summaryrefslogtreecommitdiffstats
path: root/keyboards/4pplet/perk60_iso/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/4pplet/perk60_iso/readme.md')
-rw-r--r--keyboards/4pplet/perk60_iso/readme.md17
1 files changed, 17 insertions, 0 deletions
diff --git a/keyboards/4pplet/perk60_iso/readme.md b/keyboards/4pplet/perk60_iso/readme.md
new file mode 100644
index 0000000000..d3390c0c00
--- /dev/null
+++ b/keyboards/4pplet/perk60_iso/readme.md
@@ -0,0 +1,17 @@
+# Perk60 ISO Rev A
+
+* Keyboard Maintainer: [4pplet](https://github.com/4pplet)
+* Hardware Supported: Perk60 ISO Rev A
+
+Make example for this keyboard (after setting up your build environment):
+
+ make 4pplet/perk60_iso/rev_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+How to enter bootloader (DFU):
+* Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
+* Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.
+
+Alternative option if the firmware is already pre-flashed:
+* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.