5 files changed, 4 insertions, 40 deletions
diff --git a/keyboards/40percentclub/mf68/config.h b/keyboards/40percentclub/mf68/config.h
index 65ec5496a3..bae621fcac 100644
--- a/keyboards/40percentclub/mf68/config.h
+++ b/keyboards/40percentclub/mf68/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 8
@@ -53,41 +52,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 // #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/40percentclub/mf68/info.json b/keyboards/40percentclub/mf68/info.json
index 5a8164bcb4..89df2e1958 100644
--- a/keyboards/40percentclub/mf68/info.json
+++ b/keyboards/40percentclub/mf68/info.json
@@ -8,6 +8,9 @@
     "pid": "0x4D68",
     "device_version": "1.0.1"
   },
+  "processor": "atmega32u4",
+  "bootloader": "caterina",
+  "community_layouts": ["68_ansi"],
   "layouts": {
       "LAYOUT_68_ansi": {
           "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"x":15.25, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}]
diff --git a/keyboards/40percentclub/mf68/keymaps/delivrance/keymap.c b/keyboards/40percentclub/mf68/keymaps/delivrance/keymap.c
index ed98d947e5..8d69a5a8af 100644
--- a/keyboards/40percentclub/mf68/keymaps/delivrance/keymap.c
+++ b/keyboards/40percentclub/mf68/keymaps/delivrance/keymap.c
@@ -197,7 +197,7 @@ void led_set_user(uint8_t usb_led) {
 static uint32_t timer;
 static bool is_idle;
 
-void matrix_scan_user() {
+void matrix_scan_user(void) {
     // Check the timer only if the keyboard is not idle
     if (!is_idle) {
         if (timer_elapsed32(timer) >= (uint32_t) BACKLIGHT_IDLE_TIMEOUT * 1000) {
diff --git a/keyboards/40percentclub/mf68/keymaps/mf68_ble/config.h b/keyboards/40percentclub/mf68/keymaps/mf68_ble/config.h
index caaafa67c6..1e87c64a7e 100644
--- a/keyboards/40percentclub/mf68/keymaps/mf68_ble/config.h
+++ b/keyboards/40percentclub/mf68/keymaps/mf68_ble/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* Overrides for Feather 32u4 Bluefruit */
 
diff --git a/keyboards/40percentclub/mf68/rules.mk b/keyboards/40percentclub/mf68/rules.mk
index 601989a338..b325f3f0c7 100644
--- a/keyboards/40percentclub/mf68/rules.mk
+++ b/keyboards/40percentclub/mf68/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #
@@ -16,5 +10,3 @@ NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = 68_ansi