diff options
Diffstat (limited to 'keyboards/alps64')
| -rw-r--r-- | keyboards/alps64/Makefile | 70 | ||||
| -rw-r--r-- | keyboards/alps64/alps64.c | 30 | ||||
| -rw-r--r-- | keyboards/alps64/alps64.h | 40 | ||||
| -rw-r--r-- | keyboards/alps64/config.h | 75 | ||||
| -rw-r--r-- | keyboards/alps64/keymaps/default/keymap.c | 12 | ||||
| -rw-r--r-- | keyboards/alps64/led.c | 34 | ||||
| -rw-r--r-- | keyboards/alps64/matrix.c | 199 |
7 files changed, 460 insertions, 0 deletions
diff --git a/keyboards/alps64/Makefile b/keyboards/alps64/Makefile new file mode 100644 index 0000000000..d8325e6c89 --- /dev/null +++ b/keyboards/alps64/Makefile @@ -0,0 +1,70 @@ + + +# Target file name (without extension). + +# project specific files +SRC = led.c + +# MCU name +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + +ifndef QUANTUM_DIR + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/alps64/alps64.c b/keyboards/alps64/alps64.c new file mode 100644 index 0000000000..472d1d445c --- /dev/null +++ b/keyboards/alps64/alps64.c @@ -0,0 +1,30 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "quantum.h" + +#define LED_ON() do { DDRC |= (1<<5); PORTC |= (1<<5); } while (0) +#define LED_OFF() do { DDRC &= ~(1<<5); PORTC &= ~(1<<5); } while (0) +#define LED_TGL() do { DDRC |= (1<<5); PINC |= (1<<5); } while (0) + + +void matrix_init_kb(void) { + LED_ON(); + _delay_ms(500); + LED_OFF(); + + matrix_init_user(); +}
\ No newline at end of file diff --git a/keyboards/alps64/alps64.h b/keyboards/alps64/alps64.h new file mode 100644 index 0000000000..f265c3358e --- /dev/null +++ b/keyboards/alps64/alps64.h @@ -0,0 +1,40 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef ALPS64_H +#define ALPS64_H + +#include "quantum.h" + +/* Alps64 keymap definition macro */ +#define KEYMAP( \ + K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \ + K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \ + K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \ + K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \ + K30, K40, K50, K60, K70, K00, K10, K20 \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \ + { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ + { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \ + { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 } \ +} + +#endif diff --git a/keyboards/alps64/config.h b/keyboards/alps64/config.h new file mode 100644 index 0000000000..858a82ecdd --- /dev/null +++ b/keyboards/alps64/config.h @@ -0,0 +1,75 @@ +/* +Copyright 2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6464 +#define DEVICE_VER 0x0001 +#define MANUFACTURER TMK +#define PRODUCT Alps64 +#define DESCRIPTION TMK keyboard firmware for Alps64 + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + +#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5, D6, C2 } +#define UNUSED_PINS + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/alps64/keymaps/default/keymap.c b/keyboards/alps64/keymaps/default/keymap.c new file mode 100644 index 0000000000..2c45dc7f34 --- /dev/null +++ b/keyboards/alps64/keymaps/default/keymap.c @@ -0,0 +1,12 @@ +#include "alps64.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + KEYMAP( \ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ + CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \ + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT,ESC, \ + LCTL,LGUI,LALT, SPC, APP, RALT,RGUI,RCTL), +}; +const uint16_t PROGMEM fn_actions[] = {}; diff --git a/keyboards/alps64/led.c b/keyboards/alps64/led.c new file mode 100644 index 0000000000..d20c51aabe --- /dev/null +++ b/keyboards/alps64/led.c @@ -0,0 +1,34 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output high + DDRC |= (1<<5); + PORTC |= (1<<5); + } else { + // Hi-Z + DDRC &= ~(1<<5); + PORTC &= ~(1<<5); + } +} diff --git a/keyboards/alps64/matrix.c b/keyboards/alps64/matrix.c new file mode 100644 index 0000000000..b3508850de --- /dev/null +++ b/keyboards/alps64/matrix.c @@ -0,0 +1,199 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // initialize row and col + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + //debug + debug_matrix = true; + LED_ON(); + _delay_ms(500); + LED_OFF(); +} + +uint8_t matrix_scan(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i] != cols) { + matrix_debouncing[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + matrix_scan_quantum(); + + return 1; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +/* Column pin configuration + * col: 0 1 2 3 4 5 6 7 + * pin: B0 B1 B2 B3 B4 B5 B6 B7 + */ +static void init_cols(void) +{ + // Input with pull-up(DDR:0, PORT:1) + DDRB &= ~0b11111111; + PORTB |= 0b11111111; +} + +/* Returns status of switches(1:on, 0:off) */ +static matrix_row_t read_cols(void) +{ + // Invert because PIN indicates 'switch on' with low(0) and 'off' with high(1) + return ~PINB; +} + +/* Row pin configuration + * row: 0 1 2 3 4 5 6 7 + * pin: D0 D1 D2 D3 D4 D5 D6 C2 + */ +static void unselect_rows(void) +{ + // Hi-Z(DDR:0, PORT:0) to unselect + DDRD &= ~0b01111111; + PORTD &= ~0b01111111; + DDRC &= ~0b00000100; + PORTC &= ~0b00000100; +} + + +static void select_row(uint8_t row) +{ + // Output low(DDR:1, PORT:0) to select + switch (row) { + case 0: + DDRD |= (1<<0); + PORTD &= ~(1<<0); + break; + case 1: + DDRD |= (1<<1); + PORTD &= ~(1<<1); + break; + case 2: + DDRD |= (1<<2); + PORTD &= ~(1<<2); + break; + case 3: + DDRD |= (1<<3); + PORTD &= ~(1<<3); + break; + case 4: + DDRD |= (1<<4); + PORTD &= ~(1<<4); + break; + case 5: + DDRD |= (1<<5); + PORTD &= ~(1<<5); + break; + case 6: + DDRD |= (1<<6); + PORTD &= ~(1<<6); + break; + case 7: + DDRC |= (1<<2); + PORTC &= ~(1<<2); + break; + } +} |