6 files changed, 0 insertions, 151 deletions
diff --git a/keyboards/4pplet/yakiimo/rev_a/config.h b/keyboards/4pplet/yakiimo/rev_a/config.h
deleted file mode 100644
index 4200eb10c7..0000000000
--- a/keyboards/4pplet/yakiimo/rev_a/config.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
-Copyright 2022 Stefan Sundin "4pplet" <4pplet@protonmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-#define MATRIX_ROWS 12
-#define MATRIX_COLS 9
-
-#define MATRIX_COL_PINS { B0, A5, A4, A3, A2, A1, A0, C15, A8 }
-#define MATRIX_ROW_PINS { B10, B1, C13, C14, B14, B12, B9, B8, B5, B4, A15, B3 }
-#define DIODE_DIRECTION COL2ROW
-
-#define LED_CAPS_LOCK_PIN A6
-#define LED_SCROLL_LOCK_PIN A7
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
diff --git a/keyboards/4pplet/yakiimo/rev_a/info.json b/keyboards/4pplet/yakiimo/rev_a/info.json
deleted file mode 100644
index f4eeba747f..0000000000
--- a/keyboards/4pplet/yakiimo/rev_a/info.json
+++ /dev/null
@@ -1,16 +0,0 @@
-{
-    "keyboard_name": "Yakiimo Rev A",
-    "manufacturer": "4pplet",
-    "url": "https://github.com/4pplet/yakiimo-PCB",
-    "maintainer": "4pplet",
-    "usb": {
-        "vid": "0x4444",
-        "pid": "0x000A",
-        "device_version": "0.0.2"
-    },
-    "layouts": {
-        "LAYOUT_all": {
-            "layout": [{"label":"Esc", "x":2.75, "y":0}, {"label":"F1", "x":4.75, "y":0}, {"label":"F2", "x":5.75, "y":0}, {"label":"F3", "x":6.75, "y":0}, {"label":"F4", "x":7.75, "y":0}, {"label":"F5", "x":9.25, "y":0}, {"label":"F6", "x":10.25, "y":0}, {"label":"F7", "x":11.25, "y":0}, {"label":"F8", "x":12.25, "y":0}, {"label":"F9", "x":13.75, "y":0}, {"label":"F10", "x":14.75, "y":0}, {"label":"F11", "x":15.75, "y":0}, {"label":"F12", "x":16.75, "y":0}, {"label":"PrtSc", "x":18, "y":0}, {"label":"Scroll Lock", "x":19, "y":0}, {"label":"Pause", "x":20, "y":0}, {"label":"~", "x":2.75, "y":1.5}, {"label":"!", "x":3.75, "y":1.5}, {"label":"@", "x":4.75, "y":1.5}, {"label":"#", "x":5.75, "y":1.5}, {"label":"$", "x":6.75, "y":1.5}, {"label":"%", "x":7.75, "y":1.5}, {"label":"^", "x":8.75, "y":1.5}, {"label":"&", "x":9.75, "y":1.5}, {"label":"*", "x":10.75, "y":1.5}, {"label":"(", "x":11.75, "y":1.5}, {"label":")", "x":12.75, "y":1.5}, {"label":"_", "x":13.75, "y":1.5}, {"label":"+", "x":14.75, "y":1.5}, {"label":"|", "x":15.75, "y":1.5}, {"label":"~", "x":16.75, "y":1.5}, {"label":"Insert", "x":18, "y":1.5}, {"label":"Home", "x":19, "y":1.5}, {"label":"PgUp", "x":20, "y":1.5}, {"label":"Tab", "x":2.75, "y":2.5, "w":1.5}, {"label":"Q", "x":4.25, "y":2.5}, {"label":"W", "x":5.25, "y":2.5}, {"label":"E", "x":6.25, "y":2.5}, {"label":"R", "x":7.25, "y":2.5}, {"label":"T", "x":8.25, "y":2.5}, {"label":"Y", "x":9.25, "y":2.5}, {"label":"U", "x":10.25, "y":2.5}, {"label":"I", "x":11.25, "y":2.5}, {"label":"O", "x":12.25, "y":2.5}, {"label":"P", "x":13.25, "y":2.5}, {"label":"{", "x":14.25, "y":2.5}, {"label":"}", "x":15.25, "y":2.5}, {"label":"|", "x":16.25, "y":2.5, "w":1.5}, {"label":"Delete", "x":18, "y":2.5}, {"label":"End", "x":19, "y":2.5}, {"label":"PgDn", "x":20, "y":2.5}, {"label":"Caps Lock", "x":2.75, "y":3.5, "w":1.75}, {"label":"A", "x":4.5, "y":3.5}, {"label":"S", "x":5.5, "y":3.5}, {"label":"D", "x":6.5, "y":3.5}, {"label":"F", "x":7.5, "y":3.5}, {"label":"G", "x":8.5, "y":3.5}, {"label":"H", "x":9.5, "y":3.5}, {"label":"J", "x":10.5, "y":3.5}, {"label":"K", "x":11.5, "y":3.5}, {"label":"L", "x":12.5, "y":3.5}, {"label":":", "x":13.5, "y":3.5}, {"label":"\"", "x":14.5, "y":3.5}, {"label":"~", "x":15.5, "y":3.5}, {"label":"Enter", "x":16.5, "y":3.5, "w":1.25}, {"label":"Shift", "x":2.75, "y":4.5, "w":1.25}, {"label":"|", "x":4, "y":4.5}, {"label":"Z", "x":5, "y":4.5}, {"label":"X", "x":6, "y":4.5}, {"label":"C", "x":7, "y":4.5}, {"label":"V", "x":8, "y":4.5}, {"label":"B", "x":9, "y":4.5}, {"label":"N", "x":10, "y":4.5}, {"label":"M", "x":