diff options
Diffstat (limited to 'keyboard/planck')
27 files changed, 2328 insertions, 0 deletions
diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile new file mode 100644 index 0000000000..3716f0db92 --- /dev/null +++ b/keyboard/planck/Makefile @@ -0,0 +1,148 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = planck_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# # project specific files +# SRC = keymap_common.c \ +# matrix_handwire.c \ +# led.c \ +# backlight.c + +# ifdef KEYMAP +# SRC := keymap_$(KEYMAP).c $(SRC) +# else +# SRC := keymap_jack.c $(SRC) +# endif + +# project specific files +SRC = extended_keymap_common.c \ + matrix_handwire.c \ + led.c \ + backlight.c + +ifdef KEYMAP + SRC := extended_keymap_$(KEYMAP).c $(SRC) +else + SRC := extended_keymap_jack.c $(SRC) +endif + +CONFIG_H = config.h + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/planck/Makefile.pjrc b/keyboard/planck/Makefile.pjrc new file mode 100644 index 0000000000..be83ba18b1 --- /dev/null +++ b/keyboard/planck/Makefile.pjrc @@ -0,0 +1,116 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = gh60_pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_jack.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +MCU = atmega32u4 +#MCU = at90usb1286 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+5000) +EXTRAKEY_ENABLE = yes # Audio control and System control(+600) +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover(+500) +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk + +plain: OPT_DEFS += -DKEYMAP_PLAIN +plain: all + +poker: OPT_DEFS += -DKEYMAP_POKER +poker: all + +poker_set: OPT_DEFS += -DKEYMAP_POKER_SET +poker_set: all + +poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT +poker_bit: all diff --git a/keyboard/planck/README.md b/keyboard/planck/README.md new file mode 100644 index 0000000000..530fc21212 --- /dev/null +++ b/keyboard/planck/README.md @@ -0,0 +1,39 @@ +Planck keyboard firmware +====================== +DIY/Assembled compact ortholinear 40% keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com). + +## Extended Keymap +If you include extended_keymap_common.h instead of keymap_common.h at the top of your file, you'll have access to a bunch of goodies: + +- Use `LSFT()`, `LCTL()`, et. al. (listed in extended_keymap_common.h) as modifiers for keys (daisy-chain-able) +- Use `FUNC(1)` instead of `FN1` (etc.) to access the function layers beyond the 32 function layer limit +- Use `CM_F` instead of `KC_F` to get the ColeMak equivilent for shortcuts (maps backwards) + +### Some notes on usage: + +- The `KEYMAP()` macro is unable to be used due to the bitwise modifications that take place - refer to extended_keymap_jack.c to see how to set things up with the `KC_` prefix +- Keep an eye on the Makefile - this needs to include the correct files to work +- Don't forget to use `const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {` instead of the 8bit equivilent + +## Build + +Follow [this guide](http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177.html) to setup your development environment before anything else. + +Download the whole firmware [here](https://github.com/jackhumbert/tmk_keyboard/archive/master.zip) and navigate to the keyboard/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex that you can load with the Teensy app onto your Planck (once you've hit reset/shorted GND & RST). + +Move to this directory then just run `make` like: + + $ make + +## Keymap +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document (you can find in top README.md) and existent keymap files. + +To build firmware binary hex file with a certain keymap just do `make` with `KEYMAP` option like: + + $ make KEYMAP=[<name>] + +## Notable TMK forks (which some of the keymap files are from) +- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck) +- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c) +- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck) +- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid)
\ No newline at end of file diff --git a/keyboard/planck/backlight.c b/keyboard/planck/backlight.c new file mode 100644 index 0000000000..ee7e31ee9c --- /dev/null +++ b/keyboard/planck/backlight.c @@ -0,0 +1,46 @@ + +#include <avr/io.h> +#include "backlight.h" + + +void backlight_init_ports() +{ + // Setup PB7 as output and output low. + DDRB |= (1<<7); + PORTB &= ~(1<<7); + + // Use full 16-bit resolution. + ICR1 = 0xFFFF; + + // I could write a wall of text here to explain... but TL;DW + // Go read the ATmega32u4 datasheet. + // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on + + // Pin PB7 = OCR1C (Timer 1, Channel C) + // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 + // (i.e. start high, go low when counter matches.) + // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0 + // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1 + + TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; + TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; + + // Default to zero duty cycle. + OCR1C = 0x0000; +} + +void backlight_set(uint8_t level) +{ + if ( level == 0 ) + { + // Turn off PWM control on PB7, revert to output low. + TCCR1A &= ~(_BV(COM1C1)); + } + else + { + // Turn on PWM control of PB7 + TCCR1A |= _BV(COM1C1); + OCR1C = level << 12 | 0x0FFF; + } +} + diff --git a/keyboard/planck/backlight.h b/keyboard/planck/backlight.h new file mode 100644 index 0000000000..0fe1f4a72b --- /dev/null +++ b/keyboard/planck/backlight.h @@ -0,0 +1,2 @@ + +void backlight_init_ports(void); diff --git a/keyboard/planck/config.h b/keyboard/planck/config.h new file mode 100644 index 0000000000..0b0c152479 --- /dev/null +++ b/keyboard/planck/config.h @@ -0,0 +1,74 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER jackhumbert +#define PRODUCT Planck +#define DESCRIPTION t.m.k. keyboard firmware for the Planck + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +/* NOTE: this is the max value of 0..BACKLIGHT_LEVELS so really 16 levels. */ +#define BACKLIGHT_LEVELS 15 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/planck/extended_keymap_common.c b/keyboard/planck/extended_keymap_common.c new file mode 100644 index 0000000000..d9f79ac041 --- /dev/null +++ b/keyboard/planck/extended_keymap_common.c @@ -0,0 +1,181 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "extended_keymap_common.h" +#include "report.h" +#include "keycode.h" +#include "action_layer.h" +#include "action.h" +#include "action_macro.h" +#include "debug.h" + + +static action_t keycode_to_action(uint16_t keycode); + + +/* converts key to action */ +action_t action_for_key(uint8_t layer, keypos_t key) +{ + // 16bit keycodes - important + uint16_t keycode = keymap_key_to_keycode(layer, key); + + if (keycode > 0x00FF && keycode < 0x2000) { + // Has a modifier + action_t action; + // Split it up + action.code = ACTION_MODS_KEY(keycode >> 8, keycode & 0xFF); + return action; + } else if (keycode > 0x1FFF && keycode < 0x3000) { + // Is a shortcut for function layer, pull last 12bits + return keymap_func_to_action(keycode & 0xFFF); + } + + switch (keycode) { + case KC_FN0 ... KC_FN31: + return keymap_fn_to_action(keycode); +#ifdef BOOTMAGIC_ENABLE + case KC_CAPSLOCK: + case KC_LOCKING_CAPS: + if (keymap_config.swap_control_capslock || keymap_config.capslock_to_control) { + return keycode_to_action(KC_LCTL); + } + return keycode_to_action(keycode); + case KC_LCTL: + if (keymap_config.swap_control_capslock) { + return keycode_to_action(KC_CAPSLOCK); + } + return keycode_to_action(KC_LCTL); + case KC_LALT: + if (keymap_config.swap_lalt_lgui) { + if (keymap_config.no_gui) { + return keycode_to_action(ACTION_NO); + } + return keycode_to_action(KC_LGUI); + } + return keycode_to_action(KC_LALT); + case KC_LGUI: + if (keymap_config.swap_lalt_lgui) { + return keycode_to_action(KC_LALT); + } + if (keymap_config.no_gui) { + return keycode_to_action(ACTION_NO); + } + return keycode_to_action(KC_LGUI); + case KC_RALT: + if (keymap_config.swap_ralt_rgui) { + if (keymap_config.no_gui) { + return keycode_to_action(ACTION_NO); + } + return keycode_to_action(KC_RGUI); + } + return keycode_to_action(KC_RALT); + case KC_RGUI: + if (keymap_config.swap_ralt_rgui) { + return keycode_to_action(KC_RALT); + } + if (keymap_config.no_gui) { + return keycode_to_action(ACTION_NO); + } + return keycode_to_action(KC_RGUI); + case KC_GRAVE: + if (keymap_config.swap_grave_esc) { + return keycode_to_action(KC_ESC); + } + return keycode_to_action(KC_GRAVE); + case KC_ESC: + if (keymap_config.swap_grave_esc) { + return keycode_to_action(KC_GRAVE); + } + return keycode_to_action(KC_ESC); + case KC_BSLASH: + if (keymap_config.swap_backslash_backspace) { + return keycode_to_action(KC_BSPACE); + } + return keycode_to_action(KC_BSLASH); + case KC_BSPACE: + if (keymap_config.swap_backslash_backspace) { + return keycode_to_action(KC_BSLASH); + } + return keycode_to_action(KC_BSPACE); +#endif + default: + return keycode_to_action(keycode); + } +} + + +/* Macro */ +__attribute__ ((weak)) +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + return MACRO_NONE; +} + +/* Function */ +__attribute__ ((weak)) +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) +{ +} + +/* translates keycode to action */ +static action_t keycode_to_action(uint16_t keycode) +{ + action_t action; + switch (keycode) { + case KC_A ... KC_EXSEL: + case KC_LCTRL ... KC_RGUI: + action.code = ACTION_KEY(keycode); + break; + case KC_SYSTEM_POWER ... KC_SYSTEM_WAKE: + action.code = ACTION_USAGE_SYSTEM(KEYCODE2SYSTEM(keycode)); + break; + case KC_AUDIO_MUTE ... KC_WWW_FAVORITES: + action.code = ACTION_USAGE_CONSUMER(KEYCODE2CONSUMER(keycode)); + break; + case KC_MS_UP ... KC_MS_ACCEL2: + action.code = ACTION_MOUSEKEY(keycode); + break; + case KC_TRNS: + action.code = ACTION_TRANSPARENT; + break; + default: + action.code = ACTION_NO; + break; + } + return action; +} + + +/* translates key to keycode */ +uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key) +{ + // Read entire word (16bits) + return pgm_read_word(&keymaps[(layer)][(key.row)][(key.col)]); +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint16_t keycode) +{ + return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; +} + +/* translates Fn keycode to action */ +action_t keymap_func_to_action(uint16_t keycode) +{ + // For FUNC without 8bit limit + return (action_t){ .code = pgm_read_word(&fn_actions[(int)keycode]) }; +}
\ No newline at end of file diff --git a/keyboard/planck/extended_keymap_common.h b/keyboard/planck/extended_keymap_common.h new file mode 100644 index 0000000000..24c2cb848e --- /dev/null +++ b/keyboard/planck/extended_keymap_common.h @@ -0,0 +1,115 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef KEYMAP_H +#define KEYMAP_H + +#include <stdint.h> +#include <stdbool.h> +#include "action.h" +#include <avr/pgmspace.h> +#include "keycode.h" +#include "keymap.h" +#include "action_macro.h" +#include "report.h" +#include "host.h" +#include "print.h" +#include "debug.h" + +#ifdef BOOTMAGIC_ENABLE +/* NOTE: Not portable. Bit field order depends on implementation */ +typedef union { + uint16_t raw; + struct { + bool swap_control_capslock:1; + bool capslock_to_control:1; + bool swap_lalt_lgui:1; + bool swap_ralt_rgui:1; + bool no_gui:1; + bool swap_grave_esc:1; + bool swap_backslash_backspace:1; + bool nkro:1; + }; +} keymap_config_t; +keymap_config_t keymap_config; +#endif + +/* translates key to keycode */ +uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key); + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint16_t keycode); + +/* translates Fn keycode to action */ +action_t keymap_func_to_action(uint16_t keycode); + +extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; +extern const uint16_t fn_actions[]; + +// Ability to use mods in layouts +#define LCTL(kc) kc | 0x0100 +#define LSFT(kc) kc | 0x0200 +#define LALT(kc) kc | 0x0400 +#define LGUI(kc) kc | 0x0800 +#define RCTL(kc) kc | 0x1100 +#define RSFT(kc) kc | 0x1200 +#define RALT(kc) kc | 0x1400 +#define RGUI(kc) kc | 0x1800 + +// Alias for function layers than expand past FN31 +#define FUNC(kc) kc | 0x2000 + +// Aliases +#define S(kc) LSFT(kc) +#define F(kc) FUNC(kc) + +// For software implementation of colemak +#define CM_Q KC_Q +#define CM_W KC_W +#define CM_F KC_E +#define CM_P KC_R +#define CM_G KC_T +#define CM_J KC_Y +#define CM_L KC_U +#define CM_U KC_I +#define CM_Y KC_O +#define CM_SCLN KC_P + +#define CM_A KC_A +#define CM_R KC_S +#define CM_S KC_D +#define CM_T KC_F +#define CM_D KC_G +#define CM_H KC_H +#define CM_N KC_J +#define CM_E KC_K +#define CM_I KC_L +#define CM_O KC_SCLN + +#define CM_Z KC_Z +#define CM_X KC_X +#define CM_C KC_C +#define CM_V KC_V +#define CM_B KC_B +#define CM_K KC_N +#define CM_M KC_M +#define CM_COMM KC_COMM +#define CM_DOT KC_DOT +#define CM_SLSH KC_SLSH + + +#endif diff --git a/keyboard/planck/extended_keymap_jack.c b/keyboard/planck/extended_keymap_jack.c new file mode 100644 index 0000000000..ef1eae49f7 --- /dev/null +++ b/keyboard/planck/extended_keymap_jack.c @@ -0,0 +1,38 @@ +#include "extended_keymap_common.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { /* Jack soft-coded colemak */ + {KC_TAB, CM_Q, CM_W, CM_F, CM_P, CM_G, CM_J, CM_L, CM_U, CM_Y, CM_SCLN, KC_BSPC}, + {KC_ESC, CM_A, CM_R, CM_S, CM_T, CM_D, CM_H, CM_N, CM_E, CM_I, CM_O, KC_QUOT}, + {KC_LSFT, CM_Z, CM_X, CM_C, CM_V, CM_B, CM_K, CM_M, CM_COMM, CM_DOT, CM_SLSH, KC_ENT}, + {KC_RSFT, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_NO, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[1] = { /* Jack hard-coded colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_NO, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[2] = { /* Jack RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[3] = { /* Jack LOWER */ + {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_NO, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +} +}; + + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay + [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + +};
\ No newline at end of file diff --git a/keyboard/planck/keymap_brett.c b/keyboard/planck/keymap_brett.c new file mode 100644 index 0000000000..97d832b47a --- /dev/null +++ b/keyboard/planck/keymap_brett.c @@ -0,0 +1,42 @@ +#include "keymap_common.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + LCTL, A, S, D, F, G, H, J, K, L, SCLN, ENT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, + TAB, LGUI, RSFT, LALT, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), +[1] = KEYMAP( /* RAISE */ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DEL, + TRNS, F1, F2, F3, F4, F5, F6, 4, 5, 6, QUOT, TRNS, + TRNS, F7, F8, F9, F10, F11, F12, 1, 2, 3, TRNS |