diff options
Diffstat (limited to 'keyboards/at_at')
| -rw-r--r-- | keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.c | 179 | ||||
| -rw-r--r-- | keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.h | 26 | ||||
| -rw-r--r-- | keyboards/at_at/660m/chconf.h | 202 | ||||
| -rw-r--r-- | keyboards/at_at/660m/halconf.h | 265 |
4 files changed, 607 insertions, 65 deletions
diff --git a/keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.c index 9d10fbd754..7c09bd997c 100644 --- a/keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.c +++ b/keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.c @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -20,14 +20,76 @@ */ #include "hal.h" +#include "stm32_gpio.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/** + * @brief Type of STM32 GPIO port setup. + */ +typedef struct { + uint32_t moder; + uint32_t otyper; + uint32_t ospeedr; + uint32_t pupdr; + uint32_t odr; + uint32_t afrl; + uint32_t afrh; +} gpio_setup_t; + +/** + * @brief Type of STM32 GPIO initialization data. + */ +typedef struct { +#if STM32_HAS_GPIOA || defined(__DOXYGEN__) + gpio_setup_t PAData; +#endif +#if STM32_HAS_GPIOB || defined(__DOXYGEN__) + gpio_setup_t PBData; +#endif +#if STM32_HAS_GPIOC || defined(__DOXYGEN__) + gpio_setup_t PCData; +#endif +#if STM32_HAS_GPIOD || defined(__DOXYGEN__) + gpio_setup_t PDData; +#endif +#if STM32_HAS_GPIOE || defined(__DOXYGEN__) + gpio_setup_t PEData; +#endif +#if STM32_HAS_GPIOF || defined(__DOXYGEN__) + gpio_setup_t PFData; +#endif +#if STM32_HAS_GPIOG || defined(__DOXYGEN__) + gpio_setup_t PGData; +#endif +#if STM32_HAS_GPIOH || defined(__DOXYGEN__) + gpio_setup_t PHData; +#endif +#if STM32_HAS_GPIOI || defined(__DOXYGEN__) + gpio_setup_t PIData; +#endif +#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) + gpio_setup_t PJData; +#endif +#if STM32_HAS_GPIOK || defined(__DOXYGEN__) + gpio_setup_t PKData; +#endif +} gpio_config_t; -#if HAL_USE_PAL || defined(__DOXYGEN__) /** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. + * @brief STM32 GPIO static initialization data. */ -const PALConfig pal_default_config = { +static const gpio_config_t gpio_default_config = { #if STM32_HAS_GPIOA {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, @@ -62,23 +124,118 @@ const PALConfig pal_default_config = { #endif #if STM32_HAS_GPIOI {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} + VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, +#endif +#if STM32_HAS_GPIOJ + {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, + VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, +#endif +#if STM32_HAS_GPIOK + {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, + VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} #endif }; + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { + + gpiop->OTYPER = config->otyper; + gpiop->OSPEEDR = config->ospeedr; + gpiop->PUPDR = config->pupdr; + gpiop->ODR = config->odr; + gpiop->AFRL = config->afrl; + gpiop->AFRH = config->afrh; + gpiop->MODER = config->moder; +} + +static void stm32_gpio_init(void) { + + /* Enabling GPIO-related clocks, the mask comes from the + registry header file.*/ + rccResetAHB(STM32_GPIO_EN_MASK); + rccEnableAHB(STM32_GPIO_EN_MASK, true); + + /* Initializing all the defined GPIO ports.*/ +#if STM32_HAS_GPIOA + gpio_init(GPIOA, &gpio_default_config.PAData); +#endif +#if STM32_HAS_GPIOB + gpio_init(GPIOB, &gpio_default_config.PBData); #endif +#if STM32_HAS_GPIOC + gpio_init(GPIOC, &gpio_default_config.PCData); +#endif +#if STM32_HAS_GPIOD + gpio_init(GPIOD, &gpio_default_config.PDData); +#endif +#if STM32_HAS_GPIOE + gpio_init(GPIOE, &gpio_default_config.PEData); +#endif +#if STM32_HAS_GPIOF + gpio_init(GPIOF, &gpio_default_config.PFData); +#endif +#if STM32_HAS_GPIOG + gpio_init(GPIOG, &gpio_default_config.PGData); +#endif +#if STM32_HAS_GPIOH + gpio_init(GPIOH, &gpio_default_config.PHData); +#endif +#if STM32_HAS_GPIOI + gpio_init(GPIOI, &gpio_default_config.PIData); +#endif +#if STM32_HAS_GPIOJ + gpio_init(GPIOJ, &gpio_default_config.PJData); +#endif +#if STM32_HAS_GPIOK + gpio_init(GPIOK, &gpio_default_config.PKData); +#endif +} + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ -void enter_bootloader_mode_if_requested(void); +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ /** * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. + * @details GPIO ports and system clocks are initialized before everything + * else. */ void __early_init(void) { + extern void enter_bootloader_mode_if_requested(void); enter_bootloader_mode_if_requested(); + stm32_gpio_init(); stm32_clock_init(); } +#if HAL_USE_SDC || defined(__DOXYGEN__) +/** + * @brief SDC card detection. + */ +bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief SDC card write protection detection. + */ +bool sdc_lld_is_write_protected(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif /* HAL_USE_SDC */ + #if HAL_USE_MMC_SPI || defined(__DOXYGEN__) /** * @brief MMC_SPI card detection. @@ -106,4 +263,6 @@ bool mmc_lld_is_write_protected(MMCDriver *mmcp) { * @todo Add your board-specific code, if any. */ void boardInit(void) { + SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP; + SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP); } diff --git a/keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.h index de3a93d1ce..57636d1f12 100644 --- a/keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.h +++ b/keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.h @@ -22,6 +22,10 @@ #ifndef BOARD_H #define BOARD_H +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + /* * Setup for ST STM32F072B-Discovery board. */ @@ -166,11 +170,9 @@ #define LINE_USB_DP PAL_LINE(GPIOA, 12U) #define LINE_SWDIO PAL_LINE(GPIOA, 13U) #define LINE_SWCLK PAL_LINE(GPIOA, 14U) - #define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U) #define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U) #define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U) - #define LINE_MEMS_CS PAL_LINE(GPIOC, 0U) #define LINE_LED_RED PAL_LINE(GPIOC, 6U) #define LINE_LED_BLUE PAL_LINE(GPIOC, 7U) @@ -178,11 +180,24 @@ #define LINE_LED_GREEN PAL_LINE(GPIOC, 9U) #define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) #define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) +#define LINE_OSC_IN PAL_LINE(GPIOF, 0U) +#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U) +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ -#define LINE_OSC_IN PAL_LINE(GPIOF, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U) +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ /* * I/O ports initial setup, this configuration is established soon after reset @@ -908,6 +923,9 @@ PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ PIN_AFIO_AF(GPIOF_PIN15, 0U)) +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ #if !defined(_FROM_ASM_) #ifdef __cplusplus diff --git a/keyboards/at_at/660m/chconf.h b/keyboards/at_at/660m/chconf.h index 89388dd5a3..4640ff5332 100644 --- a/keyboards/at_at/660m/chconf.h +++ b/keyboards/at_at/660m/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file templates/chconf.h + * @file rt/templates/chconf.h * @brief Configuration file template. * @details A copy of this file must be placed in each project directory, it * contains the application specific kernel settings. @@ -29,6 +29,7 @@ #define CHCONF_H #define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ /*===========================================================================*/ /** @@ -41,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -58,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 2 +#endif /** @} */ @@ -81,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ +#if !defined(CH_CFG_TIME_QUANTUM) #define CH_CFG_TIME_QUANTUM 0 +#endif /** * @brief Managed RAM size. @@ -94,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -103,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -122,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED FALSE +#endif /** @} */ @@ -140,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -148,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -157,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -165,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -176,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -184,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -194,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -204,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -214,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE +#endif /** * @brief Events Flags APIs. @@ -222,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -232,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -241,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -252,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -262,7 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -271,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE FALSE +#endif /** * @brief Heap Allocator APIs. @@ -283,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP FALSE +#endif /** * @brief Memory Pools Allocator APIs. @@ -292,7 +355,31 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS FALSE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS FALSE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES FALSE +#endif /** * @brief Dynamic Threads APIs. @@ -303,7 +390,80 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY FALSE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES FALSE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES FALSE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS FALSE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES FALSE +#endif /** @} */ @@ -319,7 +479,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -328,7 +490,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) #define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif /** * @brief Debug option, parameters checks. @@ -337,7 +501,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_CHECKS) #define CH_DBG_ENABLE_CHECKS FALSE +#endif /** * @brief Debug option, consistency checks. @@ -347,7 +513,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_ASSERTS) #define CH_DBG_ENABLE_ASSERTS FALSE +#endif /** * @brief