diff options
Diffstat (limited to 'keyboards/adafruit/macropad/readme.md')
| -rw-r--r-- | keyboards/adafruit/macropad/readme.md | 38 |
1 files changed, 0 insertions, 38 deletions
diff --git a/keyboards/adafruit/macropad/readme.md b/keyboards/adafruit/macropad/readme.md deleted file mode 100644 index 09c8657902..0000000000 --- a/keyboards/adafruit/macropad/readme.md +++ /dev/null @@ -1,38 +0,0 @@ -# Adafruit MacroPad RP2040 - - - -A RP2040-powered Macropad with a 3x4 layout. - -- Keyboard Maintainer: [Jpe230](https://github.com/jpe230/) -- Hardware Supported: Adafruit MacroPad RP2040 -- Hardware Availability: [Barebones kit](https://www.adafruit.com/product/5100) [Starter Kit](https://www.adafruit.com/product/5128) - -Make example for this board (after setting up your build environment): - -```sh -qmk compile -kb adafruit/macropad -km default -``` - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -## Features - -- Raspberry Pi RP2040 Chip + 8MB Flash memory - Dual-core Cortex M0+ at ~130MHz with 264KB of RAM. -- 3x4 Mechanical key switch sockets - accepts any Cherry MX-compatible switches. Individually tied to GPIO pins (not matrix wired) -- One NeoPixel RGB LED per switch, on north side. -- Rotary encoder, 20 detents per rotation, with push-switch on GPIO pin. Push switch is also used for entering bootloader mode when held down on power-up or reset. -- 128x64 SH1106 Monochrome OLED display - On high-speed hardware SPI port for quick updates. -- 8mm Speaker/Buzzer - With Class D amplifier and RC filter, can be used to make simple beeps and sounds effects. (Unsupported for now) -- STEMMA QT Connector - Allows adding any I2C sensors/displays/devices with plug-and-play cables. -- Reset button - On the side, for quick restarting, press it twice to enter bootloader. -- Four M3 mounting bosses - Make custom enclosures easily. - -## Bootloader - -Enter the bootloader in 4 ways: - -* **Bootmagic reset**: Hold down the key just bellow the rotary encoder push-button on power-up. -* **Physical reset button**: Press twice the button on the side while the board is connected. -* **BOOT button** Hold down the rotary encoder push-button on power-up or reset. -* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. |