diff options
Diffstat (limited to 'keyboards/capsunlocked')
28 files changed, 1054 insertions, 2 deletions
diff --git a/keyboards/capsunlocked/cu24/config.h b/keyboards/capsunlocked/cu24/config.h new file mode 100644 index 0000000000..a2a4e727ff --- /dev/null +++ b/keyboards/capsunlocked/cu24/config.h @@ -0,0 +1,112 @@ +/* Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Yiancar/CapsUnlocked +#define PRODUCT CU24 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { E6, F5, B4, B6, C6, C7 } +#define MATRIX_COL_PINS { F0, F1, D0, D1 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +/* Backlight */ +#define BACKLIGHT_PIN B5 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 5 + +/* RGB Glow */ +#define RGB_DI_PIN F4 // The pin the LED strip is connected to +#define RGBLED_NUM 5 // Number of LEDs in your strip +#define RGBLIGHT_ANIMATIONS + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/capsunlocked/cu24/cu24.c b/keyboards/capsunlocked/cu24/cu24.c new file mode 100644 index 0000000000..0c976f076f --- /dev/null +++ b/keyboards/capsunlocked/cu24/cu24.c @@ -0,0 +1,16 @@ +/* Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "cu24.h" diff --git a/keyboards/capsunlocked/cu24/cu24.h b/keyboards/capsunlocked/cu24/cu24.h new file mode 100644 index 0000000000..8e3daa4758 --- /dev/null +++ b/keyboards/capsunlocked/cu24/cu24.h @@ -0,0 +1,57 @@ +/* Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define LAYOUT_grid( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23, \ + k30, k31, k32, k33, \ + k40, k41, k42, k43, \ + k50, k51, k52, k53 \ +) { \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 }, \ + { k20, k21, k22, k23 }, \ + { k30, k31, k32, k33 }, \ + { k40, k41, k42, k43 }, \ + { k50, k51, k52, k53 } \ +} + +#define LAYOUT_numpad( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23, \ + k30, k31, k32, \ + k40, k41, k42, k43, \ + k51, k52 \ +) { \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 }, \ + { k20, k21, k22, k23 }, \ + { k30, k31, k32, XXX }, \ + { k40, k41, k42, k43 }, \ + { XXX, k51, k52, XXX } \ +} diff --git a/keyboards/capsunlocked/cu24/info.json b/keyboards/capsunlocked/cu24/info.json new file mode 100644 index 0000000000..532bc13bee --- /dev/null +++ b/keyboards/capsunlocked/cu24/info.json @@ -0,0 +1,14 @@ +{ + "keyboard_name": "cu24", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT_grid": { + "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"x":3, "y":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"Enter", "x":3, "y":3}, {"label":"0", "x":0, "y":4}, {"x":1, "y":4}, {"label":".", "x":2, "y":4}, {"x":3, "y":4}, {"x":0, "y":5}, {"x":1, "y":5}, {"x":2, "y":5}, {"x":3, "y":5}] + }, + + "LAYOUT_numpad": { + "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"x":3, "y":2, "h":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"0", "x":0, "y":4}, {"x":1, "y":4}, {"label":".", "x":2, "y":4}, {"x":3, "y":4, "h":2}, {"x":0, "y":5, "w":2}, {"x":2, "y":5}] + } + } +} diff --git a/keyboards/capsunlocked/cu24/keymaps/default/keymap.c b/keyboards/capsunlocked/cu24/keymaps/default/keymap.c new file mode 100644 index 0000000000..aa2d834dfa --- /dev/null +++ b/keyboards/capsunlocked/cu24/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_grid( /* Base */ + KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, + MO(1) , KC_PSLS, KC_PAST, KC_PMNS, + KC_P7 , KC_P8 , KC_P9 , KC_PPLS, + KC_P4 , KC_P5 , KC_P6 , KC_PPLS, + KC_P1 , KC_P2 , KC_P3 , KC_PENT, + KC_P0 , KC_P0 , KC_PDOT, KC_PENT +), + +[1] = LAYOUT_grid( /* FN */ + RGB_TOG, RGB_MOD, BL_STEP, BL_BRTG, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, + RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RESET , KC_TRNS +), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} diff --git a/keyboards/capsunlocked/cu24/keymaps/default/readme.md b/keyboards/capsunlocked/cu24/keymaps/default/readme.md new file mode 100644 index 0000000000..5528d6c0d8 --- /dev/null +++ b/keyboards/capsunlocked/cu24/keymaps/default/readme.md @@ -0,0 +1,10 @@ +https://imgur.com/a/vpHFj + + + +# Default CU24 Layout + +This is the default layout that comes flashed on every CU24. It is like a normal numpad, +with all the led customization on the Fn layer. + +See [All Layouts](https://imgur.com/trwO7dN) for all supported configurations!
