6 files changed, 4 insertions, 54 deletions
diff --git a/keyboards/ada/ada1800mini/config.h b/keyboards/ada/ada1800mini/config.h
index 36dc47c124..2c4298c82c 100644
--- a/keyboards/ada/ada1800mini/config.h
+++ b/keyboards/ada/ada1800mini/config.h
@@ -16,7 +16,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
diff --git a/keyboards/ada/ada1800mini/info.json b/keyboards/ada/ada1800mini/info.json
index a7cf7986bd..e3f97c6706 100644
--- a/keyboards/ada/ada1800mini/info.json
+++ b/keyboards/ada/ada1800mini/info.json
@@ -8,6 +8,8 @@
         "pid": "0x1800",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/ada/ada1800mini/rules.mk b/keyboards/ada/ada1800mini/rules.mk
index de0a7a0629..7d5bd18e35 100644
--- a/keyboards/ada/ada1800mini/rules.mk
+++ b/keyboards/ada/ada1800mini/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/ada/infinity81/config.h b/keyboards/ada/infinity81/config.h
index e4cfa2c34e..f809090fcc 100644
--- a/keyboards/ada/infinity81/config.h
+++ b/keyboards/ada/infinity81/config.h
@@ -3,7 +3,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 6
@@ -32,10 +31,6 @@
 //#define LED_COMPOSE_PIN B3
 //#define LED_KANA_PIN B4
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN D0
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 107
@@ -56,43 +51,11 @@
 #define RGBLIGHT_EFFECT_TWINKLE
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -108,7 +71,3 @@
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/ada/infinity81/info.json b/keyboards/ada/infinity81/info.json
index b2d465fdf9..5c32cd0639 100644
--- a/keyboards/ada/infinity81/info.json
+++ b/keyboards/ada/infinity81/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0081",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/ada/infinity81/rules.mk b/keyboards/ada/infinity81/rules.mk
index 3ff392a61f..951dd07d6e 100644
--- a/keyboards/ada/infinity81/rules.mk
+++ b/keyboards/ada/infinity81/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #