1 files changed, 68 insertions, 0 deletions
diff --git a/keyboards/adpenrose/obi/config.h b/keyboards/adpenrose/obi/config.h
new file mode 100644
index 0000000000..c1c5ea9f30
--- /dev/null
+++ b/keyboards/adpenrose/obi/config.h
@@ -0,0 +1,68 @@
+// Copyright 2022 Arturo Avila (@ADPenrose)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F4, F5, C7, C6 }
+#define MATRIX_COL_PINS { F6, B7, B6, B4, B5, D6, D5, D3, D7, D4, D2, D1, D0, B0 }
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*Rotary encoder - set the resolution fitting your encoder.
+Most will need a value of 4. If 1 encoder click results in 2 keycodes sent
+increase the value. If you need 2 clicks for 1 keycode, decrease*/
+#define ENCODER_RESOLUTION 4
+#define ENCODERS_PAD_A { F1 }
+#define ENCODERS_PAD_B { F0 }
+#define TAP_CODE_DELAY 10
+
+/* Underglow options: */
+#define RGB_DI_PIN F7
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 16
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#    define RGBLIGHT_EFFECT_BREATHING
+#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#    define RGBLIGHT_EFFECT_SNAKE
+#    define RGBLIGHT_EFFECT_KNIGHT
+#    define RGBLIGHT_EFFECT_CHRISTMAS
+#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#    define RGBLIGHT_EFFECT_RGB_TEST
+#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+