11, "y":4.5}, {"label":"<", "x":12, "y":4.5}, {"label":">", "x":13, "y":4.5}, {"label":"?", "x":14, "y":4.5}, {"label":"Shift", "x":15, "y":4.5, "w":1.75}, {"label":"Fn", "x":16.75, "y":4.5}, {"label":"\u2191", "x":19, "y":4.5}, {"label":"Ctrl", "x":2.75, "y":5.5, "w":1.5}, {"label":"Win", "x":4.25, "y":5.5}, {"label":"Alt", "x":5.25, "y":5.5, "w":1.5}, {"x":6.75, "y":5.5, "w":3}, {"x":9.75, "y":5.5}, {"x":10.75, "y":5.5, "w":3}, {"label":"AltGr", "x":13.75, "y":5.5, "w":1.5}, {"label":"Win", "x":15.25, "y":5.5}, {"label":"Ctrl", "x":16.25, "y":5.5, "w":1.5}, {"label":"\u2190", "x":18, "y":5.5}, {"label":"\u2193", "x":19, "y":5.5}, {"label":"\u2192", "x":20, "y":5.5}]
-        }
-    }
-}
diff --git a/keyboards/4pplet/yakiimo/rev_a/readme.md b/keyboards/4pplet/yakiimo/rev_a/readme.md
deleted file mode 100644
index 06fc9ab21b..0000000000
--- a/keyboards/4pplet/yakiimo/rev_a/readme.md
+++ /dev/null
@@ -1,19 +0,0 @@
-# Yakiimo Rev A
-
-* Keyboard Maintainer: [4pplet](https://github.com/4pplet)
-* Hardware Supported: Yakiimo Rev A
-
-If your PCB is of revision A1, use the "proto" code in the Yakiimo directory
-
-Make example for this keyboard (after setting up your build environment):
-
-    make 4pplet/yakiimo/rev_a:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-How to enter bootloader (DFU):
-* Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
-* Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.
-
-Alternative option if the firmware is already pre-flashed:
-* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.
diff --git a/keyboards/4pplet/yakiimo/rev_a/rev_a.c b/keyboards/4pplet/yakiimo/rev_a/rev_a.c
deleted file mode 100644
index f60dbbdf24..0000000000
--- a/keyboards/4pplet/yakiimo/rev_a/rev_a.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
-Copyright 2022 Stefan Sundin "4pplet" <4pplet@protonmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#include "rev_a.h"
diff --git a/keyboards/4pplet/yakiimo/rev_a/rev_a.h b/keyboards/4pplet/yakiimo/rev_a/rev_a.h
deleted file mode 100644
index cc3f9dee85..0000000000
--- a/keyboards/4pplet/yakiimo/rev_a/rev_a.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
-Copyright 2022 Stefan Sundin "4pplet" <4pplet@protonmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT_all( \
-    k00, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k18, k08, \
-    k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, k28, k38, \
-    k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k47, k48, k58, \
-    k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76,  \
-    k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k96, k98, \
-    ka0, ka1, kb1,      kb2, kb3, kb4,      kb5, ka6, kb6,      ka7, kb8, ka8 \
-) \
-{ \
-    {k00, k01, k02, k03, k04, k05, k06, k07, k08}, \
-    {KC_NO, k11, k12, k13, k14, k15, k16, KC_NO, k18}, \
-    {k20, k21, k22, k23, k24, k25, k26, k27, k28}, \
-    {k30, k31, k32, k33, k34, k35, k36, k37, k38}, \
-    {k40, k41, k42, k43, k44, k45, k46, k47, k48}, \
-    {k50, k51, k52, k53, k54, k55, k56, KC_NO, k58}, \
-    {k60, k61, k62, k63, k64, k65, k66, KC_NO, KC_NO}, \
-    {k70, k71, k72, k73, k74, k75, k76, KC_NO, KC_NO}, \
-    {k80, k81, k82, k83, k84, k85, k86, KC_NO, KC_NO}, \
-    {k90, k91, k92, k93, k94, k95, k96, KC_NO, k98},  \
-    {ka0, ka1, KC_NO, KC_NO, KC_NO, KC_NO, ka6, ka7, ka8}, \
-    {KC_NO, kb1, kb2, kb3, kb4, kb5, kb6, KC_NO, kb8} \
-}
diff --git a/keyboards/4pplet/yakiimo/rev_a/rules.mk b/keyboards/4pplet/yakiimo/rev_a/rules.mk
deleted file mode 100644
index 2f1c4fc78b..0000000000
--- a/keyboards/4pplet/yakiimo/rev_a/rules.mk
+++ /dev/null
@@ -1,22 +0,0 @@
-# MCU name
-MCU = STM32F411
-BOARD = GENERIC_STM32_F411XE
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
-# Enter lower-power sleep mode when on the ChibiOS idle thread
-OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE