diff options
Diffstat (limited to 'keyboard')
87 files changed, 18841 insertions, 8532 deletions
diff --git a/keyboard/atomic/Makefile b/keyboard/atomic/Makefile index da6d0ac60c..1d91c34b7f 100644 --- a/keyboard/atomic/Makefile +++ b/keyboard/atomic/Makefile @@ -27,7 +27,7 @@ # make flip-ee = Download the eeprom file to the device, using Atmel FLIP # (must have Atmel FLIP installed). # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -41,7 +41,6 @@ # Target file name (without extension). TARGET = atomic - # Directory common source filess exist TOP_DIR = ../.. TMK_DIR = ../../tmk_core @@ -50,15 +49,42 @@ TMK_DIR = ../../tmk_core TARGET_DIR = . # # project specific files -SRC = atomic.c \ - backlight.c +SRC = atomic.c + +ifdef keymap + KEYMAP = $(keymap) +endif ifdef KEYMAP - SRC := keymaps/$(KEYMAP).c $(SRC) +ifneq ("$(wildcard keymaps/$(KEYMAP).c)","") + KEYMAP_FILE = keymaps/$(KEYMAP).c +else +ifneq ("$(wildcard keymaps/$(KEYMAP)/keymap.c)","") + KEYMAP_FILE = keymaps/$(KEYMAP)/keymap.c +ifneq ("$(wildcard keymaps/$(KEYMAP)/makefile.mk)","") + include keymaps/$(KEYMAP)/makefile.mk +endif +else +$(error Keymap file does not exist) +endif +endif + else - SRC := keymaps/default.c $(SRC) + +ifneq ("$(wildcard keymaps/default.c)","") + KEYMAP_FILE = keymaps/default.c +else + KEYMAP_FILE = keymaps/default/keymap.c +endif + +ifneq ("$(wildcard keymaps/default/makefile.mk)","") + include keymaps/default/makefile.mk endif +endif + +SRC := $(KEYMAP_FILE) $(SRC) + CONFIG_H = config.h # MCU name @@ -78,7 +104,6 @@ MCU = atmega32u4 # software delays. F_CPU = 16000000 - # # LUFA specific # @@ -110,23 +135,45 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # USBaspLoader 2048 OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration +# change to "no" to disable the options, or define them in the makefile.mk in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifdef KEYMAP + +ifeq ("$(wildcard keymaps/$(KEYMAP).c)","") +ifneq ("$(wildcard keymaps/$(KEYMAP)/makefile.mk)","") + include keymaps/$(KEYMAP)/makefile.mk +endif +endif +else + +ifneq ("$(wildcard keymaps/default/makefile.mk)","") + include keymaps/default/makefile.mk +endif + +endif + +ifeq ($(strip $(BACKLIGHT_ENABLE)), yes) + SRC := backlight.c $(SRC) +endif # Optimize size but this may cause error "relocation truncated to fit" #EXTRALDFLAGS = -Wl,--relax @@ -136,5 +183,4 @@ VPATH += $(TARGET_DIR) VPATH += $(TOP_DIR) VPATH += $(TMK_DIR) -include $(TOP_DIR)/quantum/quantum.mk - +include $(TOP_DIR)/quantum/quantum.mk
\ No newline at end of file diff --git a/keyboard/atomic/atomic.c b/keyboard/atomic/atomic.c index 30e8122893..5e31264e68 100644 --- a/keyboard/atomic/atomic.c +++ b/keyboard/atomic/atomic.c @@ -2,12 +2,22 @@ __attribute__ ((weak)) void matrix_init_user(void) { - // leave these blank -} + // leave this function blank - it can be defined in a keymap file +}; __attribute__ ((weak)) void matrix_scan_user(void) { - // leave these blank + // leave this function blank - it can be defined in a keymap file +} + +__attribute__ ((weak)) +void process_action_user(keyrecord_t *record) { + // leave this function blank - it can be defined in a keymap file +} + +__attribute__ ((weak)) +void led_set_user(uint8_t usb_led) { + // leave this function blank - it can be defined in a keymap file } void matrix_init_kb(void) { @@ -33,4 +43,17 @@ void matrix_scan_kb(void) { // runs every cycle (a lot) matrix_scan_user(); -}
\ No newline at end of file +} + +void process_action_kb(keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + process_action_user(record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboard/atomic/atomic.h b/keyboard/atomic/atomic.h index d8574efa93..d5461e424d 100644 --- a/keyboard/atomic/atomic.h +++ b/keyboard/atomic/atomic.h @@ -26,5 +26,8 @@ void matrix_init_user(void); void matrix_scan_user(void); +void process_action_user(keyrecord_t *record); +void led_set_user(uint8_t usb_led); +void backlight_init_ports(void); #endif
\ No newline at end of file diff --git a/keyboard/atomic/backlight.c b/keyboard/atomic/backlight.c index f69364b2af..647b57e718 100644 --- a/keyboard/atomic/backlight.c +++ b/keyboard/atomic/backlight.c @@ -1,6 +1,8 @@ #include <avr/io.h> #include "backlight.h" +#include "atomic.h" + #define CHANNEL OCR1C diff --git a/keyboard/atomic/config.h b/keyboard/atomic/config.h index 149aed4714..1b34decf9c 100644 --- a/keyboard/atomic/config.h +++ b/keyboard/atomic/config.h @@ -32,36 +32,109 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 5 #define MATRIX_COLS 15 -// Planck PCB default pin-out -// Change this to how you wired your keyboard -// COLS: Left to right, ROWS: Top to bottom +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ #define COLS (int []){ F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7, D3, D2, D1 } #define ROWS (int []){ D0, D5, B5, B6, C6 } /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST /* number of backlight levels */ -/* NOTE: this is the max value of 0..BACKLIGHT_LEVELS so really 16 levels. */ #define BACKLIGHT_LEVELS 3 -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* key combination for command */ +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) - +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z / |