diff options
Diffstat (limited to 'keyboards/4pplet/eagle_viper_rep')
| -rw-r--r-- | keyboards/4pplet/eagle_viper_rep/keymaps/via/rules.mk | 1 | ||||
| -rw-r--r-- | keyboards/4pplet/eagle_viper_rep/readme.md | 19 | ||||
| -rw-r--r-- | keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h | 23 | ||||
| -rw-r--r-- | keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h | 25 | ||||
| -rw-r--r-- | keyboards/4pplet/eagle_viper_rep/rev_a/info.json | 82 | ||||
| -rw-r--r-- | keyboards/4pplet/eagle_viper_rep/rev_a/mcuconf.h | 34 | ||||
| -rw-r--r-- | keyboards/4pplet/eagle_viper_rep/rev_a/readme.md | 19 | ||||
| -rw-r--r-- | keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c | 108 | ||||
| -rw-r--r-- | keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h | 41 | ||||
| -rw-r--r-- | keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk | 25 |
10 files changed, 0 insertions, 377 deletions
diff --git a/keyboards/4pplet/eagle_viper_rep/keymaps/via/rules.mk b/keyboards/4pplet/eagle_viper_rep/keymaps/via/rules.mk deleted file mode 100644 index 1e5b99807c..0000000000 --- a/keyboards/4pplet/eagle_viper_rep/keymaps/via/rules.mk +++ /dev/null @@ -1 +0,0 @@ -VIA_ENABLE = yes diff --git a/keyboards/4pplet/eagle_viper_rep/readme.md b/keyboards/4pplet/eagle_viper_rep/readme.md deleted file mode 100644 index 76415fd6c0..0000000000 --- a/keyboards/4pplet/eagle_viper_rep/readme.md +++ /dev/null @@ -1,19 +0,0 @@ -# Viper/Eagle REP Rev A - -A alternative PCB for Viper and Eagle V2 and V3 - -* Keyboard Maintainer: [4pplet](https://github.com/4pplet) -* Hardware Supported: Viper/Eagle REP Rev A - -Make example for this keyboard (after setting up your build environment): - - make 4pplet/eagle_viper_rep/rev_a:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -How to enter bootloader (DFU): -* Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware. -* Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it. - -Alternative option if the firmware is already pre-flashed: -* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default. diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h b/keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h deleted file mode 100644 index 9e81d8c4a0..0000000000 --- a/keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#define CH_CFG_ST_FREQUENCY 10000 - -#define CH_CFG_ST_RESOLUTION 16 - -#include_next <chconf.h> diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h b/keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h deleted file mode 100644 index b0dad8d4a4..0000000000 --- a/keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#define HAL_USE_I2C FALSE - -#define HAL_USE_PWM TRUE - -#define HAL_USE_SPI TRUE - -#include_next <halconf.h> diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/info.json b/keyboards/4pplet/eagle_viper_rep/rev_a/info.json deleted file mode 100644 index 110e1cce92..0000000000 --- a/keyboards/4pplet/eagle_viper_rep/rev_a/info.json +++ /dev/null @@ -1,82 +0,0 @@ -{ - "keyboard_name": "Eagle Viper REP Rev A", - "manufacturer": "4pplet", - "url": "https://github.com/4pplet/eagle_viper_rep", - "maintainer": "4pplet", - "usb": { - "vid": "0x4444", - "pid": "0x0007", - "device_version": "0.0.1" - }, - "layouts": { - "LAYOUT_all": { - "layout": [ - { "label": "Esc", "x": 0, "y": 0 }, - { "label": "!", "x": 1, "y": 0 }, - { "label": "@", "x": 2, "y": 0 }, - { "label": "#", "x": 3, "y": 0 }, - { "label": "$", "x": 4, "y": 0 }, - { "label": "%", "x": 5, "y": 0 }, - { "label": "^", "x": 6, "y": 0 }, - { "label": "&", "x": 7, "y": 0 }, - { "label": "*", "x": 8, "y": 0 }, - { "label": "(", "x": 9, "y": 0 }, - { "label": ")", "x": 10, "y": 0 }, - { "label": "_", "x": 11, "y": 0 }, - { "label": "+", "x": 12, "y": 0 }, - { "label": "|", "x": 13, "y": 0 }, - { "label": "~", "x": 14, "y": 0 }, - { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, - { "label": "Q", "x": 