diff options
Diffstat (limited to 'keyboards/boardsource/technik_o/config.h')
| -rw-r--r-- | keyboards/boardsource/technik_o/config.h | 116 |
1 files changed, 2 insertions, 114 deletions
diff --git a/keyboards/boardsource/technik_o/config.h b/keyboards/boardsource/technik_o/config.h index 146141a911..bbaacd33c4 100644 --- a/keyboards/boardsource/technik_o/config.h +++ b/keyboards/boardsource/technik_o/config.h @@ -1,5 +1,5 @@ /* -Copyright 2020 Boardsource +Copyright 2022 Boardsource This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -16,62 +16,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x4273 -#define PRODUCT_ID 0x0079 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Boardsource -#define PRODUCT Technik-O - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS {B0, B1, B2, B3} -#define MATRIX_COL_PINS {B5, B6, B7, F5, C7, D0, D1, D2, D3, D4, D5, D6} -#define UNUSED_PINS - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -#define BACKLIGHT_BREATHING -#define RGBLIGHT_ANIMATIONS #define RGB_DI_PIN C6 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 -// RGB Matrix Animation modes. Explicitly enabled -// For full list of effects, see: -// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects -#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define DRIVER_LED_TOTAL 58 #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN #define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT #define ENABLE_RGB_MATRIX_BREATHING #define ENABLE_RGB_MATRIX_BAND_SAT -#define ENABLE_RGB_MATRIX_BAND_VAL #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL #define ENABLE_RGB_MATRIX_CYCLE_ALL #define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT #define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN #define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL #define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL #define ENABLE_RGB_MATRIX_CYCLE_SPIRAL #define ENABLE_RGB_MATRIX_DUAL_BEACON @@ -85,81 +42,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define ENABLE_RGB_MATRIX_PIXEL_RAIN #define ENABLE_RGB_MATRIX_PIXEL_FLOW #define ENABLE_RGB_MATRIX_PIXEL_FRACTAL -// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined #define ENABLE_RGB_MATRIX_TYPING_HEATMAP #define ENABLE_RGB_MATRIX_DIGITAL_RAIN -// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS #define ENABLE_RGB_MATRIX_SPLASH #define ENABLE_RGB_MATRIX_MULTISPLASH #define ENABLE_RGB_MATRIX_SOLID_SPLASH -#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -#ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 10 // Number of LEDs -#endif - -#define DRIVER_LED_TOTAL 58 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 |