\ No newline at end of file diff --git a/keyboards/capsunlocked/cu24/readme.md b/keyboards/capsunlocked/cu24/readme.md new file mode 100644 index 0000000000..250ff8847f --- /dev/null +++ b/keyboards/capsunlocked/cu24/readme.md @@ -0,0 +1,15 @@ +# CU24 + + + +A luxurious 24 key keypad with various layouts. Includes RGB underglow, backlight and an aluminium, brass and nylon case. + +Keyboard Maintainer: [Yiancar](https://github.com/yiancar) +Hardware Supported: PCB v1.0 (uses a 32u4) +Hardware Availability: [caps-unlocked.com](http://caps-unlocked.com/) + +Make example for this keyboard (after setting up your build environment): + + make capsunlocked/cu24:default + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/capsunlocked/cu24/rules.mk b/keyboards/capsunlocked/cu24/rules.mk new file mode 100644 index 0000000000..87e6fffce0 --- /dev/null +++ b/keyboards/capsunlocked/cu24/rules.mk @@ -0,0 +1,18 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Enable N-Key Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output +RGBLIGHT_ENABLE = yes # RGB drivers diff --git a/keyboards/capsunlocked/cu75/config.h b/keyboards/capsunlocked/cu75/config.h new file mode 100644 index 0000000000..cfcb08cce1 --- /dev/null +++ b/keyboards/capsunlocked/cu75/config.h @@ -0,0 +1,94 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6062 +#define DEVICE_VER 0x0001 +#define MANUFACTURER LFKeyboards/CapsUnlocked +#define PRODUCT CU75 + +#define DIODE_DIRECTION COL2ROW +#define MATRIX_ROWS 6 +#define MATRIX_COLS 16 +#define MATRIX_ROW_PINS {F1, B7, B3, D2, D3, B2} +#define MATRIX_COL_PINS {F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, B1, B0, F0} +#define UNUSED_PINS {} + +#define RGB_DI_PIN C7 // Have to set it to something to get the ws2812 code to compile +#define RGBLED_NUM 24 // Number of LEDs +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 8 +#define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/capsunlocked/cu75/cu75.c b/keyboards/capsunlocked/cu75/cu75.c new file mode 100644 index 0000000000..e52edd90fa --- /dev/null +++ b/keyboards/capsunlocked/cu75/cu75.c @@ -0,0 +1,116 @@ +#include <avr/sfr_defs.h> +#include <avr/timer_avr.h> +#include <avr/wdt.h> +#include "cu75.h" +#include "keymap.h" +#include "debug.h" +#include "../lfkeyboards/issi.h" +#include "../lfkeyboards/TWIlib.h" +#include "../lfkeyboards/lighting.h" + +#ifdef AUDIO_ENABLE +float test_sound[][2] = SONG(STARTUP_SOUND); +#include "audio.h" +#endif + +uint16_t click_hz = CLICK_HZ; +uint16_t click_time = CLICK_MS; +uint8_t click_toggle = CLICK_ENABLED; + + +void matrix_init_kb(void) +{ + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + +#ifdef AUDIO_ENABLE + audio_init(); + PLAY_SONG(test_sound); + // Fix port B5 + setPinInput(B5); + writePinHigh(B5); +#else + // If we're not using the audio pin, drive it low + setPinOutput(C6); + writePinLow(C6); +#endif +#ifdef ISSI_ENABLE + issi_init(); +#endif +} + +void matrix_scan_kb(void) +{ +#ifdef WATCHDOG_ENABLE + wdt_reset(); +#endif +#ifdef ISSI_ENABLE + // switch/underglow lighting update + static uint32_t issi_device = 0; + static uint32_t twi_last_ready = 0; + if(twi_last_ready > 1000){ + // Its