summaryrefslogtreecommitdiffstats
path: root/keyboard/lightsaber
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard/lightsaber')
-rw-r--r--keyboard/lightsaber/Makefile.lufa126
-rw-r--r--keyboard/lightsaber/Makefile.pjrc94
-rw-r--r--keyboard/lightsaber/README.md26
-rw-r--r--keyboard/lightsaber/backlight.c86
-rw-r--r--keyboard/lightsaber/backlight.h9
-rw-r--r--keyboard/lightsaber/config.h46
-rw-r--r--keyboard/lightsaber/keymap.c77
-rw-r--r--keyboard/lightsaber/keymap_winkey.h29
-rw-r--r--keyboard/lightsaber/led.c54
-rw-r--r--keyboard/lightsaber/matrix.c292
10 files changed, 0 insertions, 839 deletions
diff --git a/keyboard/lightsaber/Makefile.lufa b/keyboard/lightsaber/Makefile.lufa
deleted file mode 100644
index 99090c4367..0000000000
--- a/keyboard/lightsaber/Makefile.lufa
+++ /dev/null
@@ -1,126 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-# Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = lightsaber_lufa
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = keymap.c \
- matrix.c \
- led.c \
- backlight.c
-
-CONFIG_H = config.h
-
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 8000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-#MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-
-
-# Boot Section Size in bytes
-# Teensy halfKay 512
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol/lufa.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
-
-winkey: OPT_DEFS += -DLAYOUT_WINKEY
-winkey: all
diff --git a/keyboard/lightsaber/Makefile.pjrc b/keyboard/lightsaber/Makefile.pjrc
deleted file mode 100644
index 0f6d399470..0000000000
--- a/keyboard/lightsaber/Makefile.pjrc
+++ /dev/null
@@ -1,94 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-# Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = lightsaber_pjrc
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = keymap.c \
- matrix.c \
- led.c \
- backlight.c
-
-CONFIG_H = config.h
-
-
-# MCU name
-MCU = atmega32u4
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 8000000
-
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-#MOUSEKEY_ENABLE = yes # Mouse keys(+5000)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+600)
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes # USB Nkey Rollover(+500)
-#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol/pjrc.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
-
-winkey: OPT_DEFS += -DLAYOUT_WINKEY
-winkey: all
diff --git a/keyboard/lightsaber/README.md b/keyboard/lightsaber/README.md
deleted file mode 100644
index 9dcd693095..0000000000
--- a/keyboard/lightsaber/README.md
+++ /dev/null
@@ -1,26 +0,0 @@
-Lightsaber keyboard firmware
-======================
-Korean custom keyboard designed by Duck.
-
-*Note that this is not the official firmware*
-
-Supported models
-----------------
-All pcb options are supported.
-
-
-Build
------
-Move to this directory then just run `make` like:
-
- $ make -f Makefile.[pjrc|lufa]
-
-Use `Makefile.pjrc` if you want to use PJRC stack or use `Makefile.lufa` for LUFA stack.
-
-
-Bootloader
----------
-The PCB is hardwired to run the bootloader if the key at the `one above backspace` position is held down when connecting the keyboard.
-
-It is still possible to use Boot Magic and Command to access the bootloader though.
-
diff --git a/keyboard/lightsaber/backlight.c b/keyboard/lightsaber/backlight.c
deleted file mode 100644
index 59b8b4a633..0000000000
--- a/keyboard/lightsaber/backlight.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
-Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include "backlight.h"
-
-/* Backlight pin configuration
- *
- * Alphas PB1 (high)
- * Numeric PB2 (high)
- * Mod+Num PB3 (high)
- * Backside PD6 (high)
- * TopRight PD7 (low)
- * F-Row PE6 (high)
- */
-
-void backlight_set(uint8_t level)
-{
- // Set as output.
