summaryrefslogtreecommitdiffstats
path: root/keyboards/adafruit/macropad/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/adafruit/macropad/readme.md')
-rw-r--r--keyboards/adafruit/macropad/readme.md37
1 files changed, 37 insertions, 0 deletions
diff --git a/keyboards/adafruit/macropad/readme.md b/keyboards/adafruit/macropad/readme.md
new file mode 100644
index 0000000000..fe7375b336
--- /dev/null
+++ b/keyboards/adafruit/macropad/readme.md
@@ -0,0 +1,37 @@
+# Adafruit MacroPad RP2040
+
+![AdafruitMacropad](https://i.imgur.com/dSBSwcJh.jpeg)
+
+A RP2040-powered Macropad with a 3x4 layout.
+
+- Keyboard Maintainer: [Jpe230](https://github.com/jpe230/)
+- Hardware Supported: Adafruit MacroPad RP2040
+- Hardware Availability: [Barebones kit](https://www.adafruit.com/product/5100) [Starter Kit](https://www.adafruit.com/product/5128)
+
+Make example for this board (after setting up your build environment):
+
+```sh
+qmk compile -kb adafruit/macropad -km default
+```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Features
+
+- Raspberry Pi RP2040 Chip + 8MB Flash memory - Dual-core Cortex M0+ at ~130MHz with 264KB of RAM.
+- 3x4 Mechanical key switch sockets - accepts any Cherry MX-compatible switches. Individually tied to GPIO pins (not matrix wired)
+- One NeoPixel RGB LED per switch, on north side.
+- Rotary encoder, 20 detents per rotation, with push-switch on GPIO pin. Push switch is also used for entering bootloader mode when held down on power-up or reset.
+- 128x64 SH1106 Monochrome OLED display - On high-speed hardware SPI port for quick updates.
+- 8mm Speaker/Buzzer - With Class D amplifier and RC filter, can be used to make simple beeps and sounds effects. (Unsupported for now)
+- STEMMA QT Connector - Allows adding any I2C sensors/displays/devices with plug-and-play cables.
+- Reset button - On the side, for quick restarting, press it twice to enter bootloader.
+- Four M3 mounting bosses - Make custom enclosures easily.
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the rotary encoder push-button on power-up or reset.
+* **Physical reset button**: Press twice the button on the side while the board is connected.
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.