diff options
Diffstat (limited to 'keyboards/40percentclub/ut47')
22 files changed, 1684 insertions, 0 deletions
diff --git a/keyboards/40percentclub/ut47/LED_controls.ino b/keyboards/40percentclub/ut47/LED_controls.ino new file mode 100644 index 0000000000..dd50300eb7 --- /dev/null +++ b/keyboards/40percentclub/ut47/LED_controls.ino @@ -0,0 +1,420 @@ +#include <FastGPIO.h> +#include <TimerOne.h> + +int iByte; +byte col = 0; +byte leds[12][4]; +byte pass = 1; +int fadecount = 1; +const int fadelimit = 3000; +const int fadelimitshort = 1000; +byte mode = 4; +byte brightness = 2; +boolean changemode = 0; +int rain = 0; +const int rainlimit = 5000; +const int rainfade = 5000; +byte rx = 0; +byte ry = 0; + +// pin[xx] on led matrix connected to nn on Arduino (-1 is dummy to make array start at pos 1) +int pins[17] = { + -1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 16, 14, 15, 18, 19, 20, 21 +}; + +// col[xx] of leds = pin yy on led matrix +int cols[12] = { + pins[8], pins[7], pins[6], pins[5], pins[9], pins[10], pins[11], pins[12], pins[13], pins[14], pins[15], pins[16] +}; + +// row[xx] of leds = pin yy on led matrix +int rows[4] = { + pins[1], pins[2], pins[3], pins[4] +}; + + +#define DELAY 0 +extern byte leds[12][4]; + +void setup() { + Serial1.begin(9600); + setupLeds(); + for (int s = 0; s < 5; s++) { + for ( int r = 1; r < 9; r++) { + delayMicroseconds(65000); + delayMicroseconds(65000); + for (int j = 0; j < 4; j++) { + for (int i = 0; i < 12; i++) { + leds[i][j] = 1; + for (int p = 0; p < 25; p++) { + } + leds[i][j] = r; + } + } + } + for ( int r = 9; r > 0; r--) { + delayMicroseconds(65000); + delayMicroseconds(65000); + delayMicroseconds(65000); + for (int j = 0; j < 4; j++) { + for (int i = 0; i < 12; i++) { + leds[i][j] = 1; + for (int p = 0; p < 25; p++) { + } + leds[i][j] = r; + } + } + } + } +} + +void loop() { + + switch (mode) { + case 0: + //Blacklight + for (int i = 0; i < 12; i++) { + for (int j = 0; j < 4; j++) { + leds[i][j] = brightness; + } + } + checkserial(); + break; + case 1: + //Breathing + for ( int r = 1; r < 9; r++) { + checkserial(); + if (changemode == 0) { + delayMicroseconds(65000); + delayMicroseconds(65000); + delayMicroseconds(65000); + for (int j = 0; j < 4; j++) { + for (int i = 0; i < 12; i++) { + leds[i][j] = 1; + for (int p = 0; p < 25; p++) { + } + leds[i][j] = r; + } + } + } + else { + break; + } + } + for ( int r = 9; r > 0; r--) { + checkserial(); + if (changemode == 0) { + delayMicroseconds(65000); + delayMicroseconds(65000); + delayMicroseconds(65000); + delayMicroseconds(65000); + for (int j = 0; j < 4; j++) { + for (int i = 0; i < 12; i++) { + leds[i][j] = 1; + for (int p = 0; p < 25; p++) { + } + leds[i][j] = r; + } + } + } + else { + break; + } + } + for ( int r = 1; r < 30; r++) { + checkserial(); + if (changemode == 0) { + delayMicroseconds(65000); + delayMicroseconds(65000); + } + else { + break; + } + } + break; + case 2: + //Random + leds[random(12)][random(4)] = random(8); + delayMicroseconds(10000); + checkserial(); + break; + case 3: + //Rain + rain++; + if (rain > rainlimit) { + rain = 0; + rx = random(12); + ry = random(4); + if (leds[rx][ry] == 0) { + leds[rx][ry] = 18; + } + } + fadecount++; + if (fadecount > rainfade) { + fadecount = 1; + for (int i = 0; i < 12; i++) { + for (int j = 0; j < 4; j++) { + if (leds[i][j] > 0) { + leds[i][j] = leds[i][j] - 1; + } + } + } + } + checkserial(); + break; + case 4: + //Reactive + fadecount++; + if (fadecount > fadelimit) { + fadecount = 1; + for (int i = 0; i < 12; i++) { + for (int j = 0; j < 4; j++) { + if (leds[i][j] > 0) { + leds[i][j] = leds[i][j] - 1; + } + } + } + } + checkserial(); + break; + case 5: + //Reactive Target + fadecount++; + if (fadecount > fadelimitshort) { + fadecount = 1; + for (int i = 0; i < 12; i++) { + for (int j = 0; j < 4; j++) { + if (leds[i][j] > 0) { + leds[i][j] = leds[i][j] - 1; + } + } + } + } + checkserial(); + break; + default: + mode = 0; + break; + } + changemode = 0; +} + +void checkserial() { + if (Serial1.available() > 