- DDRB |= (1<<1) | (1<<2) | (1<<3);
- DDRD |= (1<<6) | (1<<7);
- DDRE |= (1<<6);
-
- if (level & BACKLIGHT_ALPHA)
- {
- PORTB |= (1<<1);
- }
- else
- {
- PORTB &= ~(1<<1);
- }
- if (level & BACKLIGHT_NUMERIC)
- {
- PORTB |= (1<<2);
- }
- else
- {
- PORTB &= ~(1<<2);
- }
- if (level & BACKLIGHT_MODNUM)
- {
- PORTB |= (1<<3);
- }
- else
- {
- PORTB &= ~(1<<3);
- }
- if (level & BACKLIGHT_BACKSIDE)
- {
- PORTD |= (1<<6);
- }
- else
- {
- PORTD &= ~(1<<6);
- }
- if (level & BACKLIGHT_TOPRIGHT)
- {
- PORTD &= ~(1<<7);
- }
- else
- {
- PORTD |= (1<<7);
- }
- if (level & BACKLIGHT_FROW)
- {
- PORTE |= (1<<6);
- }
- else
- {
- PORTE &= ~(1<<6);
- }
-}
diff --git a/keyboard/lightsaber/backlight.h b/keyboard/lightsaber/backlight.h
deleted file mode 100644
index 6dc7967a62..0000000000
--- a/keyboard/lightsaber/backlight.h
+++ /dev/null
@@ -1,9 +0,0 @@
-
-enum backlight_level {
- BACKLIGHT_ALPHA = 0b0000001,
- BACKLIGHT_NUMERIC = 0b0000010,
- BACKLIGHT_MODNUM = 0b0000100,
- BACKLIGHT_BACKSIDE = 0b0001000,
- BACKLIGHT_TOPRIGHT = 0b0010000,
- BACKLIGHT_FROW = 0b0100000,
-};
diff --git a/keyboard/lightsaber/config.h b/keyboard/lightsaber/config.h
deleted file mode 100644
index d971d038e3..0000000000
--- a/keyboard/lightsaber/config.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
-Copyright 2013 Mathias Andersson <wraul@dbox.se>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6050
-#define DEVICE_VER 0x0104
-#define MANUFACTURER Duck
-#define PRODUCT Lightsaber
-
-/* message strings */
-#define DESCRIPTION t.m.k. keyboard firmware for Lightsaber
-
-/* matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 18
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 1
-
-/* Set 0 if need no debouncing */
-#define DEBOUNCE 5
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-#endif
diff --git a/keyboard/lightsaber/keymap.c b/keyboard/lightsaber/keymap.c
deleted file mode 100644
index 477da9d865..0000000000
--- a/keyboard/lightsaber/keymap.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
-Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * Keymap for Lightsaber controller
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "action.h"
-#include "action_macro.h"
-#include "report.h"
-#include "host.h"
-#include "debug.h"
-#include "keymap.h"
-
-// Convert physical keyboard layout to matrix array.
-// This is a macro to define keymap easily in keyboard layout form.
-#define KEYMAP( \
- K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, \
- K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, K4Q, K4R, \
- K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3O, K3P, K3Q, K3R, \
- K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, K2O, K2P, K2Q, K2R, \
- K1A, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1O, K1P, K1Q, K1R, \
- K0A, K0B, K0C, K0G, K0K, K0L, K0M, K0N, K0O, K0P, K0Q, K0R \
-) { \
-/* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 */ \
-/* 5 */ { KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F, KC_##K5G, KC_##K5H, KC_##K5I, KC_##K5J, KC_##K5K, KC_##K5L, KC_##K5M, KC_##K5N, KC_##K5O, KC_##K5P, KC_##K5Q, KC_##K5R}, \
-/* 4 */ { KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F, KC_##K4G, KC_##K4H, KC_##K4I, KC_##K4J, KC_##K4K, KC_##K4L, KC_##K4M, KC_##K4N, KC_##K4O, KC_##K4P, KC_##K4Q, KC_##K4R}, \
-/* 3 */ { KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F, KC_##K3G, KC_##K3H, KC_##K3I, KC_##K3J, KC_##K3K, KC_##K3L, KC_##K3M, KC_##K3N, KC_##K3O, KC_##K3P, KC_##K3Q, KC_##K3R}, \
-/* 2 */ { KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F, KC_##K2G, KC_##K2H, KC_##K2I, KC_##K2J, KC_##K2K, KC_##K2L, KC_##K2M, KC_##K2N, KC_##K2O, KC_##K2P, KC_##K2Q, KC_##K2R}, \
-/* 1 */ { KC_##K1A, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F, KC_##K1G, KC_##K1H, KC_##K1I, KC_##K1J, KC_##K1K, KC_##K1L, KC_NO, KC_##K1M, KC_##K1N, KC_##K1O, KC_##K1P, KC_##K1Q, KC_##K1R}, \
-/* 0 */ { KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_NO, KC_##K0G, KC_NO, KC_NO, KC_##K0K, KC_NO, KC_##K0L, KC_NO, KC_##K0M, KC_##K0N, KC_##K0O, KC_##K0P, KC_##K0Q, KC_##K0R} \
-}
-
-#include "keymap_winkey.h"
-
-#define KEYMAPS_SIZE (sizeof(keymaps) / sizeof(keymaps[0]))
