summaryrefslogtreecommitdiffstats
path: root/keyboards/clueboard/60/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/clueboard/60/config.h')
-rw-r--r--keyboards/clueboard/60/config.h98
1 files changed, 0 insertions, 98 deletions
diff --git a/keyboards/clueboard/60/config.h b/keyboards/clueboard/60/config.h
index 3f54d0a9da..1ca9d9844e 100644
--- a/keyboards/clueboard/60/config.h
+++ b/keyboards/clueboard/60/config.h
@@ -19,110 +19,12 @@
#include "config_common.h"
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xC1ED
-#define PRODUCT_ID 0x2350
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Clueboard
-#define PRODUCT Clueboard 60%
-#define DESCRIPTION Clueboard 60%
-
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here:
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-/*
- * Keyboard Matrix Assignments
- *
- * COLS: Pins used for columns, left to right
- * ROWS: Pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, A15, A10 }
-#define MATRIX_COL_PINS { A2, A3, A6, B14, B15, A8, A9, A7, B3, B4, C15, C14, C13, B5, B6 }
-#define UNUSED_PINS { A0, A1, A9, B7, B8, B9, B10, B11, B12, B13 }
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 6
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
- - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
- - MIDI notes can be added to the keymap
- - Octave shift and transpose
- - Virtual sustain, portamento, and modulation wheel
- - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-#define LED_CAPS_LOCK_PIN B7
-
/* Backlight configuration
*/
#define BACKLIGHT_LEVELS 1