0) { + iByte = Serial1.read(); + if (iByte == 100) { + brightness++; + if (brightness > 9) { + brightness = 1; + } + } + if (iByte == 101) { + mode++; + } + if (iByte < 100) { + if (mode == 4) { + byte row = iByte / 16; + byte col = iByte % 16; + leds[col][row] = 18; + } + if (mode == 5) { + byte row = iByte / 16; + byte col = iByte % 16; + for (byte i = 0; i < 12; i++) { + leds[i][row] = 18; + } + for (byte p = 0; p < 4; p++) { + leds[col][p] = 18; + } + } + } + } +} + +void setupLeds() { + // sets the pins as output + FastGPIO::Pin<2>::setOutputLow(); + FastGPIO::Pin<3>::setOutputLow(); + FastGPIO::Pin<4>::setOutputLow(); + FastGPIO::Pin<5>::setOutputLow(); + FastGPIO::Pin<6>::setOutputLow(); + FastGPIO::Pin<7>::setOutputLow(); + FastGPIO::Pin<8>::setOutputLow(); + FastGPIO::Pin<9>::setOutputLow(); + FastGPIO::Pin<10>::setOutputLow(); + FastGPIO::Pin<16>::setOutputLow(); + FastGPIO::Pin<14>::setOutputLow(); + FastGPIO::Pin<15>::setOutputLow(); + FastGPIO::Pin<18>::setOutputLow(); + FastGPIO::Pin<19>::setOutputLow(); + FastGPIO::Pin<20>::setOutputLow(); + FastGPIO::Pin<21>::setOutputLow(); + + // set up Cols + FastGPIO::Pin<6>::setOutputValueLow(); + FastGPIO::Pin<7>::setOutputValueLow(); + FastGPIO::Pin<8>::setOutputValueLow(); + FastGPIO::Pin<9>::setOutputValueLow(); + FastGPIO::Pin<10>::setOutputValueLow(); + FastGPIO::Pin<16>::setOutputValueLow(); + FastGPIO::Pin<14>::setOutputValueLow(); + FastGPIO::Pin<15>::setOutputValueLow(); + FastGPIO::Pin<18>::setOutputValueLow(); + FastGPIO::Pin<19>::setOutputValueLow(); + FastGPIO::Pin<20>::setOutputValueLow(); + FastGPIO::Pin<21>::setOutputValueLow(); + + // set up Rows + FastGPIO::Pin<2>::setOutputValueLow(); + FastGPIO::Pin<3>::setOutputValueLow(); + FastGPIO::Pin<4>::setOutputValueLow(); + FastGPIO::Pin<5>::setOutputValueLow(); + + clearLeds(); + Timer1.initialize(25); + Timer1.attachInterrupt(display); + +} + +void clearLeds() { + // Clear display array + for (int i = 0; i < 12; i++) { + for (int j = 0; j < 4; j++) { + leds[i][j] = 0; + } + } +} + +void onLeds() { + // Clear display array + for (int i = 0; i < 12; i++) { + for (int j = 0; j < 4; j++) { + leds[i][j] = 7; + } + } +} + +// Interrupt routine +void display() { + + switch (col) { // Turn whole previous column off + case 0: + FastGPIO::Pin<6>::setOutputValueLow(); + break; + case 1: + FastGPIO::Pin<7>::setOutputValueLow(); + break; + case 2: + FastGPIO::Pin<8>::setOutputValueLow(); + break; + case 3: + FastGPIO::Pin<9>::setOutputValueLow(); + break; + case 4: + FastGPIO::Pin<10>::setOutputValueLow(); + break; + case 5: + FastGPIO::Pin<16>::setOutputValueLow(); + break; + case 6: + FastGPIO::Pin<14>::setOutputValueLow(); + break; + case 7: + FastGPIO::Pin<15>::setOutputValueLow(); + break; + case 8: + FastGPIO::Pin<18>::setOutputValueLow(); + break; + case 9: + FastGPIO::Pin<19>::setOutputValueLow(); + break; + case 10: + FastGPIO::Pin<20>::setOutputValueLow(); + break; + case 11: + FastGPIO::Pin<21>::setOutputValueLow(); + break; + } + + col++; + if (col == 12) { + col = 0; + pass++; + if (pass > 8) { + pass = 1; + } + } + for (int row = 0; row < 4; row++) { + if (leds[col][row] > pass) { + switch (row) { // Turn on this led + case 0: + FastGPIO::Pin<2>::setOutputValueLow(); + break; + case 1: + FastGPIO::Pin<3>::setOutputValueLow(); + break; + case 2: + FastGPIO::Pin<4>::setOutputValueLow(); + break; + case 3: + FastGPIO::Pin<5>::setOutputValueLow(); + break; + } + } + else { + switch (row) { // Turn off this led + case 0: + FastGPIO::Pin<2>::setOutputValueHigh(); + break; + case 1: + FastGPIO::Pin<3>::setOutputValueHigh(); + break; + case 2: + FastGPIO::Pin<4>::setOutputValueHigh(); + break; + case 3: + FastGPIO::Pin<5>::setOutputValueHigh(); + break; + } + } + } + switch (col) { // Turn column on + case 0: + FastGPIO::Pin<6>::setOutputValueHigh(); + break; + case 1: + FastGPIO::Pin<7>::setOutputValueHigh(); + break; + case 2: + FastGPIO::Pin<8>::setOutputValueHigh(); + break; + case 3: + FastGPIO::Pin<9>::setOutputValueHigh(); + break; + case 4: + FastGPIO::Pin<10>::setOutputValueHigh(); + break; + case 5: + FastGPIO::Pin<16>::setOutputValueHigh(); + break; + case 6: + FastGPIO::Pin<14>::setOutputValueHigh(); + break; + case 7: + FastGPIO::Pin<15>::setOutputValueHigh(); + break; + case 8: + FastGPIO::Pin<18>::setOutputValueHigh(); + break; + case 9: + FastGPIO::Pin<19>::setOutputValueHigh(); + break; + case 10: + FastGPIO::Pin<20>::setOutputValueHigh(); + break; + case 11: + FastGPIO::Pin<21>::setOutputValueHigh(); + break; + } + +} diff --git a/keyboards/40percentclub/ut47/config.h b/keyboards/40percentclub/ut47/config.h new file mode 100644 index 0000000000..4335e3edd5 --- /dev/null +++ b/keyboards/40percentclub/ut47/config.h @@ -0,0 +1,87 @@ +/* +Copyright 2018 Carlos Filoteo + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER 40percent.club +#define PRODUCT ut47 +#define DESCRIPTION An awesome 40% keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +#define MATRIX_ROW_PINS { D1, D0, D4, C6 } +#define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Enable GNAP matrix serial output */ +#define GNAP_ENABLE + +/* USART configuration */ +#ifdef __AVR_ATmega32U4__ +# define SERIAL_UART_BAUD 9600 +# define SERIAL_UART_DATA UDR1 +# define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) +# define SERIAL_UART_RXD_VECT USART1_RX_vect +# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) +# define SERIAL_UART_INIT() do { \ + /* baud rate */ \ + UBRR1L = SERIAL_UART_UBRR; \ + /* baud rate */ \ + UBRR1H = SERIAL_UART_UBRR >> 8; \ + /* enable TX */ \ + UCSR1B = _BV(TXEN1); \ + /* 8-bit data */ \ + UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ + sei(); \ + } while(0) +# else +# error "USART configuration is needed." +#endif + +#endif diff --git a/keyboards/40percentclub/ut47/info.json b/keyboards/40percentclub/ut47/info.json new file mode 100644 index 0000000000..59bffe99a3 --- /dev/null +++ b/keyboards/40percentclub/ut47/info.json @@ -0,0 +1,13 @@ +{ + "keyboard_name": "UT47", + "url": "", + "maintainer": "qmk", + "width": 12.5, + "height": 4, + "layouts": { + "LAYOUT": { + "key_count": 47, + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Backspace", "x":11, "y":0, "w":1.5}, {"label":"LT(3) / Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"\"", "x":11.25, "y":1, "w":1.25}, {"label":"Shift", "x":0, "y":2, "w":1.5}, {"label":"Z", "x":1.5, "y":2}, {"label":"X", "x":2.5, "y":2}, {"label":"C", "x":3.5, "y":2}, {"label":"V", "x":4.5, "y":2}, {"label":"B", "x":5.5, "y":2}, {"label":"N", "x":6.5, "y":2}, {"label":"M", "x":7.5, "y":2}, {"label":"<", "x":8.5, "y":2}, {"label":">", "x":9.5, "y":2}, {"label":"?", "x":10.5, "y":2}, {"label":"Shift / Enter", "x":11.5, "y":2}, {"label":"Ctrl", "x":0, "y":3}, {"label":"Alt", "x":1, "y":3}, {"label":"GUI", "x":2, "y":3}, {"label":"Menu", "x":3, "y":3}, {"label":"MO(2)", "x":4, "y":3, "w":1.25}, {"x":5.25, "y":3, "w":2}, {"label":"MO(1)", "x":7.25, "y":3, "w":1.25}, {"label":"\u2190", "x":8.5, "y":3}, {"label":"\u2193", "x":9.5, "y":3}, {"label":"\u2191", "x":10.5, "y":3}, {"label":"\u2192", "x":11.5, "y":3}] + } + } +} diff --git a/keyboards/40percentclub/ut47/keymaps/default/config.h b/keyboards/40percentclub/ut47/keymaps/default/config.h new file mode 100644 index 0000000000..46098a22fb --- /dev/null +++ b/keyboards/40percentclub/ut47/keymaps/default/config.h @@ -0,0 +1,24 @@ +/* Copyright 2018 Carlos Filoteo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "config_common.h" + +// place overrides here + +#endif diff --git a/keyboards/40percentclub/ut47/keymaps/default/keymap.c b/keyboards/40percentclub/ut47/keymaps/default/keymap.c new file mode 100644 index 0000000000..6b6bb025b1 --- /dev/null +++ b/keyboards/40percentclub/ut47/keymaps/default/keymap.c @@ -0,0 +1,136 @@ +/* Copyright 2018 Carlos Filoteo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H +#ifdef LED_ENABLE + #include "protocol/serial.h" +#endif + +#define _______ KC_TRNS +#define LT3_TAB LT(3, KC_TAB) +#define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT) + +enum custom_keycodes { + LED_TOG = SAFE_RANGE, + LED_CHG +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Base Layer + * ,-------------------------------------------------------------------------. + * | Esc | Q | W | E | R | T | Y | U | I | O | P |Bspace | + * |-------------------------------------------------------------------------+ + * |Tab/L3| A | S | D | F | G | H | J | K | L | ; | ' | + * |-------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / |Sh/En| + * |-------------------------------------------------------------------------+ + * | Ctrl| Alt | Gui | App | L2 | Space | L1 | Left| Down| Up |Right| + * `-------------------------------------------------------------------------' + */ + +LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + LT3_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MT_RSFT_ENT, + KC_LCTL, KC_LALT, KC_LGUI, KC_APP, MO(2), KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + + /* FN Layer 1 + * ,-------------------------------------------------------------------------. + * | ` ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Delete| + * |-------------------------------------------------------------------------+ + * | | | | | | | | - | = | [ | ] | \ | + * |-------------------------------------------------------------------------+ + * | | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | | + * |-------------------------------------------------------------------------+ + * | | | |Capsl| | | | Home| PgDn| PgUp| End | + * `-------------------------------------------------------------------------' + */ + +LAYOUT( /* Right */ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELETE, + _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, _______, + _______, _______, _______, KC_CAPS, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END +), + + /* FN Layer 2 + * ,-------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) |Delete| + * |-------------------------------------------------------------------------+ + * | | | | | | | | _ | + | { | } | | | + * |-------------------------------------------------------------------------+ + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | | + * |-------------------------------------------------------------------------+ + * | | | |Capsl| | | | Home| PgDn| PgUp| End | + * `-------------------------------------------------------------------------' + */ + +LAYOUT( /* Left */ + KC_TILDE, KC_EXCLAIM, KC_AT, KC_HASH, KC_DOLLAR, KC_PERCENT, KC_CIRCUMFLEX, KC_AMPERSAND, KC_ASTERISK, KC_LEFT_PAREN, KC_RIGHT_PAREN, KC_DELETE, + _______, _______, _______, _______, _______, _______, _______, KC_UNDERSCORE, KC_PLUS, KC_LEFT_CURLY_BRACE, KC_RIGHT_CURLY_BRACE, KC_PIPE, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, + _______, _______, _______, KC_CAPS, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END +), + + /* FN Layer 2 + * ,-------------------------------------------------------------------------. + * | Esc | Calc|Webhm| Mail| Comp| | | | | |PrtSc| | + * |-------------------------------------------------------------------------+ + * | | | | | | | | | | | | | + * |-------------------------------------------------------------------------+ + * | |LEDtg|LEDch| | | | | | | | | | + * |-------------------------------------------------------------------------+ + * | | | | | | | |MousL|MousD|MousU|MousR| + * `-------------------------------------------------------------------------' + */ + +LAYOUT( /* Tab */ + KC_ESC, KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, LED_TOG, LED_CHG, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R +), +}; + +//LED keymap functions + #ifdef LED_ENABLE +void led_chmode(void) { + serial_send(101); +} + +void led_toggle(void) { + serial_send(100); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + switch(keycode) { + case LED_TOG: + #ifdef LED_ENABLE + led_toggle(); + #endif + return false; + case LED_CHG: + #ifdef LED_ENABLE + led_chmode(); + #endif + return false; + } + } + return true; +}; +#endif diff --git a/keyboards/40percentclub/ut47/keymaps/default/readme.md b/keyboards/40percentclub/ut47/keymaps/default/readme.md new file mode 100644 index 0000000000..e09dc73fab --- /dev/null +++ b/keyboards/40percentclub/ut47/keymaps/default/readme.md @@ -0,0 +1,19 @@ +# UT47 default keymap + + + +[KLE](http://www.keyboard-layout-editor.com/##@@_y:0%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&_w:1.5%3B&=Back%20Space&_x:0.25&a:4&f:4&w:4&h:4&d:true%3B&=%3Cb%3EGNAP!