summaryrefslogtreecommitdiffstats
path: root/keyboards/amjpad
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/amjpad')
-rw-r--r--keyboards/amjpad/Makefile3
-rw-r--r--keyboards/amjpad/amjpad.c30
-rw-r--r--keyboards/amjpad/amjpad.h61
-rw-r--r--keyboards/amjpad/config.h94
-rw-r--r--keyboards/amjpad/keymaps/default/keymap.c101
-rw-r--r--keyboards/amjpad/keymaps/max/keymap.c102
-rw-r--r--keyboards/amjpad/keymaps/ortho_left/keymap.c65
-rw-r--r--keyboards/amjpad/keymaps/ortho_right/keymap.c65
-rw-r--r--keyboards/amjpad/rules.mk66
9 files changed, 587 insertions, 0 deletions
diff --git a/keyboards/amjpad/Makefile b/keyboards/amjpad/Makefile
new file mode 100644
index 0000000000..4e2a6f00fd
--- /dev/null
+++ b/keyboards/amjpad/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+ include ../../Makefile
+endif \ No newline at end of file
diff --git a/keyboards/amjpad/amjpad.c b/keyboards/amjpad/amjpad.c
new file mode 100644
index 0000000000..ac5991bd08
--- /dev/null
+++ b/keyboards/amjpad/amjpad.c
@@ -0,0 +1,30 @@
+#include "amjpad.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ matrix_init_user();
+ led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+ matrix_scan_user();
+};
+
+void led_init_ports(void) {
+ // * Set our LED pins as output
+ DDRD |= (1<<6);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+ // Turn numlock on
+ PORTD &= ~(1<<6);
+ } else {
+ // Turn numlock off
+ PORTD |= (1<<6);
+ }
+}
diff --git a/keyboards/amjpad/amjpad.h b/keyboards/amjpad/amjpad.h
new file mode 100644
index 0000000000..ffba1c9b94
--- /dev/null
+++ b/keyboards/amjpad/amjpad.h
@@ -0,0 +1,61 @@
+#ifndef AMJPAD_H
+#define ADMJPAD_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+/* AMJPAD matrix layout
+ * ,-------------------.
+ * | 00 | 01 | 02 | 03 |
+ * |----|----|----|----|
+ * | 10 | 11 | 12 | 13 |
+ * |----|----|----|----|
+ * | 20 | 21 | 22 | |
+ * |----|----|----| 23 |
+ * | 30 | 31 | 32 | |
+ * |----|----|----|----|
+ * | 40 | 41 | 42 | |
+ * |----|----|----| 43 |
+ * | 50 | 52 | |
+ * `-------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+ k00, k01, k02, k03, \
+ k10, k11, k12, k13, \
+ k20, k21, k22, k23, \
+ k30, k31, k32, \
+ k40, k41, k42, k43, \
+ k50, k52 \
+) \
+{ \
+ {k00, k01, k02, k03}, \
+ {k10, k11, k12, k13}, \
+ {k20, k21, k22, k23}, \
+ {k30, k31, k32, XXX}, \
+ {k40, k41, k42, k43}, \
+ {k50, XXX, k52, XXX} \
+}
+#define MAXKEYMAP( \
+ k00, k01, k02, k03, \
+ k10, k11, k12, k13, \
+ k20, k21, k22, k23, \
+ k30, k31, k32, k33, \
+ k40, k41, k42, k43, \
+ k50, k51, k52, k53\
+) \
+{ \
+ {k00, k01, k02, k03}, \
+ {k10, k11, k12, k13}, \
+ {k20, k21, k22, k23}, \
+ {k30, k31, k32, k33}, \
+ {k40, k41, k42, k43}, \
+ {k50, k51, k52, k53} \
+}
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
diff --git a/keyboards/amjpad/config.h b/keyboards/amjpad/config.h
new file mode 100644
index 0000000000..1a26d2ab6c
--- /dev/null
+++ b/keyboards/amjpad/config.h
@@ -0,0 +1,94 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0003
+#define MANUFACTURER AMJ
+#define PRODUCT PAD
+#define DESCRIPTION QMK keyboard firmware for AMJ PAD
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5, D0 }
+#define MATRIX_COL_PINS { F1, F0, E6, C7 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+/* Underlight configuration
+ */
+
+#define RGB_DI_PIN E2
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 8 // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/amjpad/keymaps/default/keymap.c b/keyboards/amjpad/keymaps/default/keymap.c
new file mode 100644
index 0000000000..362afd1079
--- /dev/null
+++ b/keyboards/amjpad/keymaps/default/keymap.c
@@ -0,0 +1,101 @@
+#include "amjpad.h"
+
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+#endif
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: (Base Layer) Default Layer
+ * ,-------------------.
