4 files changed, 0 insertions, 87 deletions
diff --git a/keyboards/bastardkb/scylla/v2/splinky_3/config.h b/keyboards/bastardkb/scylla/v2/splinky_3/config.h
deleted file mode 100644
index 56020397da..0000000000
--- a/keyboards/bastardkb/scylla/v2/splinky_3/config.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Key matrix configuration. */
-#define MATRIX_ROW_PINS \
-    { GP29, GP26, GP5, GP4, GP9 }
-#define MATRIX_COL_PINS \
-    { GP27, GP28, GP21, GP6, GP7, GP8 }
-
-/* Handedness. */
-#define MASTER_RIGHT
-
-// To use the handedness pin, resistors need to be installed on the adapter PCB.
-// If so, uncomment the following code, and undefine MASTER_RIGHT above.
-// #define SPLIT_HAND_PIN GP15
-// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
-
-/* serial.c configuration (for split keyboard). */
-#define SOFT_SERIAL_PIN GP1
-
-/* RGB settings. */
-#define RGB_DI_PIN GP0
-
-/* Reset. */
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U
diff --git a/keyboards/bastardkb/scylla/v2/splinky_3/info.json b/keyboards/bastardkb/scylla/v2/splinky_3/info.json
deleted file mode 100644
index e6bcc6ca2f..0000000000
--- a/keyboards/bastardkb/scylla/v2/splinky_3/info.json
+++ /dev/null
@@ -1,6 +0,0 @@
-{
-    "keyboard_name": "Scylla Splinky",
-    "usb": {
-        "device_version": "2.0.0"
-    }
-}
diff --git a/keyboards/bastardkb/scylla/v2/splinky_3/readme.md b/keyboards/bastardkb/scylla/v2/splinky_3/readme.md
deleted file mode 100644
index 662eb5825c..0000000000
--- a/keyboards/bastardkb/scylla/v2/splinky_3/readme.md
+++ /dev/null
@@ -1,5 +0,0 @@
-# Splinky controller
-
-The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
-
-See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).
diff --git a/keyboards/bastardkb/scylla/v2/splinky_3/rules.mk b/keyboards/bastardkb/scylla/v2/splinky_3/rules.mk
deleted file mode 100644
index 8dfc0256ab..0000000000
--- a/keyboards/bastardkb/scylla/v2/splinky_3/rules.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-# MCU name
-MCU = RP2040
-
-# Bootloader selection
-BOOTLOADER = rp2040
-
-# RP2040-specific options
-ALLOW_WARNINGS = yes
-PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
-AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_SUPPORTED = yes  # RGB matrix is supported and enabled by default
-RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by default
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
-RGB_MATRIX_DRIVER = WS2812
-
-SPLIT_KEYBOARD = yes
-
-SERIAL_DRIVER = vendor
-WS2812_DRIVER = vendor