Debug option, trace buffer. @@ -355,14 +523,18 @@ * * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ +#if !defined(CH_DBG_TRACE_MASK) #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif /** * @brief Trace buffer entries. * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is * different from @p CH_DBG_TRACE_MASK_DISABLED. */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) #define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -374,7 +546,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) #define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif /** * @brief Debug option, stacks initialization. @@ -384,7 +558,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_FILL_THREADS) #define CH_DBG_FILL_THREADS FALSE +#endif /** * @brief Debug option, threads profiling. @@ -395,7 +571,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -407,6 +585,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -415,9 +609,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ diff --git a/keyboards/at_at/660m/halconf.h b/keyboards/at_at/660m/halconf.h index 38743e0904..adb1a90715 100644 --- a/keyboards/at_at/660m/halconf.h +++ b/keyboards/at_at/660m/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,8 +25,11 @@ * @{ */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ #include "mcuconf.h" @@ -34,140 +37,181 @@ * @brief Enables the PAL subsystem. */ #if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE +#define HAL_USE_PAL TRUE #endif /** * @brief Enables the ADC subsystem. */ #if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE +#define HAL_USE_ADC FALSE #endif /** * @brief Enables the CAN subsystem. */ #if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE +#define HAL_USE_CAN FALSE #endif /** - * @brief Enables the DAC subsystem. + * @brief Enables the cryptographic subsystem. */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE #endif /** - * @brief Enables the EXT subsystem. + * @brief Enables the DAC subsystem. */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE #endif /** * @brief Enables the GPT subsystem. */ #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE +#define HAL_USE_GPT FALSE #endif /** * @brief Enables the I2C subsystem. */ #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE +#define HAL_USE_I2C TRUE #endif /** * @brief Enables the I2S subsystem. */ #if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE +#define HAL_USE_I2S FALSE #endif /** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE +#define HAL_USE_ICU FALSE #endif /** * @brief Enables the MAC subsystem. */ #if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE +#define HAL_USE_MAC FALSE #endif /** * @brief Enables the MMC_SPI subsystem. */ #if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE +#define HAL_USE_MMC_SPI FALSE #endif /** * @brief Enables the PWM subsystem. */ #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE +#define HAL_USE_PWM TRUE #endif /** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE +#define HAL_USE_RTC FALSE #endif /** * @brief Enables the SDC subsystem. */ #if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE +#define HAL_USE_SDC FALSE #endif /** * @brief Enables the SERIAL subsystem. */ #if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE +#define HAL_USE_SERIAL FALSE #endif /** * @brief Enables the SERIAL over USB subsystem. */ #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE #endif /** * @brief Enables the SPI subsystem. */ #if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE #endif /** * @brief Enables the UART subsystem. */ #if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE +#define HAL_USE_UART FALSE #endif /** * @brief Enables the USB subsystem. */ #if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE +#define HAL_USE_USB TRUE #endif /** * @brief Enables the WDG subsystem. */ #if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE #endif /*===========================================================================*/ @@ -179,7 +223,7 @@ * @note Disabling this option saves both code and data space. */ #if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE +#define ADC_USE_WAIT TRUE #endif /** @@ -187,7 +231,7 @@ * @note Disabling this option saves both code and data space. */ #if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE +#define ADC_USE_MUTUAL_EXCLUSION TRUE #endif /*===========================================================================*/ @@ -198,7 +242,56 @@ * @brief Sleep mode related APIs inclusion switch. */ #if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE #endif /*===========================================================================*/ @@ -209,7 +302,7 @@ * @brief Enables the mutual exclusion APIs on the I2C bus. */ #if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE +#define I2C_USE_MUTUAL_EXCLUSION TRUE #endif /*===========================================================================*/ @@ -217,17 +310,17 @@ /*===========================================================================*/ /** - * @brief Enables an event sources for incoming packets. + * @brief Enables t |