1.5, "y": 1 }, - { "label": "W", "x": 2.5, "y": 1 }, - { "label": "E", "x": 3.5, "y": 1 }, - { "label": "R", "x": 4.5, "y": 1 }, - { "label": "T", "x": 5.5, "y": 1 }, - { "label": "Y", "x": 6.5, "y": 1 }, - { "label": "U", "x": 7.5, "y": 1 }, - { "label": "I", "x": 8.5, "y": 1 }, - { "label": "O", "x": 9.5, "y": 1 }, - { "label": "P", "x": 10.5, "y": 1 }, - { "label": "{", "x": 11.5, "y": 1 }, - { "label": "}", "x": 12.5, "y": 1 }, - { "label": "Backsp.", "x": 13.5, "y": 1, "w": 1.5 }, - { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, - { "label": "A", "x": 1.75, "y": 2 }, - { "label": "S", "x": 2.75, "y": 2 }, - { "label": "D", "x": 3.75, "y": 2 }, - { "label": "F", "x": 4.75, "y": 2 }, - { "label": "G", "x": 5.75, "y": 2 }, - { "label": "H", "x": 6.75, "y": 2 }, - { "label": "J", "x": 7.75, "y": 2 }, - { "label": "K", "x": 8.75, "y": 2 }, - { "label": "L", "x": 9.75, "y": 2 }, - { "label": ":", "x": 10.75, "y": 2 }, - { "label": "\"", "x": 11.75, "y": 2 }, - { "label": "~", "x": 12.75, "y": 2}, - { "label": "Enter", "x": 13.75, "y": 2, "w": 1.25 }, - { "label": "Shift", "x": 0, "y": 3, "w": 1.25 }, - { "label": "|", "x": 1.25, "y": 3 }, - { "label": "Z", "x": 2.25, "y": 3 }, - { "label": "X", "x": 3.25, "y": 3 }, - { "label": "C", "x": 4.25, "y": 3 }, - { "label": "V", "x": 5.25, "y": 3 }, - { "label": "B", "x": 6.25, "y": 3 }, - { "label": "N", "x": 7.25, "y": 3 }, - { "label": "M", "x": 8.25, "y": 3 }, - { "label": "<", "x": 9.25, "y": 3 }, - { "label": ">", "x": 10.25, "y": 3 }, - { "label": "?", "x": 11.25, "y": 3 }, - { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, - { "label": "Fn", "x": 14, "y": 3, "w": 1 }, - { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, - { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, - { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, - { "label": "Space", "x": 3.75, "y": 4, "w": 6.25 }, - { "label": "Alt", "x": 10, "y": 4, "w": 1.25 }, - { "label": "Menu", "x": 11.25, "y": 4, "w": 1.25 }, - { "label": "Win", "x": 12.5, "y": 4, "w": 1.25 }, - { "label": "Ctrl", "x": 13.75, "y": 4, "w": 1.25 } - ] - } - } -} diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/mcuconf.h b/keyboards/4pplet/eagle_viper_rep/rev_a/mcuconf.h deleted file mode 100644 index ffa97b392c..0000000000 --- a/keyboards/4pplet/eagle_viper_rep/rev_a/mcuconf.h +++ /dev/null @@ -1,34 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* - * This file was auto-generated by: - * `qmk chibios-confmigrate -i keyboards/cannonkeys/db60/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` - */ - -#pragma once - -#include_next <mcuconf.h> - -#undef STM32_PWM_USE_TIM2 -#define STM32_PWM_USE_TIM2 TRUE - -#undef STM32_SPI_USE_SPI1 -#define STM32_SPI_USE_SPI1 TRUE - -/* Reallocate the SysTick timer from TIM2 to TIM3, TIM2 is used for in switch leds */ -#undef STM32_ST_USE_TIMER -#define STM32_ST_USE_TIMER 3 diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/readme.md b/keyboards/4pplet/eagle_viper_rep/rev_a/readme.md deleted file mode 100644 index 76415fd6c0..0000000000 --- a/keyboards/4pplet/eagle_viper_rep/rev_a/readme.md +++ /dev/null @@ -1,19 +0,0 @@ -# Viper/Eagle REP Rev A - -A alternative PCB for Viper and Eagle V2 and V3 - -* Keyboard Maintainer: [4pplet](https://github.com/4pplet) -* Hardware Supported: Viper/Eagle REP Rev A - -Make example for this keyboard (after setting up your build environment): - - make 4pplet/eagle_viper_rep/rev_a:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -How to enter bootloader (DFU): -* Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware. -* Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it. - -Alternative option if the firmware is already pre-flashed: -* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default. diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c b/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c deleted file