1 files changed, 63 insertions, 0 deletions
diff --git a/keyboards/bastardkb/charybdis/4x6/v2/stemcell/config.h b/keyboards/bastardkb/charybdis/4x6/v2/stemcell/config.h
new file mode 100644
index 0000000000..b1b432c330
--- /dev/null
+++ b/keyboards/bastardkb/charybdis/4x6/v2/stemcell/config.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { F4, F7, C6, D4, B5 }
+#define MATRIX_COL_PINS \
+    { F6, F5, B6, D7, E6, B4 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define A0 PAL_LINE(GPIOA, 0)
+// #define SPLIT_HAND_PIN A0
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN D2
+
+/* RGB settings. */
+#define RGB_DI_PIN D3
+#define WS2812_PWM_DRIVER PWMD2
+#define WS2812_PWM_CHANNEL 4
+#define WS2812_PWM_PAL_MODE 1
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM7
+#define WS2812_DMA_CHANNEL 3
+
+/* CRC. */
+#define CRC8_USE_TABLE
+#define CRC8_OPTIMIZE_SPEED
+
+/* SPI config for pmw3360 sensor. */
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN B1
+#define SPI_SCK_PAL_MODE 5
+#define SPI_MOSI_PIN B2
+#define SPI_MOSI_PAL_MODE 5
+#define SPI_MISO_PIN B3
+#define SPI_MISO_PAL_MODE 5
+
+/* PMW3360 settings. */
+#define A1 PAL_LINE(GPIOA, 1)
+#define POINTING_DEVICE_CS_PIN A1
+#define PMW3360_CS_MODE 3
+#define PMW3360_CS_DIVISOR 64