+ * |Esc |TAB |BS | = |
+ * |----|----|----|----|
+ * | NL | / | * | - |
+ * |----|----|----|----|
+ * | 7 | 8 | 9 | |
+ * |----|----|----| + |
+ * | 4 | 5 | 6 | |
+ * |----|----|----|----|
+ * | 1 | 2 | 3 | |
+ * |----|----|----| En |
+ * | 0 |./FN| |
+ * `-------------------'
+ */
+
+[_BL] = KEYMAP(
+ KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \
+ KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+ KC_P7, KC_P8, KC_P9, KC_PPLS, \
+ KC_P4, KC_P5, KC_P6, \
+ KC_P1, KC_P2, KC_P3, KC_PENT, \
+ KC_P0, LT(_FL,KC_PDOT)),
+
+ /* Keymap _FL: Function Layer
+ * ,-------------------.
+ * |Esc |TAB |BS | = |
+ * |----|----|----|----|
+ * | NL | / | * | - |
+ * |----|----|----|----|
+ * | 7 | 8 | 9 | |
+ * |----|----|----|RST |
+ * | 4 | 5 | 6 | |
+ * |----|----|----|----|
+ * | 1 | 2 | 3 | |
+ * |----|----|----| En |
+ * | 0 |./FN| |
+ * `-------------------'
+ */
+[_FL] = KEYMAP(
+
+ KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \
+ KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
+ KC_P7, KC_P8, KC_P9, RESET, \
+ KC_P4, KC_P5, KC_P6, \
+ KC_P1, KC_P2, KC_P3, KC_PENT, \
+ KC_P0, LT(_FL,KC_PDOT)),
+};
+
+enum function_id {
+ SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ static uint8_t shift_esc_shift_mask;
+ switch (id) {
+ case SHIFT_ESC:
+ shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+ if (record->event.pressed) {
+ if (shift_esc_shift_mask) {
+ add_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ add_key(KC_ESC);
+ send_keyboard_report();
+ }
+ } else {
+ if (shift_esc_shift_mask) {
+ del_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ del_key(KC_ESC);
+ send_keyboard_report();
+ }
+ }
+ break;
+ }
+}
diff --git a/keyboards/amjpad/keymaps/max/keymap.c b/keyboards/amjpad/keymaps/max/keymap.c
new file mode 100644
index 0000000000..926a494a90
--- /dev/null
+++ b/keyboards/amjpad/keymaps/max/keymap.c
@@ -0,0 +1,102 @@
+#include "amjpad.h"
+
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+#endif
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: (Base Layer) Default Layer
+ * ,-------------------.
+ * |Esc |Setp| - | = |
+ * |----|----|----|----|
+ * | F1 | F2 | F3 | F4 |
+ * |----|----|----|----|
+ * | 7 | 8 | 9 | - |
+ * |----|----|----|----|
+ * | 4 | 5 | 6 | LF |
+ * |----|----|----|----|
+ * | 1 | 2 | 3 | \ |
+ * |----|----|----|----|
+ * |Left|Down| Up |Rght|
+ * `-------------------'
+ */
+
+[_BL] = MAXKEYMAP(
+
+ KC_ESC, KC_TAB, KC_MINS,KC_EQL, \
+ KC_F1, KC_F2, KC_F3, KC_F4, \
+ KC_P7, KC_P8, KC_P9, KC_PMNS, \
+ KC_P4, KC_P5, KC_P6, KC_PENT, \
+ KC_P1, KC_P2, KC_P3, KC_BSLS, \
+ KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT),
+
+ /* Keymap _FL: Function Layer
+ * ,-------------------.
+ * |Esc |TAB |BS | = |
+ * |----|----|----|----|
+ * | NL | / | * | - |
+ * |----|----|----|----|
+ * | 7 | 8 | 9 | |
+ * |----|----|----|RST |
+ * | 4 | 5 | 6 | |
+ * |----|----|----|----|
+ * | 1 | 2 | 3 | |
+ * |----|----|----| En |
+ * | 0 |./FN| |
+ * `-------------------'
+ */
+[_FL] = MAXKEYMAP(
+
+ KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \
+ KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
+ KC_P7, KC_P8, KC_P9, RESET, \
+ KC_P4, KC_P5, KC_P6, KC_PENT, \
+ KC_P1, KC_P2, KC_P3, KC_PENT, \
+ KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT),
+};
+
+enum function_id {
+ SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ static uint8_t shift_esc_shift_mask;
+ switch (id) {
+ case SHIFT_ESC:
+ shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+ if (record->event.pressed) {
+ if (shift_esc_shift_mask) {
+ add_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ add_key(KC_ESC);
+ send_keyboard_report();
+ }
+ } else {
+ if (shift_esc_shift_mask) {
+ del_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ del_key(KC_ESC);
+ send_keyboard_report();
+ }
+ }
+ break;
+ }
+}
diff --git a/keyboards/amjpad/keymaps/ortho_left/keymap.c b/keyboards/amjpad/keymaps/ortho_left/keymap.c
new file mode 100644
index 0000000000..d3e4d9944b
--- /dev/null
+++ b/keyboards/amjpad/keymaps/ortho_left/keymap.c
@@ -0,0 +1,65 @@
+#include "amjpad.h"
+
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: (Base Layer) Default Layer
+ * ,-------------------.
