summaryrefslogtreecommitdiffstats
path: root/keyboards/40percentclub/4pack/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/40percentclub/4pack/config.h')
-rw-r--r--keyboards/40percentclub/4pack/config.h87
1 files changed, 0 insertions, 87 deletions
diff --git a/keyboards/40percentclub/4pack/config.h b/keyboards/40percentclub/4pack/config.h
index 2f89089428..2fc00cdc89 100644
--- a/keyboards/40percentclub/4pack/config.h
+++ b/keyboards/40percentclub/4pack/config.h
@@ -17,98 +17,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 1
-#define MATRIX_COLS 4
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-// #define MATRIX_ROW_PINS { B0 } // B0 equivalents the ground pin
-// #define MATRIX_COL_PINS { E6, D7, C6, D4 }
-#define DIRECT_PINS { \
- { E6, D7, C6, D4 } \
-}
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
#define BACKLIGHT_LED_COUNT 2
#undef BACKLIGHT_PIN
#define BACKLIGHT_PINS { F6, F7 }
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -124,7 +41,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0