been way too long since the last ISSI update, reset the I2C bus and start again + dprintf("TWI failed to recover, TWI re-init\n"); + twi_last_ready = 0; + TWIInit(); + force_issi_refresh(); + } + if(isTWIReady()){ + twi_last_ready = 0; + // If the i2c bus is available, kick off the issi update, alternate between devices + update_issi(issi_device, issi_device); + if(issi_device){ + issi_device = 0; + }else{ + issi_device = 3; + } + }else{ + twi_last_ready++; + } +#endif + matrix_scan_user(); +} + +void click(uint16_t freq, uint16_t duration){ +#ifdef AUDIO_ENABLE + if(freq >= 100 && freq <= 20000 && duration < 100){ + play_note(freq, 10); + for (uint16_t i = 0; i < duration; i++){ + _delay_ms(1); + } + stop_all_notes(); + } +#endif +} + +bool process_record_kb(uint16_t keycode, keyrecord_t* record) +{ + // Test code that turns on the switch led for the key that is pressed + // set_backlight_by_keymap(record->event.key.col, record->event.key.row); + if (click_toggle && record->event.pressed){ + click(click_hz, click_time); + } + if (keycode == RESET) { + reset_keyboard_kb(); + } else { + } + return process_record_user(keycode, record); +} + +void reset_keyboard_kb(){ +#ifdef WATCHDOG_ENABLE + MCUSR = 0; + wdt_disable(); + wdt_reset(); +#endif + reset_keyboard(); +} + +// LFK lighting info +const uint8_t switch_matrices[] = {0, 1}; +const uint8_t rgb_matrices[] = {6, 7}; +const uint8_t rgb_sequence[] = { + 24, 23, 22, 21, 20, 19, 18, 17, 1, 2, 3, 4, 5, + 6, 7, 8, 10, 11, 12, 13, 14, 15, 16, 9 +}; diff --git a/keyboards/capsunlocked/cu75/cu75.h b/keyboards/capsunlocked/cu75/cu75.h new file mode 100644 index 0000000000..11a01b8b7e --- /dev/null +++ b/keyboards/capsunlocked/cu75/cu75.h @@ -0,0 +1,96 @@ +#pragma once + +#include "quantum.h" +#include "matrix.h" +#include <avr/sfr_defs.h> + +typedef struct RGB_Color { + uint16_t red; + uint16_t green; + uint16_t blue; +} RGB_Color; + +typedef struct Layer_Info { + uint32_t layer; + uint32_t mask; + RGB_Color color; +} Layer_Info; + +extern const uint32_t layer_count; +extern const Layer_Info layer_info[]; + +#define CLICK_HZ 500 +#define CLICK_MS 2 +#define CLICK_ENABLED 0 + +void reset_keyboard_kb(void); +void click(uint16_t freq, uint16_t duration); + +#define XXX KC_NO + +/* Vanilla Keymap */ +// This a shortcut to help you visually see your layout. +/* +* ,-------------------------------------------------------------------------------. +* | 00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 0B | 0C | 0D | 0E | 0F | +* |-------------------------------------------------------------------------------| +* | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A | 1B | 1C | 1D | 1F | +* |-------------------------------------------------------------------------------| +* | 20 | 21 |22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | 2C | 2D | 2E | +* |-------------------------------------------------------------------------------| +* | 30 | 31 |32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 3B | 3C | 3E | +* |-------------------------------------------------------------------------------| +* | 40 | 42 |43 | 44 | 45 | 46 | 47 | 48 | 49 | 4A | 4B | 4C | 4D | 