1 files changed, 100 insertions, 188 deletions

diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction75.c b/keyboards/cannonkeys/satisfaction75/satisfaction75.c
index 12d3660dae..0fe09c384f 100644
--- a/keyboards/cannonkeys/satisfaction75/satisfaction75.c
+++ b/keyboards/cannonkeys/satisfaction75/satisfaction75.c
@@ -15,11 +15,7 @@
 #include "raw_hid.h"
 #include "dynamic_keymap.h"
 #include "tmk_core/common/eeprom.h"
-
-// HACK
-#include "keyboards/wilba_tech/via_api.h" // Temporary hack
-#include "keyboards/wilba_tech/via_keycodes.h" // Temporary hack
-
+#include "version.h" // for QMK_BUILDDATE used in EEPROM magic
 
 /* Artificial delay added to get media keys to work in the encoder*/
 #define MEDIA_KEY_DELAY 10
@@ -58,56 +54,20 @@ backlight_config_t kb_backlight_config = {
   .level = BACKLIGHT_LEVELS
 };
 
-bool eeprom_is_valid(void)
-{
-	return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC &&
-			eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION);
-}
-
-void eeprom_set_valid(bool valid)
+#ifdef VIA_ENABLE
+void raw_hid_receive_kb( uint8_t *data, uint8_t length )
 {
-	eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF);
-	eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
-}
-
-void eeprom_reset(void)
-{
-	// Set the VIA specific EEPROM state as invalid.
-	eeprom_set_valid(false);
-	// Set the TMK/QMK EEPROM state as invalid.
-	eeconfig_disable();
-}
-
-#ifdef RAW_ENABLE
-
-void raw_hid_receive( uint8_t *data, uint8_t length )
-{
-	uint8_t *command_id = &(data[0]);
-	uint8_t *command_data = &(data[1]);
-	switch ( *command_id )
-	{
-		case id_get_protocol_version:
-		{
-			command_data[0] = PROTOCOL_VERSION >> 8;
-			command_data[1] = PROTOCOL_VERSION & 0xFF;
-			break;
-		}
-		case id_get_keyboard_value:
-		{
+  uint8_t *command_id = &(data[0]);
+  uint8_t *command_data = &(data[1]);
+  switch ( *command_id )
+  {
+    case id_get_keyboard_value:
+    {
             switch( command_data[0])
             {
-                case id_uptime:
-                {
-                uint32_t value = timer_read32();
-                command_data[1] = (value >> 24 ) & 0xFF;
-                command_data[2] = (value >> 16 ) & 0xFF;
-                command_data[3] = (value >> 8 ) & 0xFF;
-                command_data[4] = value & 0xFF;
-                break;
-                }
                 case id_oled_default_mode:
                 {
-                    uint8_t default_oled = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED);
+                    uint8_t default_oled = eeprom_read_byte((uint8_t*)EEPROM_DEFAULT_OLED);
                     command_data[1] = default_oled;
                     break;
                 }
@@ -141,15 +101,14 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
                     break;
                 }
             }
-			break;
+      break;
     }
-#ifdef DYNAMIC_KEYMAP_ENABLE
     case id_set_keyboard_value:
     {
       switch(command_data[0]){
         case id_oled_default_mode:
         {
-          eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED, command_data[1]);
+          eeprom_update_byte((uint8_t*)EEPROM_DEFAULT_OLED, command_data[1]);
           break;
         }
         case id_oled_mode:
@@ -161,7 +120,7 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
         case id_encoder_modes:
         {
           enabled_encoder_modes = command_data[1];
-          eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES, enabled_encoder_modes);
+          eeprom_update_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES, enabled_encoder_modes);
           break;
         }
         case id_encoder_custom:
@@ -180,95 +139,15 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
       }
       break;
     }
-		case id_dynamic_keymap_get_keycode:
-		{
-			uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] );
-			command_data[3] = keycode >> 8;
-			command_data[4] = keycode & 0xFF;
-			break;
-		}
-		case id_dynamic_keymap_set_keycode:
-		{
-			dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] );
-			break;
-		}
-		case id_dynamic_keymap_reset:
-		{
-			dynamic_keymap_reset();
-			break;
-		}
-		case id_dynamic_keymap_macro_get_count:
-		{
-			command_data[0] = dynamic_keymap_macro_get_count();
-			break;
-		}
-		case id_dynamic_keymap_macro_get_buffer_size:
-		{
-			uint16_t size = dynamic_keymap_macro_get_buffer_size();
-			command_data[0] = size >> 8;
-			command_data[1] = size & 0xFF;
-			break;
-		}
-		case id_dynamic_keymap_macro_get_buffer:
-		{
-			uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-			uint16_t size = command_data[2]; // size <= 28
-			dynamic_keymap_macro_set_buffer( offset, size, &command_data[3] );
-			break;
-		}
-		case id_dynamic_keymap_macro_reset:
-		{
-			dynamic_keymap_macro_reset();
-			break;
-		}
-		case id_dynamic_keymap_get_layer_count:
-		{
-			command_data[0] = dynamic_keymap_get_layer_count();
-			break;
-		}
-		case id_dynamic_keymap_get_buffer:
-		{
-			uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-			uint16_t size = command_data[2]; // size <= 28
-			dynamic_keymap_get_buffer( offset, size, &command_data[3] );
-			break;
-		}
-		case id_dynamic_keymap_set_buffer:
-		{
-			uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-			uint16_t size = command_data[2]; // size <= 28
-			dynamic_keymap_set_buffer( offset, size, &command_data[3] );
-			break;
-		}
-#endif // DYNAMIC_KEYMAP_ENABLE
-		case id_eeprom_reset:
-		{
-			eeprom_reset();
-			break;
-		}
-		case id_bootloader_jump:
-		{
-			// Need to send data back before the jump
-			// Informs host that the command is handled
-			raw_hid_send( data, length );
-			// Give host time to read it
-			wait_ms(100);
-			bootloader_jump();
-			break;
-		}
-		default:
-		{
-			// Unhandled message.
-			*command_id = id_unhandled;
-			break;
-		}
-	}
-
-	// Return same buffer with values changed
-	raw_hid_send( data, length );
-
+    default:
+    {
+      // Unhandled message.
+      *command_id = id_unhandled;
+      break;
+    }
+  }
+  // DO NOT call raw_hid_send(data,length) here, let caller do this
 }
-
 #endif
 
