diff options
Diffstat (limited to 'keyboards/ckeys')
-rw-r--r-- | keyboards/ckeys/nakey/config.h | 190 | ||||
-rw-r--r-- | keyboards/ckeys/nakey/info.json | 12 | ||||
-rw-r--r-- | keyboards/ckeys/nakey/keymaps/default/keymap.c | 62 | ||||
-rw-r--r-- | keyboards/ckeys/nakey/keymaps/default/readme.md | 1 | ||||
-rw-r--r-- | keyboards/ckeys/nakey/nakey.c | 42 | ||||
-rw-r--r-- | keyboards/ckeys/nakey/nakey.h | 40 | ||||
-rw-r--r-- | keyboards/ckeys/nakey/readme.md | 49 | ||||
-rw-r--r-- | keyboards/ckeys/nakey/rules.mk | 68 | ||||
-rw-r--r-- | keyboards/ckeys/obelus/config.h | 168 | ||||
-rw-r--r-- | keyboards/ckeys/obelus/keymaps/default/config.h | 6 | ||||
-rw-r--r-- | keyboards/ckeys/obelus/keymaps/default/keymap.c | 116 | ||||
-rw-r--r-- | keyboards/ckeys/obelus/keymaps/default/readme.md | 1 | ||||
-rw-r--r-- | keyboards/ckeys/obelus/obelus.c | 28 | ||||
-rw-r--r-- | keyboards/ckeys/obelus/obelus.h | 23 | ||||
-rw-r--r-- | keyboards/ckeys/obelus/readme.md | 19 | ||||
-rw-r--r-- | keyboards/ckeys/obelus/rules.mk | 68 | ||||
-rw-r--r-- | keyboards/ckeys/readme.md | 9 |
17 files changed, 902 insertions, 0 deletions
diff --git a/keyboards/ckeys/nakey/config.h b/keyboards/ckeys/nakey/config.h new file mode 100644 index 0000000000..38fed297ef --- /dev/null +++ b/keyboards/ckeys/nakey/config.h @@ -0,0 +1,190 @@ +/* +Copyright 2018 James Underwood + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER cKeys +#define PRODUCT naKey +#define DESCRIPTION The cKeys through hole ten key pad + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F1, F4, F5, F6, F7 } +#define MATRIX_COL_PINS { B0, B1, B2, B3 } +#define UNUSED_PINS { D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, B4, B5, B6, B7 } + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +#endif diff --git a/keyboards/ckeys/nakey/info.json b/keyboards/ckeys/nakey/info.json new file mode 100644 index 0000000000..b44d0daf74 --- /dev/null +++ b/keyboards/ckeys/nakey/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "naKey", + "url": "", + "maintainer": "qmk", + "width": 4, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"Enter", "x":3, "y":3, "h":2}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}] + } + } +} diff --git a/keyboards/ckeys/nakey/keymaps/default/keymap.c b/keyboards/ckeys/nakey/keymaps/default/keymap.c new file mode 100644 index 0000000000..ebbb128bd2 --- /dev/null +++ b/keyboards/ckeys/nakey/keymaps/default/keymap.c @@ -0,0 +1,62 @@ +/* Copyright 2018 James Underwood + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT( /* Base */ + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ + KC_P7, KC_P8, KC_P9, KC_PPLS, \ + KC_P4, KC_P5, KC_P6, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + KC_P0, KC_PDOT \ +), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/ckeys/nakey/keymaps/default/readme.md b/keyboards/ckeys/nakey/keymaps/default/readme.md new file mode 100644 index 0000000000..c842dc99a7 --- /dev/null +++ b/keyboards/ckeys/nakey/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for naKey diff --git a/keyboards/ckeys/nakey/nakey.c b/keyboards/ckeys/nakey/nakey.c new file mode 100644 index 0000000000..ba2fb90ebe --- /dev/null +++ b/keyboards/ckeys/nakey/nakey.c @@ -0,0 +1,42 @@ +/* Copyright 2018 James Underwood + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "nakey.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/ckeys/nakey/nakey.h b/keyboards/ckeys/nakey/nakey.h new file mode 100644 index 0000000000..3cbfda844d --- /dev/null +++ b/keyboards/ckeys/nakey/nakey.h @@ -0,0 +1,40 @@ +/* Copyright 2018 James Underwood + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef NAKEY_H +#define NAKEY_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define LAYOUT( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, \ + k30, k31, k32, k33, \ + k40, k41 \ +) \ +{ \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 }, \ + { k20, k21, k22, KC_NO }, \ + { k30, k31, k32, k33 }, \ + { k40, KC_NO, k41, KC_NO }, \ +} + +#endif diff --git a/keyboards/ckeys/nakey/readme.md b/keyboards/ckeys/nakey/readme.md new file mode 100644 index 0000000000..c7250cf506 --- /dev/null +++ b/keyboards/ckeys/nakey/readme.md @@ -0,0 +1,49 @@ +# naKey + +Firmware for custom keyboard + +Keyboard Maintainer: [James Underwood](https://github.com/ju0) +Hardware Supported: naKey +Hardware Availability: [ckeys.org](https://ckeys.org) + +To build this keyboard, follow the [build guide](https://ckeys.org/tutorials/nakey-numpad-build-guide/). + +Make example for this keyboard (after setting up your build environment): + + make ckeys/nakey:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the root folder. Once your dev env is setup, you'll be able to type `make ckeys/nakey:default` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +(Note: replace naKey with the name of your keyboard.) + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make ckeys/nakey:default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder. Create a `readme.md` and a `keymap.c` file to complete your new keymap. When you are done your file tree should look like this: + +* `qmk_firmware/` + * `keyboard/` + * `keymaps/` + * `config.h` (optional) + * `keymap.c` + * `readme.md` + * `rules.mk` (optional) + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make naKey-[default|jack|<name>] +``` diff --git a/keyboards/ckeys/nakey/rules.mk b/keyboards/ckeys/nakey/rules.mk new file mode 100644 index 0000000000..a3571e8deb --- /dev/null +++ b/keyboards/ckeys/nakey/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1286 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches diff --git a/keyboards/ckeys/obelus/config.h b/keyboards/ckeys/obelus/config.h new file mode 100644 index 0000000000..a1451c1420 --- /dev/null +++ b/keyboards/ckeys/obelus/config.h @@ -0,0 +1,168 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER You +#define PRODUCT obelus +#define DESCRIPTION 4x4 QMK test platform + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F4, F5, F6, F7 } +#define MATRIX_COL_PINS { F0, F1, B2, B3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#ifdef AUDIO_ENABLE + #define AUDIO_VOICES + #define C6_AUDIO + #define STARTUP_SONG SONG(STARTUP_SOUND) +#endif + +#endif diff --git a/keyboards/ckeys/obelus/keymaps/default/config.h b/keyboards/ckeys/obelus/keymaps/default/config.h new file mode 100644 index 0000000000..04bf9f4a9d --- /dev/null +++ b/keyboards/ckeys/obelus/keymaps/default/config.h @@ -0,0 +1,6 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" +// Add overrides here +#endif diff --git a/keyboards/ckeys/obelus/keymaps/default/keymap.c b/keyboards/ckeys/obelus/keymaps/default/keymap.c new file mode 100644 index 0000000000..a9b15e9347 --- /dev/null +++ b/keyboards/ckeys/obelus/keymaps/default/keymap.c @@ -0,0 +1,116 @@ +#include "obelus.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +extern keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* LAYERS + * ,-----------------------. + * | | | |RESET| + * |-----+-----+-----+-----| + * |MUSIC| | | | + * |-----+-----+-----+-----| + * |NUMPD| NAV |GAMES| | + * |-----+-----+-----+-----| + * | | | | | + * `---------------------- ' + */ +[0] = KEYMAP( /* LAYER SELECT */ + KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ + TO(4), KC_TRNS, KC_TRNS, KC_TRNS, \ + TO(1), TO(2), TO(3), KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ +), + /* NUMPAD + * ,-----------------------. + * | 7 | 8 | 9 | * | + * |-----+-----+-----+-----| + * | 4 | 5 | 6 | - | + * |-----+-----+-----+-----| + * | 1 | 2 | 3 | + | + * |-----+-----+-----+-----| + * | 0 | . | / | = | + * `---------------------- ' + */ +[1] = KEYMAP( /* NUMPAD */ + KC_P7, KC_P8, KC_P9, KC_PAST, \ + KC_P4, KC_P5, KC_P6, KC_PMNS, \ + KC_P1, KC_P2, KC_P3, KC_PPLS, \ + KC_P0, KC_PDOT, KC_PSLS, LT(5,KC_PENT) \ +), + /* NUMPAD SUPPLEMENT + * ,-----------------------. + * |NUMLK| | | | + * |-----+-----+-----+-----| + * | | | | | + * |-----+-----+-----+-----| + * | | | | | + * |-----+-----+-----+-----| + * | | | | | + * `---------------------- ' + */ +[5] = KEYMAP( /* NUMPAD SUPPLEMENT */ + KC_NLCK, KC_TRNS, KC_TRNS, TO(0), \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ +), + /* NAV + * ,-----------------------. + * | INS |PGUP | TAB |PRSCR| + * |-----+-----+-----+-----| + * | DEL |PGDN |VOLD |VOLU | + * |-----+-----+-----+-----| + * |HOME | UP | END | | + * |-----+-----+-----+-----| + * |LEFT |DOWN |RIGHT|ENTER| + * `---------------------- ' + */ +[2] = KEYMAP( /* NAV CLUSTER */ + KC_INS, KC_PGUP, KC_TAB, KC_PSCR, \ + KC_DEL, KC_PGDN, KC_VOLD, KC_VOLU, \ + KC_HOME, KC_UP, KC_END, TO(0), \ + KC_LEFT, KC_DOWN, KC_RGHT, KC_ENT \ +), + /* GAMING + * ,-----------------------. + * | ESC | 1 | 2 | 3 | + * |-----+-----+-----+-----| + * | TAB | Q | W | E | + * |-----+-----+-----+-----| + * |SHIFT| A | S | D | + * |-----+-----+-----+-----| + * |CTRL | C | R |SPACE| + * `---------------------- ' + */ +[3] = KEYMAP( /* GAMING */ + LT(4, KC_ESC), KC_1, KC_2, KC_3, \ + KC_TAB, KC_Q, KC_W, KC_E, \ + KC_LSFT, KC_A, KC_S, KC_D, \ + KC_LCTL, KC_C, KC_R, KC_SPC \ +), + /* MUSIC + * ,-----------------------. + * | | | | | + * |-----+-----+-----+-----| + * | | | | | + * |-----+-----+-----+-----| + * | | | | | + * |-----+-----+-----+-----| + * |TOGGL|MODE | | | + * `---------------------- ' + */ +[4] = KEYMAP( /* NUMPAD SUPPLEMENT */ + KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, \ + MU_TOG, MU_MOD, KC_NO, TO(0) \ +), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} diff --git a/keyboards/ckeys/obelus/keymaps/default/readme.md b/keyboards/ckeys/obelus/keymaps/default/readme.md new file mode 100644 index 0000000000..bac51fc043 --- /dev/null +++ b/keyboards/ckeys/obelus/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for obelus
\ No newline at end of file diff --git a/keyboards/ckeys/obelus/obelus.c b/keyboards/ckeys/obelus/obelus.c new file mode 100644 index 0000000000..2905f0724d --- /dev/null +++ b/keyboards/ckeys/obelus/obelus.c @@ -0,0 +1,28 @@ +#include "obelus.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + // Turn status LED on + DDRD |= (1<<6); + PORTD |= (1<<6); + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} diff --git a/keyboards/ckeys/obelus/obelus.h b/keyboards/ckeys/obelus/obelus.h new file mode 100644 index 0000000000..8444be897c --- /dev/null +++ b/keyboards/ckeys/obelus/obelus.h @@ -0,0 +1,23 @@ +#ifndef OBELUS_H +#define OBELUS_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23, \ + k30, k31, k32, k33 \ +) \ +{ \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 }, \ + { k20, k21, k22, k23 }, \ + { k30, k31, k32, k33 } \ +} + +#endif diff --git a/keyboards/ckeys/obelus/readme.md b/keyboards/ckeys/obelus/readme.md new file mode 100644 index 0000000000..6767956bf9 --- /dev/null +++ b/keyboards/ckeys/obelus/readme.md @@ -0,0 +1,19 @@ +Obelus +=== + +[The Obelus](https://imgur.com/a/vj4LF) is designed to provide an easy platform to work with for people who are new to building keyboards. It is also especially useful as a QMK testbed, featuring support for a lot of the interesting features of QMK including audio, and a lot of spare pins broken out to headers for hacking away. + +Keyboard Maintaintainers: [Ethan Madden](https://github.com/jetpacktuxedo), [James Underwood](https://github.com/ju0) +Hardware Supported: Obelus +Hardware Availability: [C-Keys soldering workshops](https://ckeys.org/workshops/), [/u/MonkeyPlusPlus](https://www.reddit.com/user/monkeyplusplus) + +Make example for this keyboard (after setting up your build environment): + + make ckeys/obelus:default + +Or to make and flash: + + make ckeys/obelus:default:dfu + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) and [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + diff --git a/keyboards/ckeys/obelus/rules.mk b/keyboards/ckeys/obelus/rules.mk new file mode 100644 index 0000000000..d999b118cb --- /dev/null +++ b/keyboards/ckeys/obelus/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input cloc |