diff options
Diffstat (limited to 'keyboard')
92 files changed, 20969 insertions, 10744 deletions
diff --git a/keyboard/atomic/Makefile b/keyboard/atomic/Makefile index 3f066aebcd..c1a0a6db42 100644 --- a/keyboard/atomic/Makefile +++ b/keyboard/atomic/Makefile @@ -142,7 +142,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality @@ -171,10 +171,6 @@ endif endif -ifeq ($(strip $(BACKLIGHT_ENABLE)), yes) - SRC := backlight.c $(SRC) -endif - # Optimize size but this may cause error "relocation truncated to fit" #EXTRALDFLAGS = -Wl,--relax diff --git a/keyboard/atomic/atomic.c b/keyboard/atomic/atomic.c index 30e8122893..3996497161 100644 --- a/keyboard/atomic/atomic.c +++ b/keyboard/atomic/atomic.c @@ -2,12 +2,22 @@ __attribute__ ((weak)) void matrix_init_user(void) { - // leave these blank -} + // leave this function blank - it can be defined in a keymap file +}; __attribute__ ((weak)) void matrix_scan_user(void) { - // leave these blank + // leave this function blank - it can be defined in a keymap file +} + +__attribute__ ((weak)) +void process_action_user(keyrecord_t *record) { + // leave this function blank - it can be defined in a keymap file +} + +__attribute__ ((weak)) +void led_set_user(uint8_t usb_led) { + // leave this function blank - it can be defined in a keymap file } void matrix_init_kb(void) { @@ -33,4 +43,78 @@ void matrix_scan_kb(void) { // runs every cycle (a lot) matrix_scan_user(); -}
\ No newline at end of file +} + +void process_action_kb(keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + process_action_user(record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + +#ifdef BACKLIGHT_ENABLE +#define CHANNEL OCR1C + +void backlight_init_ports() +{ + + // Setup PB7 as output and output low. + DDRB |= (1<<7); + PORTB &= ~(1<<7); + + // Use full 16-bit resolution. + ICR1 = 0xFFFF; + + // I could write a wall of text here to explain... but TL;DW + // Go read the ATmega32u4 datasheet. + // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on + + // Pin PB7 = OCR1C (Timer 1, Channel C) + // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 + // (i.e. start high, go low when counter matches.) + // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0 + // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1 + + TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; + TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; + + backlight_init(); +} + +void backlight_set(uint8_t level) +{ + if ( level == 0 ) + { + // Turn off PWM control on PB7, revert to output low. + TCCR1A &= ~(_BV(COM1C1)); + CHANNEL = 0x0; + // Prevent backlight blink on lowest level + PORTB &= ~(_BV(PORTB7)); + } + else if ( level == BACKLIGHT_LEVELS ) + { + // Prevent backlight blink on lowest level + PORTB &= ~(_BV(PORTB7)); + // Turn on PWM control of PB7 + TCCR1A |= _BV(COM1C1); + // Set the brightness + CHANNEL = 0xFFFF; + } + else + { + // Prevent backlight blink on lowest level + PORTB &= ~(_BV(PORTB7)); + // Turn on PWM control of PB7 + TCCR1A |= _BV(COM1C1); + // Set the brightness + CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2)); + } +} + +#endif
\ No newline at end of file diff --git a/keyboard/atomic/atomic.h b/keyboard/atomic/atomic.h index d5461e424d..0c7aeb1cc8 100644 --- a/keyboard/atomic/atomic.h +++ b/keyboard/atomic/atomic.h @@ -3,8 +3,11 @@ #include "matrix.h" #include "keymap_common.h" -#include "backlight.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif #include <stddef.h> +#include <avr/io.h> // This a shortcut to help you visually see your layout. // The following is an example using the Planck MIT layout diff --git a/keyboard/atomic/backlight.c b/keyboard/atomic/backlight.c deleted file mode 100644 index 647b57e718..0000000000 --- a/keyboard/atomic/backlight.c +++ /dev/null @@ -1,63 +0,0 @@ - -#include <avr/io.h> -#include "backlight.h" -#include "atomic.h" - - -#define CHANNEL OCR1C - -void backlight_init_ports() -{ - - // Setup PB7 as output and output low. - DDRB |= (1<<7); - PORTB &= ~(1<<7); - - // Use full 16-bit resolution. - ICR1 = 0xFFFF; - - // I could write a wall of text here to explain... but TL;DW - // Go read the ATmega32u4 datasheet. - // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on - - // Pin PB7 = OCR1C (Timer 1, Channel C) - // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 - // (i.e. start high, go low when counter matches.) - // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0 - // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1 - - TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; - TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; - - backlight_init(); -} - -void backlight_set(uint8_t level) -{ - if ( level == 0 ) - { - // Turn off PWM control on PB7, revert to output low. - TCCR1A &= ~(_BV(COM1C1)); - CHANNEL = 0x0; - // Prevent backlight blink on lowest level - PORTB &= ~(_BV(PORTB7)); - } - else if ( level == BACKLIGHT_LEVELS ) - { - // Prevent backlight blink on lowest level - PORTB &= ~(_BV(PORTB7)); - // Turn on PWM control of PB7 - TCCR1A |= _BV(COM1C1); - // Set the brightness - CHANNEL = 0xFFFF; - } - else - { - // Prevent backlight blink on lowest level - PORTB &= ~(_BV(PORTB7)); - // Turn on PWM control of PB7 - TCCR1A |= _BV(COM1C1); - // Set the brightness - CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2)); - } -}
\ No newline at end of file diff --git a/keyboard/atomic/keymaps/pvc/config.h b/keyboard/atomic/keymaps/pvc/config.h index 8449fa06de..cc92634646 100644 --- a/keyboard/atomic/keymaps/pvc/config.h +++ b/keyboard/atomic/keymaps/pvc/config.h @@ -41,7 +41,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * -*/ +*/ #define COLS (int []){ F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7, D3, D2, D1 } #define ROWS (int []){ D0, D5, B5, B6, B3 } @@ -62,17 +62,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* +// Enable Keyboard Locking via magic key +#define KEYBOARD_LOCK_ENABLE + + +/* * Force NKRO * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the * makefile for this to work.) * * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) * until the next keyboard reset. * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is * fully operational during normal computer usage. * * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) @@ -90,7 +94,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * the keyboard. They are best used in combination with the HID Listen program, * found here: https://www.pjrc.com/teensy/hid_listen.html * - * The options below allow the magic key functionality to be changed. This is + * The options below allow the magic key functionality to be changed. This is * useful if your keyboard/keypad is missing keys and you want magic key support. * */ diff --git a/keyboard/atomic/keymaps/pvc/keymap.c b/keyboard/atomic/keymaps/pvc/keymap.c index c2081f525e..e17c41e23d 100644 --- a/keyboard/atomic/keymaps/pvc/keymap.c +++ b/keyboard/atomic/keymaps/pvc/keymap.c @@ -1,29 +1,88 @@ #include "atomic.h" #include "action_layer.h" +#include "eeconfig.h" +#include "led.h" #ifdef AUDIO_ENABLE -#include "audio.h" -#include "musical_notes.h" + #include "audio.h" + #include "song_list.h" #endif +#define LAYER_QWERTY 0 +#define LAYER_COLEMAK 1 +#define LAYER_DVORAK 2 +#define LAYER_LOWER 3 +#define LAYER_RAISE 4 +#defi |