,0 +1,77 @@ +# mini42 + + + + +*A pre-built, low profile, split mechanical keyboard based on the RP2040 processor* + +* Keyboard Maintainer: [Kevin Gee](https://github.com/controller-works) +* Hardware Supported: *mini42 split ergonomic keyboard* +* Hardware Availability: *https://controller.works/products/mini42-low-profile-ergonomic-keyboard* Hardware is available as pre-built units only. + +Make example for this keyboard (after setting up your build environment): + +```sh + make controllerworks/mini42:default +``` + +Flashing example for this keyboard: + +```sh + make controllerworks/mini42:default:flash +``` +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Features +- Highly integrated design with microcontroller, USB and TRRS connectors, and OLED all integrated on the main board with no secondary modules +- RP2040 processor by Raspberry Pi Foundation running at 130 MHz with 16MB flash memory +- CNC milled aluminum case with only 8mm thickness +- "PCB art" shine through back plate with gold surface finish +- 128x32 OLED on each keyboard half +- 42 per-key RGB LEDs and 12 backlight RGB LEDS are individually addressable +- ESD and over-current protection on USB and TRRS connectors +- Reset and boot tactile switches +- USB C host connection +- Hot swap connectors for Kailh Chocolate PG1350 switches +- Chocolate key spacing (18mm horizontal x 17mm vertical) +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the upper left key on the left hand keyboard half or the upper right key on the right hand keyboard half while plugging in USB +* **Physical reset button**: Press the RST button twice, rapidly +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available + +## Pin Assignment +| Name | Pin | Left Row | Left Column | Right Row | **Right Column | +|--------|------|-----------|-------------|-----------|--------------| +| LED | GP0 | | | | | +| DATA | GP1 | | | | | +| DATA2* | GP28 | | | | | +| KEY0 | GP2 | 0 | 0 | 4 | 0 | +| KEY1 | GP3 | 0 | 1 | 4 | 1 | +| KEY2 | GP4 | 0 | 2 | 4 | 2 | +| KEY3 | GP5 | 0 | 3 | 4 | 3 | +| KEY4 | GP6 | 0 | 4 | 4 | 4 | +| KEY5 | GP7 | 0 | 5 | 4 | 5 | +| KEY6 | GP8 | 1 | 0 | 5 | 0 | +| KEY7 | GP9 | 1 | 1 | 5 | 1 | +| KEY8 | GP10 | 1 | 2 | 5 | 2 | +| KEY9 | GP11 | 1 | 3 | 5 | 3 | +| KEY10 | GP12 | 1 | 4 | 5 | 4 | +| KEY11 | GP13 | 1 | 5 | 5 | 5 | +| KEY12 | GP14 | 2 | 0 | 6 | 0 | +| KEY13 | GP15 | 2 | 1 | 6 | 1 | +| KEY14 | GP16 | 2 | 2 | 6 | 2 | +| KEY15 | GP17 | 2 | 3 | 6 | 3 | +| KEY16 | GP18 | 2 | 4 | 6 | 4 | +| KEY17 | GP19 | 2 | 5 | 6 | 5 | +| KEY18 | GP20 | 3 | 0 | 7 | 0 | +| KEY19 | GP21 | 3 | 1 | 7 | 1 | +| KEY20 | GP22 | 3 | 2 | 7 | 2 | +| SDA | GP24 | | | | | +| SCL | GP25 | | | | | + +\*DATA2 on production units, not connected on prototype units + +\** Right Column numbers run right (pinky position) to left (thumb position)
\ No newline at end of file |