diff options
Diffstat (limited to 'keyboards/clueboard')
17 files changed, 2099 insertions, 143 deletions
diff --git a/keyboards/clueboard/66_hotswap/66_hotswap.h b/keyboards/clueboard/66_hotswap/66_hotswap.h index 9367c26337..a1ea44841f 100644 --- a/keyboards/clueboard/66_hotswap/66_hotswap.h +++ b/keyboards/clueboard/66_hotswap/66_hotswap.h @@ -3,3 +3,7 @@ #ifdef KEYBOARD_clueboard_66_hotswap_gen1 #include "gen1.h" #endif + +#ifdef KEYBOARD_clueboard_66_hotswap_prototype + #include "prototype.h" +#endif diff --git a/keyboards/clueboard/66_hotswap/config.h b/keyboards/clueboard/66_hotswap/config.h index 88adb57378..2c265c9470 100644 --- a/keyboards/clueboard/66_hotswap/config.h +++ b/keyboards/clueboard/66_hotswap/config.h @@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once - #include "config_common.h" /* USB Device descriptor parameter */ diff --git a/keyboards/clueboard/66_hotswap/gen1/chconf.h b/keyboards/clueboard/66_hotswap/gen1/chconf.h new file mode 100644 index 0000000000..1d9f12ff1f --- /dev/null +++ b/keyboards/clueboard/66_hotswap/gen1/chconf.h @@ -0,0 +1,520 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 100000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY TRUE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/clueboard/66_hotswap/gen1/config.h b/keyboards/clueboard/66_hotswap/gen1/config.h index d5d36d4a1c..6b0cfb60b5 100644 --- a/keyboards/clueboard/66_hotswap/gen1/config.h +++ b/keyboards/clueboard/66_hotswap/gen1/config.h @@ -1,44 +1,146 @@ -#pragma once +/* + * Copyright 2017 skully <skullydazed@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once #include "config_common.h" -#define PRODUCT_ID 0x2390 +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xC1ED +#define PRODUCT_ID 0x2391 #define DEVICE_VER 0x0001 +#define MANUFACTURER Clueboard + +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here: + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 /* key matrix size */ #define MATRIX_ROWS 10 #define MATRIX_COLS 8 -/* ROWS: Top to bottom, COLS: Left to right +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * */ -#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 } -#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 } -#define UNUSED_PINS +#define MATRIX_ROW_PINS { B11, A6, A3, A2, A1, B5, B6, C15, C14, C13 } +#define MATRIX_COL_PINS { B10, B2, B1, B0, A7, B4, B3, B7 } +#define UNUSED_PINS { A0, A8, A15, B12, B13, B14, B15 } +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 6 -/* Speaker configuration +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * */ -#define B7_AUDIO -#define NO_MUSIC_MODE -#define AUDIO_CLICKY +//#define FORCE_NKRO + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) -/* Backlight configuration +/* + * Feature disable options + * These options are also useful to firmware size reduction. */ -#define BACKLIGHT_LEVELS 1 -/* Underlight configuration +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options */ -#define RGB_DI_PIN D7 -#define RGBLED_NUM 26 // Number of LEDs -#define RGBLIGHT_HUE_STEP 32 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -#define RGBLIGHT_ANIMATIONS -#define RGBLIGHT_EFFECT_BREATHE_CENTER 1 -#define RGBLIGHT_EFFECT_BREATHE_MAX 200 -#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2 -#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1 -#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 4 // How many LEDs wide to light up -#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 16 // The led to start at -#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 8 // How many LEDs to travel -#define RGBLIGHT_EFFECT_SNAKE_LENGTH 4 // How many LEDs wide to light up + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + + /* Backlight configuration + */ +#define BACKLIGHT_LEVELS 10 + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 0b1110100 AD <-> GND +// 0b1110111 AD <-> VCC +// 0b1110101 AD <-> SCL +// 0b1110110 AD <-> SDA +#define LED_DRIVER_ADDR_1 0b1110100 +#define I2C1_BANK GPIOB +#define I2C1_SCL 8 +#define I2C1_SDA 9 + +#define LED_DRIVER_COUNT 1 +#define LED_DRIVER_LED_COUNT 71 diff --git a/keyboards/clueboard/66_hotswap/gen1/gen1.c b/keyboards/clueboard/66_hotswap/gen1/gen1.c index 01f74bc50b..c70f223756 100644 --- a/keyboards/clueboard/66_hotswap/gen1/gen1.c +++ b/keyboards/clueboard/66_hotswap/gen1/gen1.c @@ -1,63 +1,186 @@ +/* Copyright 2017 Clueboard <info@clueboard.co> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include "gen1.h" -#include <avr/io.h> -#include "backlight.h" -#include "print.h" +#include "is31fl3731-simple.h" void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); - - // JTAG disable for PORT F. write JTD bit twice within four cycles. - MCUCR |= (1<<JTD); - MCUCR |= (1<<JTD); } - void matrix_scan_kb(void) { - matrix_scan_user(); } -void backlight_init_ports(void) { - print("init_backlight_pin()\n"); - // Set our LED pins as output - DDRD |= (1<<0); // Esc - DDRD |= (1<<4); // Page Up - DDRD |= (1<<1); // Arrows - - // Set our LED pins low - PORTD &= ~(1<<0); // Esc - PORTD &= ~(1<<4); // Page Up - PORTD &= ~(1<<1); // Arrows -} +#ifdef LED_MATRIX_ENABLE +const is31_led g_is31_leds[LED_DRIVER_LED_COUNT] = { +/* Refer to IS31 manual for these locations + * driver + * | LED address + * | | */ + {0, C1_1}, // k00 KC_GESC + {0, C1_2}, // k01 KC_1 + {0, C1_3}, // k02 KC_2 + {0, C1_4}, // k03 KC_3 + {0, C1_5}, // k04 KC_4 + {0, C1_6}, // k05 KC_5 + {0, C1_7}, // k06 KC_6 + {0, C1_8}, // k07 KC_7 + {0, C1_9}, // k50 KC_8 + {0, C1_10}, // k51 KC_9 + {0, C1_11}, // k52 KC_0 + {0, C1_12}, // k53 KC_MINS + {0, C1_13}, // k54 KC_EQL + {0, C1_14}, // k55 KC_BSPC + {0, C1_15}, // k57 KC_PGUP + {0, C2_1}, // k10 KC_TAB + {0, C2_2}, // k11 KC_Q + {0, C2_3}, // k12 KC_W + {0, C2_4}, // k13 KC_E + {0, C2_5}, // k14 KC_R + {0, C2_6}, // k15 KC_T + {0, C2_7}, // k16 KC_Y + {0, C2_8}, // k17 KC_U + {0, C2_9}, // k60 KC_I + {0, C2_10}, // k61 KC_O + {0, C2_11}, // k62 KC_P + {0, C2_12}, // k63 KC_LBRC + {0, C2_13}, // k64 KC_RBRC + {0, C2_14}, // k65 KC_BSLS + {0, C2_15}, // k67 KC_PGDN + {0, C3_1}, // k20 KC_CAPS + {0, C3_2}, // k21 KC_A + {0, C3_3}, // k22 KC_S + {0, C3_4}, // k23 KC_D + {0, C3_5}, // k24 KC_F + {0, C3_6}, // k25 KC_G + {0, C3_7}, // k26 KC_H + {0, C3_8}, // k27 KC_J + {0, C3_9}, // k70 KC_K + {0, C3_10}, // k71 KC_L + {0, C3_11}, // k72 KC_SCLN + {0, C3_12}, // k73 KC_QUOT + {0, C3_14}, // k75 KC_ENT + {0, C4_1}, // k30 KC_LSFT + {0, C4_3}, // k32 KC_Z + {0, C4_4}, // k33 KC_X + {0, C4_5}, // k34 KC_C + {0, C4_6}, // k35 KC_V + {0, C4_7}, // k36 KC_B + {0, C4_8}, // k37 KC_N + {0, C4_9}, // k80 KC_M + {0, C4_10}, // k81 KC_COMM + {0, C4_11}, // k82 KC_DOT + {0, C4_12}, // k83 KC_SLSH + {0, C4_13}, // k85 KC_RSFT + {0, C4_14}, // k86 KC_UP + {0, C5_1}, // k40 KC_LCTL + {0, C5_2}, // k41 KC_LGUI + {0, C5_3}, // k42 KC_LALT + {0, C5_4}, // Unassociated between LALT and SPACE_2.75 + {0, C5_5}, // k45 KC_SPC SPACE_2.75 + {0, C5_6}, // k45 KC_SPC SPACE_6.75 + {0, C5_7}, // k46 KC_SPC SPACE_2.25 + {0, C5_8}, // Unassociated between SPACE_2.25 and SPACE_1.25 + {0, C5_9}, // k90 KC_RGUI + {0, C5_10}, // k92 KC_RALT + {0, C5_11}, // k93 MO(_FL) + {0, C5_12}, // k94 KC_RCTL + {0, C5_13}, // k95 KC_LEFT + {0, C5_14}, // k96 KC_DOWN + {0, C5_15} // k97 KC_RGHT +}; -void backlight_set(uint8_t level) { - if ( level == 0 ) { - // Turn off light - PORTD |= (1<<0); // Esc - PORTD |= (1<<4); // Page Up - PORTD |= (1<<1); // Arrows - } else { - // Turn on light - PORTD &= ~(1<<0); // Esc - PORTD &= ~(1<<4); // Page Up - PORTD &= ~(1<<1); // Arrows - } -} +const led_matrix g_leds[LED_DRIVER_LED_COUNT] = { -void led_init_ports() { - // * Set our LED pins as output - DDRB |= (1<<4); -} + /*{row | col << 4} + | LED_ROW_COL(row, col) + | | modifier + | | | */ + {{0|(1<<4)}, {0, 0}, 1}, // k00 KC_GESC + {{0|(2<<4)}, {14.45, 0}, 0}, // k01 KC_1 + {{0|(3<<4)}, {28.9, 0}, 0}, // k02 KC_2 + {{0|(4<<4)}, {43.35, 0}, 0}, // k03 KC_3 + {{0|(5<<4)}, {57.8, 0}, 0}, // k04 KC_4 + {{0|(6<<4)}, {72.25, 0}, 0}, // k05 KC_5 + {{0|(7<<4)}, {86.7, 0}, 0}, // k06 KC_6 + {{0|(8<<4)}, {101.2, 0}, 0}, // k07 KC_7 + {{0|(9<<4)}, {115.6, 0}, 0}, // k50 KC_8 + {{0|(10<<4)}, {130, 0}, 0}, // k51 KC_9 + {{0|(11<<4)}, {144.5, 0}, 0}, // k52 KC_0 + {{0|(12<<4)}, {159, 0}, 0}, // k53 KC_MINS + {{0|(13<<4)}, {173.4, 0}, 0}, // k54 KC_EQL + {{0|(14<<4)}, {195.1, 0}, 1}, // k55 KC_BSPC + {{0|(15<<4)}, {224, 0}, 1}, // k57 KC_PGUP -void led_set_kb(uint8_t usb_led) { - DDRB |= (1<<4); - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // Turn capslock on - PORTB |= (1<<4); - } else { - // Turn capslock off - PORTB &= ~(1<<4); - } -} + {{1|(0<<4)}, {3.6125, 16}, 1}, // k10 KC_TAB + {{1|(1<<4)}, {21.675, 16}, 0}, // k11 KC_Q + {{1|(2<<4)}, {36.125, 16}, 0}, // k12 KC_W + {{1|(3<<4)}, {50.575, 16}, 0}, // k13 KC_E + {{1|(4<<4)}, {65.025, 16}, 0}, // k14 KC_R + {{1|(5<<4)}, {79.475, 16}, 0}, // k15 KC_T + {{1|(6<<4)}, {93.925, 16}, 0}, // k16 KC_Y + {{1|(7<<4)}, {108.375, 16}, 0}, // k17 KC_U + {{1|(8<<4)}, {122.825, 16}, 0}, // k60 KC_I + {{1|(9<<4)}, {137.275, 16}, 0}, // k61 KC_O + {{1|(10<<4)}, {151.725, 16}, 0}, // k62 KC_P + {{1|(11<<4)}, {166.175, 16}, 0}, // k63 KC_LBRC + {{1|(12<<4)}, {180.625, 16}, 0}, // k64 KC_RBRC + {{1|(13<<4)}, {198.6875, 16}, 1}, // k65 KC_BSLS + {{1|(14<<4)}, {224, 16}, 1}, // k67 KC_PGDN + + {{2|(0<<4)}, {5.41875, 32}, 1}, // k20 KC_CAPS + {{2|(1<<4)}, {25.2875, 32}, 0}, // k21 KC_A + {{2|(2<<4)}, {39.7375, 32}, 0}, // k22 KC_S + {{2|(3<<4)}, {54.1875, 32}, 0}, // k23 KC_D + {{2|(4<<4)}, {68.6375, 32}, 0}, // k24 KC_F + {{2|(5<<4)}, {83.0875, 32}, 0}, // k25 KC_G + {{2|(6<<4)}, {97.5375, 32}, 0}, // k26 KC_H + {{2|(7<<4)}, {111.9875, 32}, 0}, // k27 KC |