diff options
Diffstat (limited to 'keyboards/4pplet/yakiimo/readme.md')
| -rw-r--r-- | keyboards/4pplet/yakiimo/readme.md | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/keyboards/4pplet/yakiimo/readme.md b/keyboards/4pplet/yakiimo/readme.md new file mode 100644 index 0000000000..bdd5b9c272 --- /dev/null +++ b/keyboards/4pplet/yakiimo/readme.md @@ -0,0 +1,17 @@ +# Yakiimo Rev A + +* Keyboard Maintainer: [4pplet](https://github.com/4pplet) +* Hardware Supported: Yakiimo Rev A + +Make example for this keyboard (after setting up your build environment): + + make 4pplet/yakiimo/rev_a:via:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +How to enter bootloader (DFU): +* Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware. +* Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it. + +Alternative option if the firmware is already pre-flashed: +* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default. |