8 files changed, 4 insertions, 99 deletions
diff --git a/keyboards/binepad/bn003/config.h b/keyboards/binepad/bn003/config.h
index 1c818b7459..1daeca6596 100644
--- a/keyboards/binepad/bn003/config.h
+++ b/keyboards/binepad/bn003/config.h
@@ -16,7 +16,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* Key matrix size */
 #define MATRIX_ROWS 1
@@ -28,54 +27,7 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
-
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
diff --git a/keyboards/binepad/bn003/info.json b/keyboards/binepad/bn003/info.json
index aeff56fb01..3dd85b2fe6 100644
--- a/keyboards/binepad/bn003/info.json
+++ b/keyboards/binepad/bn003/info.json
@@ -8,6 +8,8 @@
     "pid": "0x4287",
     "device_version": "0.0.1"
   },
+  "processor": "atmega32u4",
+  "bootloader": "atmel-dfu",
   "layouts": {
     "LAYOUT": {
       "layout": [
diff --git a/keyboards/binepad/bn003/rules.mk b/keyboards/binepad/bn003/rules.mk
index 73ac281e0b..5356b24d77 100644
--- a/keyboards/binepad/bn003/rules.mk
+++ b/keyboards/binepad/bn003/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/binepad/bn006/info.json b/keyboards/binepad/bn006/info.json
index c0147a564e..d7be1cfa3c 100755
--- a/keyboards/binepad/bn006/info.json
+++ b/keyboards/binepad/bn006/info.json
@@ -3,7 +3,6 @@
     "keyboard_name": "BN006",
     "maintainer": "Binepad",
     "bootloader": "stm32duino",
-    "debounce": 5,
     "diode_direction": "COL2ROW",
     "features": {
         "bootmagic": true,
diff --git a/keyboards/binepad/bn009/config.h b/keyboards/binepad/bn009/config.h
index 48c2fd984c..37800ef106 100644
--- a/keyboards/binepad/bn009/config.h
+++ b/keyboards/binepad/bn009/config.h
@@ -16,7 +16,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* Key matrix size */
 #define MATRIX_ROWS 3
@@ -28,43 +27,7 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
-
- */
-//#define FORCE_NKRO
-
diff --git a/keyboards/binepad/bn009/info.json b/keyboards/binepad/bn009/info.json
index 528cf57016..36e90dd10c 100644
--- a/keyboards/binepad/bn009/info.json
+++ b/keyboards/binepad/bn009/info.json
@@ -8,6 +8,8 @@
     "pid": "0x4295",
     "device_version": "0.0.1"
   },
+  "processor": "atmega32u4",
+  "bootloader": "atmel-dfu",
   "layouts": {
     "LAYOUT": {
       "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}]
diff --git a/keyboards/binepad/bn009/rules.mk b/keyboards/binepad/bn009/rules.mk
index 73ac281e0b..5356b24d77 100644
--- a/keyboards/binepad/bn009/rules.mk
+++ b/keyboards/binepad/bn009/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/binepad/bnr1/info.json b/keyboards/binepad/bnr1/info.json
index 880209f6f1..42067200cd 100755
--- a/keyboards/binepad/bnr1/info.json
+++ b/keyboards/binepad/bnr1/info.json
@@ -2,7 +2,6 @@
     "manufacturer": "Binepad",
     "keyboard_name": "BNR1",
     "maintainer": "Binpad",
-    "debounce": 5,
     "features": {
         "bootmagic": true,
         "command": false,