 
@@ -349,18 +228,6 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
       break;
   }
 
-#ifdef DYNAMIC_KEYMAP_ENABLE
-	// Handle macros
-	if (record->event.pressed) {
-		if ( keycode >= MACRO00 && keycode <= MACRO15 )
-		{
-			uint8_t id = keycode - MACRO00;
-			dynamic_keymap_macro_send(id);
-			return false;
-		}
-	}
-#endif //DYNAMIC_KEYMAP_ENABLE
-
   return process_record_user(keycode, record);
 }
 
@@ -392,59 +259,56 @@ void encoder_update_kb(uint8_t index, bool clockwise) {
   }
 }
 
-void dynamic_keymap_custom_reset(void){
-  void *p = (void*)(DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT);
-	void *end = (void*)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR);
-	while ( p != end ) {
-		eeprom_update_byte(p, 0);
-		++p;
-	}
-  eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES, 0x1F);
+void custom_config_reset(void){
+  void *p = (void*)(VIA_EEPROM_CUSTOM_CONFIG_ADDR);
+  void *end = (void*)(VIA_EEPROM_CUSTOM_CONFIG_ADDR+VIA_EEPROM_CUSTOM_CONFIG_SIZE);
+  while ( p != end ) {
+    eeprom_update_byte(p, 0);
+    ++p;
+  }
+  eeprom_update_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES, 0x1F);
 }
 
-void save_backlight_config_to_eeprom(){
-  eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT, kb_backlight_config.raw);
+void backlight_config_save(){
+  eeprom_update_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT, kb_backlight_config.raw);
 }
 