%3C%2F%2Fb%3E%3Cp%3E%3Cp%3EMinimum%20stagger%3Cp%3E47%20key%20layout%3B&@_a:7&f:3&w:1.25%3B&=Tab&=A&=S&=D&=F&=G&=H&=J&=K&=L&=%2F%3B&_w:1.25%3B&=%27%3B&@_w:1.5%3B&=Shift&=Z&=X&=C&=V&=B&=N&=M&=,&=.&=%2F%2F&=Return%3B&@=Ctrl&=Alt&=Super&=Menu&_w:1.25%3B&=%2F&dArr%2F%3B&_w:2%3B&=&_w:1.25%3B&=%2F&uArr%2F%3B&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&uarr%2F%3B&=%2F&rarr%2F%3B%3B&=undefined) + +### LED Controls + +Use <kbd>TAB</kbd>+<kbd>Z</kbd> to cycle through brightness (8 steps) + +Use <kbd>TAB</kbd>+<kbd>X</kbd> to cycle through the following LED modes: + +- solid +- breathing +- random +- rain +- reactive +- poptang +- off diff --git a/keyboards/40percentclub/ut47/keymaps/non-us/config.h b/keyboards/40percentclub/ut47/keymaps/non-us/config.h new file mode 100644 index 0000000000..46098a22fb --- /dev/null +++ b/keyboards/40percentclub/ut47/keymaps/non-us/config.h @@ -0,0 +1,24 @@ +/* Copyright 2018 Carlos Filoteo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "config_common.h" + +// place overrides here + +#endif diff --git a/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c b/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c new file mode 100644 index 0000000000..1cb537b7d0 --- /dev/null +++ b/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c @@ -0,0 +1,136 @@ +/* Copyright 2018 Carlos Filoteo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H +#ifdef LED_ENABLE + #include "protocol/serial.h" +#endif + +#define _______ KC_TRNS +#define LT3_TAB LT(3, KC_TAB) +#define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT) + +enum custom_keycodes { + LED_TOG = SAFE_RANGE, + LED_CHG +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Base Layer + * ,-------------------------------------------------------------------------. + * | Esc | Q | W | E | R | T | Y | U | I | O | P |Bspace | + * |-------------------------------------------------------------------------+ + * |Tab/L3| A | S | D | F | G | H | J | K | L | ; | ' | + * |-------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / |Sh/En| + * |-------------------------------------------------------------------------+ + * | Ctrl| Alt | Gui | App | L2 | Space | L1 | Left| Down| Up |Right| + * `-------------------------------------------------------------------------' + */ + +LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + LT3_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MT_RSFT_ENT, + KC_LCTL, KC_LALT, KC_LGUI, KC_APP, MO(2), KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + + /* FN Layer 1 + * ,-------------------------------------------------------------------------. + * | ` ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Delete| + * |-------------------------------------------------------------------------+ + * | | | | | | | # | - | = | [ | ] | \ | + * |-------------------------------------------------------------------------+ + * | | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | | + * |-------------------------------------------------------------------------+ + * | | | |Capsl| | | | Home| PgDn| PgUp| End | + * `-------------------------------------------------------------------------' + */ + +LAYOUT( /* Right */ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELETE, + _______, _______, _______, _______, _______, _______, KC_NUHS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_NUBS, + _______, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, _______, + _______, _______, _______, KC_CAPS, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END +), + + /* FN Layer 2 + * ,-------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ |