7 files changed, 26 insertions, 109 deletions
diff --git a/keyboards/clueboard/66/rev1/config.h b/keyboards/clueboard/66/rev1/config.h
index 9db64fbd49..6b61ca4d14 100644
--- a/keyboards/clueboard/66/rev1/config.h
+++ b/keyboards/clueboard/66/rev1/config.h
@@ -50,6 +50,8 @@
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
+#define LED_CAPS_LOCK_PIN F0
+
 /* Underlight configuration
  */
 #define RGB_DI_PIN B2
diff --git a/keyboards/clueboard/66/rev1/rev1.c b/keyboards/clueboard/66/rev1/rev1.c
index 90fc6956c9..520a869e57 100644
--- a/keyboards/clueboard/66/rev1/rev1.c
+++ b/keyboards/clueboard/66/rev1/rev1.c
@@ -1,17 +1 @@
 #include "rev1.h"
-
-void led_init_ports() {
-    // * Set our LED pins as output
-    DDRF |= (1<<0);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    DDRF |= (1<<0);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTF |= (1<<0);
-    } else {
-        // Turn capslock off
-        PORTF &= ~(1<<0);
-    }
-}
diff --git a/keyboards/clueboard/66/rev2/config.h b/keyboards/clueboard/66/rev2/config.h
index f11cfe82f7..a1e4804cad 100644
--- a/keyboards/clueboard/66/rev2/config.h
+++ b/keyboards/clueboard/66/rev2/config.h
@@ -49,7 +49,9 @@
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
- /* Backlight configuration
+#define LED_CAPS_LOCK_PIN B4
+
+/* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 1
 
diff --git a/keyboards/clueboard/66/rev2/rev2.c b/keyboards/clueboard/66/rev2/rev2.c
index d676b6d5fb..a533c550aa 100644
--- a/keyboards/clueboard/66/rev2/rev2.c
+++ b/keyboards/clueboard/66/rev2/rev2.c
@@ -1,20 +1,6 @@
 #include "rev2.h"
-#include <avr/io.h>
-#include "backlight.h"
 #include "print.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-}
-
-
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
 void backlight_init_ports(void) {
     print("init_backlight_pin()\n");
     // Set our LED pins as output
@@ -41,19 +27,3 @@ void backlight_set(uint8_t level) {
         PORTD &= ~(1<<4); // Arrows
     }
 }
-
-void led_init_ports() {
-    // * Set our LED pins as output
-    DDRB |= (1<<4);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    DDRB |= (1<<4);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTB |= (1<<4);
-    } else {
-        // Turn capslock off
-        PORTB &= ~(1<<4);
-    }
-}
diff --git a/keyboards/clueboard/66/rev3/config.h b/keyboards/clueboard/66/rev3/config.h
index bbbd82a1c0..2d063d4e61 100644
--- a/keyboards/clueboard/66/rev3/config.h
+++ b/keyboards/clueboard/66/rev3/config.h
@@ -49,7 +49,9 @@
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
- /* Backlight configuration
+#define LED_CAPS_LOCK_PIN B4
+
+/* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 1
 
diff --git a/keyboards/clueboard/66/rev3/rev3.c b/keyboards/clueboard/66/rev3/rev3.c
index 195a21a9e8..7ec8dcb681 100644
--- a/keyboards/clueboard/66/rev3/rev3.c
+++ b/keyboards/clueboard/66/rev3/rev3.c
@@ -1,20 +1,6 @@
 #include "rev3.h"
-#include <avr/io.h>
-#include "backlight.h"
 #include "print.h"
 
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    matrix_init_user();
-    led_init_ports();
-}
-
-
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
 void backlight_init_ports(void) {
     print("init_backlight_pin()\n");
     // Set our LED pins as output
@@ -41,19 +27,3 @@ void backlight_set(uint8_t level) {
         PORTD &= ~(1<<4); // Arrows
     }
 }
-
-void led_init_ports() {
-    // * Set our LED pins as output
-    DDRB |= (1<<4);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    DDRB |= (1<<4);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTB |= (1<<4);
-    } else {
-        // Turn capslock off
-        PORTB &= ~(1<<4);
-    }
-}
diff --git a/keyboards/clueboard/66/rev4/rev4.c b/keyboards/clueboard/66/rev4/rev4.c
index 69eb48183e..00d4f325e5 100644
--- a/keyboards/clueboard/66/rev4/rev4.c
+++ b/keyboards/clueboard/66/rev4/rev4.c
@@ -1,43 +1,30 @@
 #include "rev4.h"
-//#include "backlight.h"
 
 void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    matrix_init_user();
     led_init_ports();
+
+    matrix_init_user();
 }
 
 void led_init_ports() {
     // Set our LED pins as output
-    palSetPadMode(GPIOB, 13, PAL_MODE_OUTPUT_PUSHPULL); // LED1
-    palClearPad(GPIOB, 13);
-    palSetPadMode(GPIOB, 14, PAL_MODE_OUTPUT_PUSHPULL); // LED2
-    palClearPad(GPIOB, 14);
-    palSetPadMode(GPIOA, 8, PAL_MODE_OUTPUT_PUSHPULL); // LED3
-    palClearPad(GPIOA, 8);
-    palSetPadMode(GPIOA, 0, PAL_MODE_OUTPUT_PUSHPULL); // Capslock LED
-    palClearPad(GPIOA, 0);
+    setPinOutput(B13); // LED1
+    writePinLow(B13);
+    setPinOutput(B14); // LED2
+    writePinLow(B14);
+    setPinOutput(A8); // LED3
+    writePinLow(A8);
+    setPinOutput(A0); // Capslock LED
+    writePinLow(A0);
 }
 
-void led_set_kb(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-        palSetPad(GPIOB, 13);    // LED1
-    } else {
-        palClearPad(GPIOB, 13);  // LED1
-    }
-
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        palSetPad(GPIOA, 0);     // Capslock LED
-        palSetPad(GPIOB, 14);    // LED2
-    } else {
-        palClearPad(GPIOA, 0);   // Capslock LED
-        palClearPad(GPIOB, 14);  // LED2
-    }
-
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
-        palSetPad(GPIOA, 8);     // LED3
-    } else {
-        palClearPad(GPIOA, 8);   // LED3
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res) {
+        writePin(B13, led_state.num_lock);
+        writePin(A0, led_state.caps_lock);
+        writePin(B14, led_state.caps_lock);
+        writePin(A8, led_state.scroll_lock);
     }
+    return res;
 }