4E | +* |-------------------------------------------------------------------------------| +* | 50 | 51 | 52 | 53 | 56 | 58 | 59 | 5A | 5B | 5C | 5D | 5E | +* `-------------------------------------------------------------------------------' +*/ +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3E, \ + k40, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, \ + k50, k51, k52, k53, k56, k58, k59, k5A, k5B, k5C, k5D, k5E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, XXX, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, XXX, k3E, XXX }, \ + { k40, XXX, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, XXX }, \ + { k50, k51, k52, k53, XXX, XXX, k56, XXX, k58, k59, k5A, k5B, k5C, k5D, k5E, XXX } \ +} + +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, \ + k50, k51, k52, k53, k56, k58, k59, k5A, k5B, k5C, k5D, k5E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, XXX }, \ + { k50, k51, k52, k53, XXX, XXX, k56, XXX, k58, k59, k5A, k5B, k5C, k5D, k5E, XXX } \ +} + +#define LAYOUT_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3E, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, \ + k50, k51, k52, k53, k56, k58, k59, k5A, k5B, k5C, k5D, k5E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, XXX, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, XXX, k3E, XXX }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, XXX }, \ + { k50, k51, k52, k53, XXX, XXX, k56, XXX, k58, k59, k5A, k5B, k5C, k5D, k5E, XXX } \ +} diff --git a/keyboards/capsunlocked/cu75/info.json b/keyboards/capsunlocked/cu75/info.json new file mode 100644 index 0000000000..07812ddb58 --- /dev/null +++ b/keyboards/capsunlocked/cu75/info.json @@ -0,0 +1,18 @@ +{ + "keyboard_name": "cu75", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":2.75}, {"x":6.5, "y":5}, {"x":7.5, "y":5, "w":2.5}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}] + }, + + "LAYOUT_all": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"x":12.75, "y":3}, {"label":"Enter", "x":13.75, "y":3, "w":1.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":2.75}, {"x":6.5, "y":5}, {"x":7.5, "y":5, "w":2.5}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}] + }, + + "LAYOUT_iso": { + "layout": [{"label":"k01", "x":0, "y":0}, {"label":"k02", "x":1, "y":0}, {"label":"k03", "x":2, "y":0}, {"label":"k04", "x":3, "y":0}, {"label":"k05", "x":4, "y":0}, {"label":"k06", "x":5, "y":0}, {"label":"k07", "x":6, "y":0}, {"label":"k08", "x":7, "y":0}, {"label":"k09", "x":8, "y":0}, {"label":"k0A", "x":9, "y":0}, {"label":"k0B", "x":10, "y":0}, {"label":"k0C", "x":11, "y":0}, {"label":"k0D", "x":12, "y":0}, {"label":"k0E", "x":13, "y":0}, {"label":"k0F", "x":14, "y":0}, {"label":"k0G", "x":15, "y":0}, {"label":"k11", "x":0, "y":1}, {"label":"k12", "x":1, "y":1}, {"label":"k13", "x":2, "y":1}, {"label":"k14", "x":3, "y":1}, {"label":"k15", "x":4, "y":1}, {"label":"k16", "x":5, "y":1}, {"label":"k17", "x":6, "y":1}, {"label":"k18", "x":7, "y":1}, {"label":"k19", "x":8, "y":1}, {"label":"k1A", "x":9, "y":1}, {"label":"k1B", "x":10, "y":1}, {"label":"k1C", "x":11, "y":1}, {"label":"k1D", "x":12, "y":1}, {"label":"k1E", "x":13, "y":1, "w":2}, {"label": |