-void load_custom_config(){
-  kb_backlight_config.raw = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT);
+void custom_config_load(){
+  kb_backlight_config.raw = eeprom_read_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT);
 #ifdef DYNAMIC_KEYMAP_ENABLE
-  oled_mode = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED);
-  enabled_encoder_modes = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES);
+  oled_mode = eeprom_read_byte((uint8_t*)EEPROM_DEFAULT_OLED);
+  enabled_encoder_modes = eeprom_read_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES);
 #endif
 }
 
-void eeprom_init_kb(void)
+// Called from via_init() if VIA_ENABLE
+// Called from matrix_init_kb() if not VIA_ENABLE
+void via_init_kb(void)
 {
-	// If the EEPROM has the magic, the data is good.
-	// OK to load from EEPROM.
-	if (eeprom_is_valid()) {
-		load_custom_config();
-	} else	{
-		// If the EEPROM has not been saved before, or is out of date,
-		// save the default values to the EEPROM. Default values
-		// come from construction of the zeal_backlight_config instance.
-		//backlight_config_save();
+  // If the EEPROM has the magic, the data is good.
+  // OK to load from EEPROM.
+  if (via_eeprom_is_valid()) {
+    custom_config_load();
+  } else	{
 #ifdef DYNAMIC_KEYMAP_ENABLE
-		// This resets the keymaps in EEPROM to what is in flash.
-		dynamic_keymap_reset();
-		// This resets the macros in EEPROM to nothing.
-		dynamic_keymap_macro_reset();
     // Reset the custom stuff
-    dynamic_keymap_custom_reset();
+    custom_config_reset();
 #endif
-		// Save the magic number last, in case saving was interrupted
-		eeprom_set_valid(true);
-	}
+    // DO NOT set EEPROM valid here, let caller do this
+  }
 }
 
 void matrix_init_kb(void)
 {
-	eeprom_init_kb();
+#ifndef VIA_ENABLE
+  via_init_kb();
+  via_eeprom_set_valid(true);
+#endif // VIA_ENABLE
+
   rtcGetTime(&RTCD1, &last_timespec);
   queue_for_send = true;
   backlight_init_ports();
-	matrix_init_user();
+  matrix_init_user();
 }
 
 
@@ -472,3 +336,51 @@ void matrix_scan_kb(void) {
 #endif
 }
 
+//
+// In the case of VIA being disabled, we still need to check if
+// keyboard level EEPROM memory is valid before loading.
+// Thus these are copies of the same functions in VIA, since
+// the backlight settings reuse VIA's EEPROM magic/version,
+// and the ones in via.c won't be compiled in.
+//
+// Yes, this is sub-optimal, and is only here for completeness
+// (i.e. catering to the 1% of people that want wilba.tech LED bling
+// AND want persistent settings BUT DON'T want to use dynamic keymaps/VIA).
+//
+#ifndef VIA_ENABLE
+
+bool via_eeprom_is_valid(void)
+{
+    char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
+    uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3]  & 0x0F );
+    uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6]  & 0x0F );
+    uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9]  & 0x0F );
+
+    return (eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0 ) == magic0 &&
+            eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1 ) == magic1 &&
+            eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2 ) == magic2 );
+}
+
+// Sets VIA/keyboard level usage of EEPROM to valid/invalid
+// Keyboard level code (eg. via_init_kb()) should not call this
+void via_eeprom_set_valid(bool valid)
+{
+    char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
+    uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3]  & 0x0F );
+    uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6]  & 0x0F );
+    uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9]  & 0x0F );
+
+    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0, valid ? magic0 : 0xFF);
+    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1, valid ? magic1 : 0xFF);
+    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2, valid ? magic2 : 0xFF);
+}
+
+void via_eeprom_reset(void)
+{
+    // Set the VIA specific EEPROM state as invalid.
+    via_eeprom_set_valid(false);
+    // Set the TMK/QMK EEPROM state as invalid.
+    eeconfig_disable();
+}
+
+#endif // VIA_ENABLE
\ No newline at end of file