-#define FN_ACTIONS_SIZE (sizeof(fn_actions) / sizeof(fn_actions[0]))
-
-/* translates key to keycode */
-uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
-{
- if (layer < KEYMAPS_SIZE) {
- return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
- } else {
- // fall back to layer 0
- return pgm_read_byte(&keymaps[0][(key.row)][(key.col)]);
- }
-}
-
-/* translates Fn keycode to action */
-action_t keymap_fn_to_action(uint8_t keycode)
-{
- action_t action;
- if (FN_INDEX(keycode) < FN_ACTIONS_SIZE) {
- action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
- } else {
- action.code = ACTION_NO;
- }
- return action;
-}
diff --git a/keyboard/lightsaber/keymap_winkey.h b/keyboard/lightsaber/keymap_winkey.h
deleted file mode 100644
index 3e8367083c..0000000000
--- a/keyboard/lightsaber/keymap_winkey.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#include "backlight.h"
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- KEYMAP(\
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, INS, PSCR, SLCK, BRK, \
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NUMLOCK,KP_SLASH,KP_ASTERISK,KP_MINUS, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, KP_7, KP_8, KP_9, KP_PLUS, \
- CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,FN0, ENT, KP_4, KP_5, KP_6, NO, \
- LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,NO, RSFT, KP_1, KP_2, KP_3, KP_ENTER, \
- LCTL,LGUI,LALT, SPC, NO, RALT,RGUI,RCTL, KP_0, NO, KP_DOT, NO), \
- KEYMAP(\
- CALC,MYCM,WSCH,WHOM,MAIL,MUTE,VOLD,VOLU,MSEL,MSTP,MPLY,MPRV,MNXT,TRNS, TRNS, WAKE, PWR, SLEP, \
- FN1, FN2, FN3, FN4, FN5, FN6, FN7, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, \
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, \
- TRNS,TRNS,TRNS,TRNS,PGDN,TRNS,LEFT,DOWN,UP ,RGHT,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, \
- TRNS, TRNS,TRNS,TRNS,TRNS,PGUP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, \
- TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS)
-};
-
-static const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_LAYER_MOMENTARY(1),
- [1] = ACTION_BACKLIGHT_TOGGLE(),
- [2] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_ALPHA),
- [3] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_MODNUM),
- [4] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_NUMERIC),
- [5] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_FROW),
- [6] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_BACKSIDE),
- [7] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_TOPRIGHT)
-};
diff --git a/keyboard/lightsaber/led.c b/keyboard/lightsaber/led.c
deleted file mode 100644
index c3f85427f5..0000000000
--- a/keyboard/lightsaber/led.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
-Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include "stdint.h"
-#include "led.h"
-
-/* LED pin configuration
- *
- * Caps PB0 (low)
- * NumLock PB4 (low)
- *
- */
-void led_set(uint8_t usb_led)
-{
- // Set as output.
- DDRB |= (1<<0) | (1<<4);
-
- if (usb_led & (1<<USB_LED_CAPS_LOCK))
- {
- // Output low.
- PORTB &= ~(1<<0);
- }
- else
- {
- // Output high.
- PORTB |= (1<<0);
- }
-
- if (usb_led & (1<<USB_LED_NUM_LOCK))
- {
- // Output low.
- PORTB &= ~(1<<4);
- }
- else
- {
- // Output high.
- PORTB |= (1<<4);
- }
-}
diff --git a/keyboard/lightsaber/matrix.c b/keyboard/lightsaber/matrix.c
deleted file mode 100644
index e3eca84df8..0000000000
--- a/keyboard/lightsaber/matrix.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
-Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 0
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static uint8_t read_rows(void);
-static uint8_t read_fwkey(void);
-static void init_rows(void);
-static void unselect_cols(void);
-static void select_col(uint8_t col);
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- unselect_cols();
- init_rows();
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
-}
-
-uint8_t matrix_scan(void)
-{
- for (uint8_t col = 0; col < MATRIX_COLS; col++) { // 0-17
- select_col(col);
- _delay_us(3); // TODO: Determine the correct value needed here.
- uint8_t rows = read_rows();
- // Use the otherwise unused col: 12 row: 3 for firmware.
- if(col == 12) {
- rows |= read_fwkey();
- }
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) { // 0-5
- bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
- bool curr_bit = rows & (1<<row);
- if (prev_bit != curr_bit) {
- matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
- if (debouncing) {
- dprint("bounce!: "); dprintf("%02X", debouncing); dprintln();
- }
- debouncing = DEBOUNCE;
- }
- }
- unselect_cols();
- }
-
- if (debouncing) {
- if (--debouncing) {
- _delay_ms(1);
- } else {
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = matrix_debouncing[i];
- }
- }
- }
-
- return 1;
-}
-
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += bitpop32(matrix[i]);
- }
- return count;
-}
-
-/* Row pin configuration
- * row: 0 1 2 3 4 5
- * pin: PD0 PD1 PD2 PD3 PD5 PB7
- *
- * Firmware uses its own pin PE2
- */
-static void init_rows(void)
-{
- // Input (DDR:0, PORT:0)
- DDRD &= ~0b00101111;
- PORTD &= ~0b00101111;
- DDRB &= ~(1<<7);
- PORTB &= ~(1<<7);
-
- // Input with pull-up (DDR:0, PORT:1)
- DDRE &= ~(1<<2);
- PORTE |= (1<<2);
-}
-
-static uint8_t read_rows(void)
-{
- return (PIND&(1<<0) ? (1<<0) : 0) |
- (PIND&(1<<1) ? (1<<1) : 0) |
- (PIND&(1<<2) ? (1<<2) : 0) |
- (PIND&(1<<3) ? (1<<3) : 0) |
- (PIND&(1<<5) ? (1<<4) : 0) |
- (PINB&(1<<7) ? (1<<5) : 0);
-}
-
-static uint8_t read_fwkey(void)
-{
- return PINE&(1<<2) ? 0 : (1<<3);
-}
-
-/* Columns 0 - 15
- * These columns uses two 74HC237D 3 to 8 bit demultiplexers.
- * col / pin: PC6 PB6 PF0 PF1 PC7
- * 0: 1 0 0 0 0
- * 1: 1 0 1 0 0
- * 2: 1 0 0 1 0
- * 3: 1 0 1 1 0
- * 4: 1 0 0 0 1
- * 5: 1 0 1 0 1
- * 6: 1 0 0 1 1
- * 7: 1 0 1 1 1
- * 8: 0 1 0 0 0
- * 9: 0 1 1 0 0
- * 10: 0 1 0 1 0
- * 11: 0 1 1 1 0
- * 12: 0 1 0 0 1
- * 13: 0 1 1 0 1
- * 14: 0 1 0 1 1
- * 15: 0 1 1 1 1
- *
- * col: 16
- * pin: PB5
- *
- * col: 17
- * pin: PD4
- */
-static void unselect_cols(void)
-{
- DDRB |= (1<<5) | (1<<6);
- PORTB &= ~((1<<5) | (1<<6));
-
- DDRC |= (1<<6) | (1<<7);
- PORTC &= ~((1<<6) | (1<<7));
-
- DDRD |= (1<<4);
- PORTD &= ~(1<<4);
-
- DDRF |= (1<<0) | (1<<1);
- PORTF &= ~((1<<0) | (1<<1));
-}
-
-static void select_col(uint8_t col)
-{
- // Output high (DDR:1, PORT:1) to select
- switch (col) {
- case 0:
- PORTC |= (1<<6);
- break;
- case 1:
- PORTC |= (1<<6);
- PORTF |= (1<<0);
- break;
- case 2:
- PORTC |= (1<<6);
- PORTF |= (1<<1);
- break;
- case 3:
- PORTC |= (1<<6);
- PORTF |= (1<<0) | (1<<1);
- break;
- case 4:
- PORTC |= (1<<6);
- PORTC |= (1<<7);
- break;
- case 5:
- PORTC |= (1<<6);
- PORTF |= (1<<0);
- PORTC |= (1<<7);
- break;
- case 6:
- PORTC |= (1<<6);
- PORTF |= (1<<1);
- PORTC |= (1<<7);
- break;
- case 7:
- PORTC |= (1<<6);
- PORTF |= (1<<0) | (1<<1);
- PORTC |= (1<<7);
- break;
- case 8:
- PORTB |= (1<<6);
- break;
- case 9:
- PORTB |= (1<<6);
- PORTF |= (1<<0);
- break;
- case 10:
- PORTB |= (1<<6);
- PORTF |= (1<<1);
- break;
- case 11:
- PORTB |= (1<<6);
- PORTF |= (1<<0) | (1<<1);
- break;
- case 12:
- PORTB |= (1<<6);
- PORTC |= (1<<7);
- break;
- case 13:
- PORTB |= (1<<6);
- PORTF |= (1<<0);
- PORTC |= (1<<7);
- break;
- case 14:
- PORTB |= (1<<6);
- PORTF |= (1<<1);
- PORTC |= (1<<7);
- break;
- case 15:
- PORTB |= (1<<6);
- PORTF |= (1<<0) | (1<<1);
- PORTC |= (1<<7);
- break;
- case 16:
- PORTB |= (1<<5);
- break;
- case 17:
- PORTD |= (1<<4);
- break;
- }
-}