+ * | T | G | B |Spac|
+ * |----|----|----|----|
+ * | R | F | V | Fn |
+ * |----|----|----|----|
+ * | E | D | C | OS |
+ * |----|----|----|----|
+ * | W | S | X | Alt|
+ * |----|----|----|----|
+ * | Q | A | Z | Ctl|
+ * |----|----|----|----|
+ * | Esc| Tab|Shft| Fn2|
+ * `-------------------'
+ */
+
+[_BL] = MAXKEYMAP(
+
+ KC_T, KC_G, KC_B, KC_SPACE,\
+ KC_R, KC_F, KC_V, MO(1), \
+ KC_E, KC_D, KC_C, KC_LGUI, \
+ KC_W, KC_S, KC_X, KC_LALT, \
+ KC_Q, KC_A, KC_Z, KC_LCTL, \
+ KC_TAB, KC_ESC, KC_LSHIFT, MO(1)),
+
+ /* Keymap _FL: Function Layer
+ * ,-------------------.
+ * | 5 | F5 | F11|Spac|
+ * |----|----|----|----|
+ * | 4 | F4 | F10| |
+ * |----|----|----|----|
+ * | 3 | F3 | F9 | OS |
+ * |----|----|----|----|
+ * | 2 | F2 | F8 | Alt|
+ * |----|----|----|----|
+ * | 1 | F1 | F7 | Ctl|
+ * |----|----|----|----|
+ * | ` | Del|Shft| |
+ * `-------------------'
+ */
+[_FL] = MAXKEYMAP(
+
+ KC_5, KC_F5, KC_F11, _______, \
+ KC_4, KC_F4, KC_F10, _______, \
+ KC_3, KC_F3, KC_F9, _______, \
+ KC_2, KC_F2, KC_F8, _______, \
+ KC_1, KC_F1, KC_F7, _______, \
+ KC_GRV,KC_DEL, _______, _______),
+};
diff --git a/keyboards/amjpad/keymaps/ortho_right/keymap.c b/keyboards/amjpad/keymaps/ortho_right/keymap.c
new file mode 100644
index 0000000000..33e599abdc
--- /dev/null
+++ b/keyboards/amjpad/keymaps/ortho_right/keymap.c
@@ -0,0 +1,65 @@
+#include "amjpad.h"
+
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: (Base Layer) Default Layer
+ * ,-------------------.
+ * |Spac| N | H | Y |
+ * |----|----|----|----|
+ * | Fn | M | J | U |
+ * |----|----|----|----|
+ * |Left| , | K | I |
+ * |----|----|----|----|
+ * |Down| . | L | O |
+ * |----|----|----|----|
+ * | Up | / | ; | P |
+ * |----|----|----|----|
+ * |Rght| Ret| " |Bspc|
+ * `-------------------'
+ */
+
+[_BL] = MAXKEYMAP(
+
+ KC_SPACE, KC_N, KC_H, KC_Y, \
+ MO(1), KC_M, KC_J, KC_U, \
+ KC_LEFT, KC_COMM, KC_K, KC_I, \
+ KC_DOWN, KC_DOT, KC_L, KC_O, \
+ KC_UP, KC_SLASH, KC_SCLN, KC_P, \
+ KC_RIGHT, KC_ENT, KC_QUOT, KC_BSPC),
+
+ /* Keymap _FL: Function Layer
+ * ,-------------------.
+ * |Esc | F12| F6 | 6 |
+ * |----|----|----|----|
+ * | NL | M | - | 7 |
+ * |----|----|----|----|
+ * |Left| , | = | 8 |
+ * |----|----|----|----|
+ * |Down| . | [ | 9 |
+ * |----|----|----|----|
+ * | Up | / | ] | 0 |
+ * |----|----|----|----|
+ * |Rght| Ret| \ | Del|
+ * `-------------------'
+ */
+[_FL] = MAXKEYMAP(
+
+ _______, KC_F12, KC_F6, KC_6, \
+ _______, _______, KC_MINS, KC_7, \
+ _______, _______, KC_EQL, KC_8, \
+ _______, _______, KC_LBRC, KC_9, \
+ _______, _______, KC_RBRC, KC_0, \
+ _______, _______, KC_BSLS, KC_DEL),
+};
diff --git a/keyboards/amjpad/rules.mk b/keyboards/amjpad/rules.mk
new file mode 100644
index 0000000000..dd5b2bbe0c
--- /dev/null
+++ b/keyboards/amjpad/rules.mk
@@ -0,0 +1,66 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 19:17:31 +0000