mode 100644 index 2971460bd2..0000000000 --- a/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c +++ /dev/null @@ -1,108 +0,0 @@ -/* -Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#include "rev_a.h" - -void board_init(void) { - setPinInputHigh(CAPS_PIN); - setPinInputHigh(SCROLL_PIN); - setPinInputHigh(NUM_PIN); -} - -/* Set indicator leds to indicate lock states */ -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if(res && LOCK_LIGHTS) { - if(led_state.caps_lock){ - setPinOutput(CAPS_PIN); - writePin(CAPS_PIN, 0); - } - else - setPinInputHigh(CAPS_PIN); - if(led_state.scroll_lock){ - setPinOutput(SCROLL_PIN); - writePin(SCROLL_PIN, 0); - } - else - setPinInputHigh(SCROLL_PIN); - if(led_state.num_lock){ - setPinOutput(NUM_PIN); - writePin(NUM_PIN, 0); - } - else - setPinInputHigh(NUM_PIN); - } - return res; -} - -layer_state_t layer_state_set_kb(layer_state_t state) { - state = layer_state_set_user(state); - if(DISPLAY_LAYERS){ - setLayerLed(state); - } - return state; -} -/* Set indicator leds to indicate which layer is active */ -void setLayerLed(layer_state_t state){ - switch(get_highest_layer(state)){ - case 0 : - setPinOutput(LAYER_1); - writePin(LAYER_1, 0); - setPinInputHigh(LAYER_2); - setPinInputHigh(LAYER_3); - setPinInputHigh(LAYER_4); - setPinInputHigh(LAYER_5); - break; - case 1 : - setPinOutput(LAYER_2); - writePin(LAYER_2, 0); - setPinInputHigh(LAYER_1); - setPinInputHigh(LAYER_3); - setPinInputHigh(LAYER_4); - setPinInputHigh(LAYER_5); - break; - case 2 : - setPinOutput(LAYER_3); - writePin(LAYER_3, 0); - setPinInputHigh(LAYER_1); - setPinInputHigh(LAYER_2); - setPinInputHigh(LAYER_4); - setPinInputHigh(LAYER_5); - break; - case 3 : - writePin(LAYER_4, 0); - setPinInputHigh(LAYER_5); - setPinInputHigh(LAYER_1); - setPinInputHigh(LAYER_2); - setPinInputHigh(LAYER_3); - setPinOutput(LAYER_4); - break; - case 4 : - setPinOutput(LAYER_5); - writePin(LAYER_5, 0); - setPinInputHigh(LAYER_1); - setPinInputHigh(LAYER_2); - setPinInputHigh(LAYER_3); - setPinInputHigh(LAYER_4); - break; - default : - setPinInputHigh(LAYER_1); - setPinInputHigh(LAYER_2); - setPinInputHigh(LAYER_3); - setPinInputHigh(LAYER_4); - setPinInputHigh(LAYER_5); - } -} diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h b/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h deleted file mode 100644 index 5dac41f921..0000000000 --- a/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h +++ /dev/null @@ -1,41 +0,0 @@ -/* -Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#pragma once - -#include "quantum.h" - -void setLayerLed(layer_state_t state); - -#define LAYOUT_all( \ - k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k36, \ - k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k56,\ - k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k76,\ - k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k96,\ - k80, k90, k91, k93, k94, k85, k95, k86 \ -) \ -{ \ - {k00, k01, k02, k03, k04, k05, k06}, \ - {k10, k11, k12, k13, k14, k15, k16}, \ - {k20, k21, k22, k23, k24, k25, k26}, \ - {k30, k31, k32, k33, k34, k35, k36}, \ - {k40, k41, k42, k43, k44, k45, k46}, \ - {k50, k51, k52, k53, k54, k55, k56}, \ - {k60, k61, k62, k63, k64, k65, k66}, \ - {k70, k71, k72, k73, k74, k75, k76}, \ - {k80, KC_NO, KC_NO, KC_NO, KC_NO, k85, k86}, \ - {k90, k91, KC_NO, k93, k94, k95, k96} \ -} diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk b/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk deleted file mode 100644 index 35f765bc83..0000000000 --- a/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk +++ /dev/null @@ -1,25 +0,0 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Enable N-Key Rollover -BACKLIGHT_ENABLE = yes -BACKLIGHT_DRIVER = pwm -RGBLIGHT_ENABLE = yes -WS2812_DRIVER = spi - -# Wildcard to allow APM32 MCU -DFU_SUFFIX_ARGS = -p FFFF -v FFFF - -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE |